## Summary
- Rewrite OpdsParser to stream parsing instead of full content
- Fix OOM due to big http xml response
Closes#385
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? _**NO**_
## Summary
When uploading or downloading an updated ebook from SD/WebUI/OPDS with
same the filename the `.crosspoint` cache is not cleared. This can lead
to issues with the Table of Contents and hangs when switching between
chapters.
I encountered this issue in two places:
- When I need to do further ePub cleaning using Calibre after I load an
ePub and find that some of its formatting should be cleaned up. When I
reprocess the same book and want to place it back in the same location I
need a way to invalidate the cache.
- When syncing RSS feed generated epubs. I generate news ePubs with
filenames like `news-outlet.epub` and so every day when I fetch new news
the crosspoint cache needs to be cleared to load that file.
This change offers the following features:
- On web uploads, if the file already exists, the cache for that file is
cleared
- On OPDS downloads, if the file already exists, the cache for that file
is cleared
- There's now an action for `Clear Cache` in the Settings page which can
clear the cache for all books
Addresses
https://github.com/crosspoint-reader/crosspoint-reader/issues/281
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? PARTIALLY
---------
Co-authored-by: Dave Allie <dave@daveallie.com>
## Summary
* Disables going to sleep after uploading new firmware
* Makes developer experience easier
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? _**< NO >**_
---------
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
## Summary
Give space to the chapter title if we don't show battery percentage.
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? _**NO**_
---------
Co-authored-by: Dave Allie <dave@daveallie.com>
## Summary
* Include superscripts and subscripts in fonts
## Additional Context
* Original change came from
https://github.com/crosspoint-reader/crosspoint-reader/pull/248
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? No
---------
Co-authored-by: cor <cor@pruijs.dev>
# Summary
This PR introduces a reusable Tab Bar component and combines the Recent
Books and File Browser into a unified tabbed page called "My Library"
accessible from the Home screen.
## Features
### New Tab Bar Component
A flexible, reusable tab bar component added to `ScreenComponents` that
can be used throughout the application.
### New Scroll Indicator Component
A page position indicator for lists that span multiple pages.
**Features:**
- Up/down arrow indicators
- Current page fraction display (e.g., "1/3")
- Only renders when content spans multiple pages
### My Library Activity
A new unified view combining Recent Books and File Browser into a single
tabbed page.
**Tabs:**
- **Recent** - Shows recently opened books
- **Files** - Browse SD card directory structure
**Navigation:**
- Up/Down or Left/Right: Navigate through list items
- Left/Right (when first item selected): Switch between tabs
- Confirm: Open selected book or enter directory
- Back: Go up directory (Files tab) or return home
- Long press Back: Jump to root directory (Files tab)
**UI Elements:**
- Tab bar with selection indicator
- Scroll/page indicator on right side
- Side button hints (up/down arrows)
- Dynamic bottom button labels ("BACK" in subdirectories, "HOME" at
root)
## Tab Bar Usage
The tab bar component is designed to be reusable across different
activities. Here's how to use it:
### Basic Example
```cpp
#include "ScreenComponents.h"
void MyActivity::render() const {
renderer.clearScreen();
// Define tabs with labels and selection state
std::vector<TabInfo> tabs = {
{"Tab One", currentTab == 0}, // Selected when currentTab is 0
{"Tab Two", currentTab == 1}, // Selected when currentTab is 1
{"Tab Three", currentTab == 2} // Selected when currentTab is 2
};
// Draw tab bar at Y position 15, returns height of the tab bar
int tabBarHeight = ScreenComponents::drawTabBar(renderer, 15, tabs);
// Position your content below the tab bar
int contentStartY = 15 + tabBarHeight + 10; // Add some padding
// Draw content based on selected tab
if (currentTab == 0) {
renderTabOneContent(contentStartY);
} else if (currentTab == 1) {
renderTabTwoContent(contentStartY);
} else {
renderTabThreeContent(contentStartY);
}
renderer.displayBuffer();
}
```
Video Demo: https://share.cleanshot.com/P6NBncFS
<img width="250"
src="https://github.com/user-attachments/assets/07de4418-968e-4a88-9b42-ac5f53d8a832"
/>
<img width="250"
src="https://github.com/user-attachments/assets/e40201ed-dcc8-4568-b008-cd2bf13ebb2a"
/>
<img width="250"
src="https://github.com/user-attachments/assets/73db269f-e629-4696-b8ca-0b8443451a05"
/>
---------
Co-authored-by: Dave Allie <dave@daveallie.com>
## Summary
* **What is the goal of this PR?** (e.g., Fixes a bug in the user
authentication module, Implements the new feature for
file uploading.)
