A single Python script that scans your Movies / TV Shows folders, looks each one up on TMDb, and renames everything into clean, Plex-friendly names: folders, video files, season folders, and subtitles.

No installation, no dependencies, nothing to compile. It's one .py file that runs anywhere Python runs: Mac, Windows, or Linux.

This guide assumes you've never used Python or GitHub before. If you already know your way around both, skip to Quick Start.

What it does

Matches your existing folder names against TMDb and renames them to Movie Name (Year) / Show Name (Year) format
Renames video files to match, and organizes TV episodes into S01, S02, etc. season folders
Detects loose movie files sitting directly in the share root (no folder of their own) and organizes them into a proper movie folder
Detects a duplicate show folder for a show you already have (e.g. a separately-downloaded "Show S02" folder) and merges its episodes into the existing show folder instead of creating a second one
Checks your organized TV shows against TMDb's episode list and reports any already-aired episodes you're missing (-e), without changing anything
Finds subtitle files, figures out which one matches your primary language (by filename, and by reading the file's content/metadata if the filename doesn't say), and renames it to match the video. Defaults to English, but follows whatever language you've set for TMDb results (see Non-English users).
Optionally cleans up junk files/folders (samples, .nfo, .txt, screenshots, unwanted-language subtitles) into a local trash folder. Nothing is deleted permanently, and every cleanup can be reversed.
Fully customizable naming convention (names.yaml): change S01 to Season 01, use dots instead of spaces, uppercase everything, rename the "Subs" folder to something else, etc.
Every rename is logged, and can be undone with one command
Works on Mac, Linux, and Windows

Nothing this script does is destructive by default. It asks for confirmation before renaming anything (unless you pass -y), and everything it changes is logged so it can be undone.

Requirements

Python 3.8 or later. That's it. No other software or packages are required.
A free TMDb account, to get an API key. Takes about 2 minutes, and is covered below.

Quick Start

1. Install Python

Windows 11:

Open PowerShell (search "PowerShell" in the Start menu) and run:

winget install Python.Python.3.14

Close and reopen PowerShell afterward, then check it worked:

python --version

If winget doesn't work on your machine, download the installer from python.org/downloads instead. Important: on the first screen of the installer, check the box that says "Add python.exe to PATH" before clicking Install. This is the single most common thing people miss, and without it Windows won't recognize the python command.

Mac:

Macs usually already have Python 3 installed. Open Terminal (search "Terminal" in Spotlight) and run:

python3 --version

If that fails, download the installer from python.org/downloads and run it.

Linux:

Almost every Linux distribution comes with Python 3 preinstalled. Confirm with:

python3 --version

If it's missing, install it with your distro's package manager, e.g. sudo apt install python3 on Ubuntu/Debian.

2. Download this repository

If you've never used GitHub before: this page is a "repository" (a folder of files), and you don't need a GitHub account or git installed just to download it.

Click the green "Code" button near the top of this page
Click "Download ZIP"
Once it's downloaded, extract/unzip it somewhere you'll remember (e.g. your Desktop or Downloads folder)

(If you do have git installed and prefer it, git clone this repository's URL instead.)

3. Get a free TMDb API key

The script uses TMDb (The Movie Database) to look up correct titles and years. This is free.

Log in or create a free account: https://www.themoviedb.org/login
Request an API key: https://www.themoviedb.org/settings/api/request
Choose "Developer" when asked what type of key
Fill in the short form (you can use placeholder info for personal/non-commercial use)
On the resulting settings page, copy the value labeled "API Key" (the short one, not the longer "API Read Access Token")

You don't need to do anything with this key yet. The script will ask for it the first time you run it.

4. Run it

Open a terminal in the folder you extracted:

Windows: open the extracted folder in File Explorer, click the address bar, type powershell, and press Enter
Mac/Linux: open Terminal, then cd into the folder, e.g. cd ~/Downloads/plex-library-tool

Then run:

python plex-library-tool.py -r

(On Mac/Linux, use python3 instead of python if python isn't recognized.)

The first time you run it, it'll ask you to paste in the TMDb API key from step 3, and offer to save it to a local .env file so you're never asked again. That file stays on your computer and is never uploaded anywhere.

5. Point it at your media

After the API key step, the script will either:

automatically find SMB/network shares mounted on your computer and let you pick one, or
you can skip that entirely by giving it a path directly:

python plex-library-tool.py -r "/path/to/your/Movies"

python plex-library-tool.py -r "D:\Movies"

It'll then walk through each folder, look it up, show you the proposed rename, and ask for confirmation before doing anything.

Tip: before renaming anything for real, run it with -t (test mode) first to preview what it would do without changing anything:

python plex-library-tool.py -r "/path/to/your/Movies" -t

Command reference

Flag	What it does
`-r`, `--rename [PATH]`	Scan and rename a share. Pass a path to skip the share-selection prompt.
`-c`, `--cleanup [PATH]`	Move junk files/folders (per `delete.yaml`) to a local trash folder.
`-e`, `--episodes [PATH]`	Check TV shows against TMDb's episode list and report any missing (already-aired) episodes. Read-only, makes no changes.
`-t`, `--test [N]`	Preview only. No changes are made. Optionally limit how many folders are shown.
`-y`, `--yes`	Don't ask for confirmation before each rename.
`-f`, `--force`	Force a full scan even if nothing looks like it changed since the last run.
`-v`, `--verbose`	Print detailed diagnostic output about what the script is doing and why.
`-m`, `--manual-rename CURRENT NEW`	Manually rename one specific folder/file, bypassing TMDb entirely.
`--backup`	Snapshot current names to a log file without changing anything.
`--restore [LOGFILE]`	Undo a previous run using its log file. Pick from a list if no file is given.
`-u`, `--undo`	Instantly undo the most recent run, no need to look up a log filename. Can't be combined with any other flag.

Flags can be combined, e.g. -rc runs rename and cleanup back to back on the same share, -rf forces a full rename scan, -ty previews everything without prompting.

Configuration files

These live alongside the script and are all optional. The script works out of the box with sensible defaults. Every file is fully documented with comments and examples inside it.

names.yaml: customize the naming convention. Folder/file name format, season folder naming (S01 vs Season 01), separators (spaces vs dots vs underscores), uppercase/lowercase, whether to include resolution tags like 1080p, and the subtitle folder name (e.g. rename "Subs" to "Subtitles" or any word in your own language).
delete.yaml: what cleanup moves to trash. Folder name patterns (e.g. sample, extras), file name/extension patterns, and subtitle language rules (e.g. "only keep Spanish subtitles").

Non-English users

TMDb can return movie/show titles in your own language instead of English (e.g. Spanish, French, German titles). The first time you run the script, it detects your system's language and asks you to confirm before saving it to .env. You can also set it yourself at any time by adding a line to .env:

TMDB_LANGUAGE=es-MX

Use any TMDb-supported language code (ISO 639-1, optionally with a region, e.g. en-US, fr-FR, de-DE, ja-JP). This also decides which subtitle language is treated as primary: whichever subtitle file matches TMDB_LANGUAGE gets renamed to match the video (e.g. Movie.es.srt for Spanish), and everything else keeps its original filename. The script's own prompts and status messages (like "Renamed folder:") stay in English regardless of this setting.

Safety

Nothing is renamed without asking first, unless you pass -y.
Every rename is logged to a logs/ folder created next to the script.
Cleanup never permanently deletes anything. Matched files/folders are moved to a local .trash/ folder, not deleted, and you're prompted per item unless -y is used.
Undo anytime with -u (most recent run) or --restore <logfile> (any past run).
Your TMDb API key is never uploaded anywhere. It's stored locally in a .env file, which is excluded from Git via .gitignore.

Disclaimer

This script is provided as-is, with no warranty. Always test with -t before renaming for real, and keep backups of anything irreplaceable. The author is not responsible for any lost, corrupted, or misplaced files resulting from the use of this script.

Renaming a file changes its modification time, which Plex uses to decide when to re-analyze a video for things like intro/credit markers. After renaming a large batch of files, Plex may re-scan and re-analyze them, which can spike your Plex server's CPU usage for a while. This is normal and temporary; performance should return to normal once Plex finishes catching up, and is usually tolerable even for large libraries.

Troubleshooting

'python' is not recognized as an internal or external command (Windows) Python isn't on your PATH. Reinstall using the winget command above, or rerun the python.org installer and make sure "Add python.exe to PATH" is checked.

No SMB shares found. The script couldn't auto-detect a network share. Pass the path directly instead: python plex-library-tool.py -r "Z:\Movies" (Windows) or python plex-library-tool.py -r "/Volumes/Movies" (Mac).

No match found (Ignoring): <name> TMDb couldn't confidently match that folder to a title. This is intentionally conservative: the script would rather skip a folder than rename it wrong. You can rename it manually with -m "current name" "new name", or clean up the raw folder name a bit and try again.

I want to undo something Run python plex-library-tool.py -u to instantly undo the most recent run, or python plex-library-tool.py --restore to pick from any past run.