As we get more settings, I think it makes sense to do categories for
them. This just allows users to find the settings easier and navigate to
them.
* **What changes are included?**
## Additional Context
* Add any other information that might be helpful for the reviewer
(e.g., performance implications, potential risks, specific areas to
focus on).
Co-authored-by: dpoulter <daniel@yoco.com>
Co-authored-by: Dave Allie <dave@daveallie.com>
## Summary
* **What is the goal of this PR?** (e.g., Implements the new feature for
file uploading.)
- Implements a fix to truncate chapter names that exceeds display width
* **What changes are included?**
- Implements a fix to truncate chapter names that exceeds display width
## Additional Context
* Add any other information that might be helpful for the reviewer
(e.g., performance implications, potential risks,
specific areas to focus on).
- Prior to the fix, if the book contains multiple chapters with names
longer than the display width, there is a noticeable delay when
scrolling through the list of chapters.
Serial output of the issue:
```
[25673] [ACT] Entering activity: EpubReaderChapterSelection
[25693] [GFX] !! Outside range (485, 65) -> (65, -6)
[25693] [GFX] !! Outside range (486, 65) -> (65, -7)
[25693] [GFX] !! Outside range (487, 65) -> (65, -8)
[25693] [GFX] !! Outside range (488, 65) -> (65, -9)
[25693] [GFX] !! Outside range (485, 66) -> (66, -6)
[25693] [GFX] !! Outside range (486, 66) -> (66, -7)
[25694] [GFX] !! Outside range (487, 66) -> (66, -8)
[25694] [GFX] !! Outside range (484, 67) -> (67, -5)
[25694] [GFX] !! Outside range (485, 67) -> (67, -6)
[25694] [GFX] !! Outside range (486, 67) -> (67, -7)
[25694] [GFX] !! Outside range (483, 68) -> (68, -4)
[25694] [GFX] !! Outside range (484, 68) -> (68, -5)
[25694] [GFX] !! Outside range (485, 68) -> (68, -6)
```
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? _**NO**_
Co-authored-by: Dave Allie <dave@daveallie.com>
## Summary
* Adds (optional) Hyphenation for English, French, German, Russian
languages
## Additional Context
* Included hyphenation dictionaries add approximately 280kb to the flash
usage (German alone takes 200kb)
* Trie encoded dictionaries are adopted from hypher project
(https://github.com/typst/hypher)
* Soft hyphens (and other explicit hyphens) take precedence over
dict-based hyphenation. Overall, the hyphenation rules are quite
aggressive, as I believe it makes more sense on our smaller screen.
---------
Co-authored-by: Dave Allie <dave@daveallie.com>
## Summary
* Fixes#388
## Additional Context
* Tested on my own device
* See images at #388 for what home screen looked like before.
* With this PR the home screen shows the following (selected and
unselected recent book × cover image rendered or not)
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? **YES**
---------
Co-authored-by: copilot-swe-agent[bot] <198982749+Copilot@users.noreply.github.com>
## Summary
- Adds KOReader progress sync integration, allowing CrossPoint to sync
reading positions with other
KOReader-compatible devices
- Stores credentials securely with XOR obfuscation
- Uses KOReader's partial MD5 document hashing for cross-device book
matching
- Syncs position via percentage with estimated XPath for compatibility
# Features
- Settings: KOReader Username, Password, and Authenticate options
- Sync from chapters menu: "Sync Progress" option appears when
credentials are configured
- Bidirectional sync: Can apply remote progress or upload local progress
---------
Co-authored-by: Dave Allie <dave@daveallie.com>
## Summary
* This PR solves issue
https://github.com/crosspoint-reader/crosspoint-reader/issues/357 in the
first commit
* I then added an additional commit which means when you reach the end
of the keyboard, if you go 'beyond', you wrap back to the other side.
* This replaces existing behaviour, so if you would rather this be
removed, let me know and I'll just do the `caps` -> `shift` change
## Additional Context
### Screenshots for the new shift display
I thought it might not fit and need column size changes, but ended up
fitting fine, see screenshots showing this below:
<img width="573" height="366" alt="image"
src="https://github.com/user-attachments/assets/b8f6a4ec-94f5-4f5e-b9a6-06cc5f250ddb"
/>
<img width="570" height="308" alt="image"
src="https://github.com/user-attachments/assets/7d775518-4784-4120-a20a-a9dc67af8565"
/>
### Gif showing the wrap-around of the text
---
### AI Usage
Did you use AI tools to help write this code? **PARTIALLY** - used to
double check the text wrapping had no edge-cases. (It did also suggest
rewriting the function, but I decided that was too big of a change for a
working part of the codebase, for now!)
## Summary
* Implements #380, allowing the user to see the device's MAC address in
order to register on wifi networks
## Additional Context
* Although @markatlnk suggested showing on the settings screen, I
implemented display at the bottom of the WiFi Networks selection screen
(accessed via "File Transfer" > "Join a Network") since I think it makes
more sense there.
* Tested on my own device
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? _**YES**_
---------
Co-authored-by: copilot-swe-agent[bot] <198982749+Copilot@users.noreply.github.com>
## Summary
* This builds upon the helpful PR
https://github.com/crosspoint-reader/crosspoint-reader/pull/341, and
adds support for the setting to also apply to the XTC reader, which I
believed has just been missed and was not intentionally left out.
* XTC does not have chapter support yet, but it does skip 10 pages when
long-pressed, and so I think this is useful.
---
### AI Usage
Did you use AI tools to help write this code? No
## Summary
* **What is the goal of this PR?** Fix WiFi file transfer stability
issues (especially crashes during uploads) and improve upload speed via
WebSocket binary protocol. File transfers now don't really crash as
much, if they do it recovers and speed has gone form 50KB/s to 300+KB/s.
* **What changes are included?**
- **WebSocket upload support** - Adds WebSocket binary protocol for file
uploads, achieving faster speeds 335 KB/s vs HTTP multipart)
- **Watchdog stability fixes** - Adds `esp_task_wdt_reset()` calls
throughout upload path to prevent watchdog timeouts during:
- File creation (FAT allocation can be slow)
- SD card write operations
- HTTP header parsing
- WebSocket chunk processing
- **4KB write buffering** - Batches SD card writes to reduce I/O
overhead
- **WiFi health monitoring** - Detects WiFi disconnection in STA mode
and exits gracefully
- **Improved handleClient loop** - 500 iterations with periodic watchdog
resets and button checks for responsiveness
- **Progress bar improvements** - Fixed jumping/inaccurate progress by
capping local progress at 95% until server confirms completion
- **Exit button responsiveness** - Button now checked inside the
handleClient loop every 64 iterations
- **Reduced exit delays** - Decreased shutdown delays from ~850ms to
~140ms
**Files changed:**
- `platformio.ini` - Added WebSockets library dependency
- `CrossPointWebServer.cpp/h` - WebSocket server, upload buffering,
watchdog resets
- `CrossPointWebServerActivity.cpp` - WiFi monitoring, improved loop,
button handling
- `FilesPage.html` - WebSocket upload JavaScript with HTTP fallback
## Additional Context
- WebSocket uses 4KB chunks with backpressure management to prevent
ESP32 buffer overflow
- Falls back to HTTP automatically if WebSocket connection fails
- The main bottleneck now is SD card write speed (~44% of transfer
time), not WiFi
- STA mode was more prone to crashes than AP mode due to external
network factors; WiFi health monitoring helps detect and handle
disconnections gracefully
---
### AI Usage
Did you use AI tools to help write this code? _**YES**_ Claude did it
ALL, I have no idea what I am doing, but my books transfer fast now.
---------
Co-authored-by: Claude <noreply@anthropic.com>
## Summary
Adds a new "Long-press Chapter Skip" toggle in Settings to control
whether holding the side buttons skips chapters.
I kept accidentally triggering chapter skips while reading, which caused
me to lose my place in the middle of long chapters.
## Additional Context
* Add any other information that might be helpful for the reviewer
(e.g., performance implications, potential risks,
specific areas to focus on).
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? _**PARTIALLY **_
## Summary
Adds define to omit optional fonts from the build. This reduces time to
flash from >31s to <13s. Useful for development that doesn't require
fonts. Addresses #193
Invoke it like this during development:
`PLATFORMIO_BUILD_FLAGS="-D OMIT_FONTS" pio run --target upload && pio
device monitor`
Changing the define causes `pio` to do a full rebuild (but it will be
quick if you keep the define).
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? NO
## Summary
* **What is the goal of this PR?**
Add support for reading plain text (.txt) files, enabling users to
browse, read, and track progress in TXT documents alongside existing
EPUB and XTC formats.
* **What changes are included?**
- New Txt library for loading and parsing plain text files
- New TxtReaderActivity with streaming page rendering using 8KB chunks
to handle large files without memory issues on ESP32-C3
- Page index caching system (index.bin) for instant re-open after sleep
or app restart
- Progress bar UI during initial file indexing (matching EPUB style)
- Word wrapping with proper UTF-8 support
- Cover image support for TXT files:
- Primary: image with same filename as TXT (e.g., book.jpg for book.txt)
- Fallback: cover.bmp/jpg/jpeg in the same folder
- JPG to BMP conversion using existing converter
- Sleep screen cover mode now works with TXT files
- File browser now shows .txt files
## Additional Context
* Add any other information that might be helpful for the reviewer
* Memory constraints: The streaming approach was necessary because
ESP32-C3 only has 320KB RAM. A 700KB TXT file cannot be loaded entirely
into memory, so we read 8KB chunks and build a page offset index
instead.
* Cache invalidation: The page index cache automatically invalidates
when file size, viewport width, or lines per page changes (e.g., font
size or orientation change).
* Performance: First open requires indexing (with progress bar),
subsequent opens load from cache instantly.
* Cover image format: PNG is detected but not supported for conversion
(no PNG decoder available). Only BMP and JPG/JPEG work.
## Summary
* **What is the goal of this PR?** (e.g., Fixes a bug in the user
authentication module,
Display the book cover image in the **"Continue Reading"** card on the
home screen, with fast navigation using framebuffer caching.
* **What changes are included?**
- Display book cover image in the "Continue Reading" card on home screen
- Load cover from cached BMP (same as sleep screen cover)
- Add framebuffer store/restore functions (`copyStoredBwBuffer`,
`freeStoredBwBuffer`) for fast navigation after initial render
- Fix `drawBitmap` scaling bug: apply scale to offset only, not to base
coordinates
- Add white text boxes behind title/author/continue reading label for
readability on cover
- Support both EPUB and XTC file cover images
- Increase HomeActivity task stack size from 2048 to 4096 for cover
image rendering
## Additional Context
* Add any other information that might be helpful for the reviewer
(e.g., performance implications, potential risks, specific areas to
focus on).
- Performance: First render loads cover from SD card (~800ms),
subsequent navigation uses cached framebuffer (~instant)
- Memory: Framebuffer cache uses ~48KB (6 chunks × 8KB) while on home
screen, freed on exit
- Fallback: If cover image is not available, falls back to standard
text-only display
- The `drawBitmap` fix corrects a bug where screenY = (y + offset) scale
was incorrectly scaling the base coordinates. Now correctly uses screenY
= y + (offset scale)
When picking a random sleep image from a set of custom images, compare
the randomly chosen index against a cached value in settings. If the
value matches, use the next image (rolling over if it's the last image).
Cache the chosen image index to settings in either case.
## Summary
Implements a tweak on the custom sleep image feature that ensures that
the user gets a new image every time the device goes to sleep.
This change adds a new setting (perhaps there's a better place to cache
this?) that stores the most recently used file index. During picking the
random image index, we compare this against the random index and choose
the next one (modulo the number of image files) if it matches, ensuring
we get a new image.
## Additional Context
As mentioned, I used settings to cache this value since it is a
persisted store, perhaps that's overkill. Open to suggestions on if
there's a better way.
## Summary
* fix: Increase home activity stack size
## Additional Context
* Home activity can crash occasionally depending on book
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? No
1. Refactor Bitmap.cpp/h to expose the options for FloydSteinberg and
brightness/gamma correction at runtime
2. Fine-tune the thresholds for Floyd Steiberg and simple quantization
to better match the display's colors
Turns out that 2 is enough to make the images render properly, so the
brightness boost and gamma adjustment doesn't seem necessary currently
(at least for my test image).
## Summary
* **What is the goal of this PR?**
Fixes the Wi-Fi connection issue when launching the Calibre Library
(OPDS browser). The previous implementation always attempted to connect
using the first saved WiFi credential, which caused connection failures
when users were in locations where only other saved networks (not the
first one) were available. Now, the activity launches a WiFi selection
screen allowing users to choose from available networks.
* **What changes are included?**
## Additional Context
**Bug Fixed**: Previously, the code used `credentials[0]` (always the
first saved WiFi), so users in areas with only their secondary/tertiary
saved networks available could never connect.
---------
Co-authored-by: danoooob <danoooob@example.com>
## Summary
* **What is the goal of this PR?**
* This PR adds a setting to (additionally) map the forward page turn
onto the powerbutton when in `EPUBReaderActivity` and powerbutton short
press is not mapped to sleep mode. I find the powerbutton to be exactly
where my thumb is while reading so it is very convenient to map the
forwardpage turn to that. Maybe Im not alone with this ^^
* **What changes are included?**
## Additional Context
* Add any other information that might be helpful for the reviewer
(e.g., performance implications, potential risks, specific areas to
focus on).
## Summary
Fixes https://github.com/daveallie/crosspoint-reader/issues/233
## Additional Context
By disabling the Text Anti-Aliasing in the settings, you can get faster
black-and-white page turns that work exactly like the stock firmware,
instead of having an additional flash after rendering (see issue linked
above for example).
Tested on the X4 and confirmed working.
---------
Co-authored-by: Dave Allie <dave@daveallie.com>
## Summary
Adds feature to file selection activity for better user navigation when
ascending folders. The activity now remembers the index of the parent
folder instead of always resetting to the first element.
I don't have any means of testing this, so if someone could test it
that'd be great
Resolves#259
## Summary
Adds support for browsing and downloading books from a Calibre-web
server via OPDS.
How it works
1. Configure server URL in Settings → Calibre Web URL (e.g.,
https://myserver.com:port I use Cloudflare tunnel to make my server
accessible anywhere fwiw)
2. "Calibre Library" will now show on the the home screen
3. Browse the catalog - navigate through categories like "By Newest",
"By Author", "By Series", etc.
4. Download books - select a book and press Confirm to download the EPUB
to your device
Navigation
- Up/Down - Move through entries
- Confirm - Open folder or download book
- Back - Go to parent catalog, or exit to home if at root
- Navigation entries show with > prefix, books show title and author
- Button hints update dynamically ("Open" for folders, "Download" for
books)
Technical details
- Fetches OPDS catalog from {server_url}/opds
- Parses both navigation feeds (catalog links) and acquisition feeds
(downloadable books)
- Maintains navigation history stack for back navigation
- Handles absolute paths in OPDS links correctly (e.g.,
/books/opds/navcatalog/...)
- Downloads EPUBs directly to the SD card root
Note
The server URL should be typed to include https:// if the server
requires it - HTTP→HTTPS redirects may cause SSL errors on ESP32.
## Additional Context
* I also changed the home titles to use uppercase for each word and
added a setting to change the size of the side margins
---------
Co-authored-by: Dave Allie <dave@daveallie.com>
Added a setting to select `fit` or `crop` for cover image on sleep
screen.
Might add a `expand` feature in the future that does not crop but rather
fills the blank space with a mirror of the image.
---------
Co-authored-by: Dave Allie <dave@daveallie.com>
## Summary
* **What is the goal of this PR?**
* This PR adds a setting to control the top left and right margins of
the reader screen in 4 sizes (5, 10, 20, 40 pt?) and defaults to `SMALL`
which is equivalent to the fixed margin of 5 that was already in use
before.
* **What changes are included?**
## Additional Context
* Add any other information that might be helpful for the reviewer
(e.g., performance implications, potential risks, specific areas to
focus on).
---------
Co-authored-by: Dave Allie <dave@daveallie.com>
## Summary
Fixes a bug in the settings menu, where previously wrap-around only
worked when scrolling upwards. Now, scrolling downwards on the last list
element wraps around to the top as expected.
Resolves#236.
## Summary
* **What is the goal of this PR?** (e.g., Fixes a bug in the user
authentication module, Implements the new feature for
file uploading.)
* **What changes are included?**
## Additional Context
* Add any other information that might be helpful for the reviewer
(e.g., performance implications, potential risks, specific areas to
focus on).
---------
Co-authored-by: ratedcounsel <hello@ratedcounsel.com>
Co-authored-by: Dave Allie <dave@daveallie.com>
## Summary
* **What is the goal of this PR?** (e.g., Fixes a bug in the user
authentication module, Implements the new feature for
file uploading.)
This PR refactors the semantic version comparison logic used during OTA
update checks.
Memory stats before :
RAM: [=== ] 30.8% (used 101068 bytes from 327680 bytes)
Flash: [========= ] 85.7% (used **5617830** bytes from 6553600 bytes)
Memory stats before :
RAM: [=== ] 30.8% (used 101068 bytes from 327680 bytes)
Flash: [========= ] 85.7% (used **5616870** bytes from 6553600 bytes)
* **What changes are included?**
Replaced std::string::substr() and std::stoi() based parsing with a
lightweight, heap-free approach.
Version parsing is now done in a single pass without creating temporary
std::string objects.
Behavior remains identical: versions are still compared as
MAJOR.MINOR.PATCH.
## Additional Context
`std::string::substr() ` creates a new string and performs heap
allocation
* Add any other information that might be helpful for the reviewer
(e.g., performance implications, potential risks, specific areas to
focus on).
## Summary
This adds the correctly styled button hints to the keyboard screen as
well as the ability to add hints to the side buttons (and up/down hints
to that screen)
## Additional Context
N/A
