setup-opds.sh: replace fixed sleep watchdog with retry loop that restarts dir2opds until books are visible inside container

health-check.sh

@@ -48,6 +48,22 @@ if [ "$IS_SPOKE" = false ] && [ "$IS_HUB" = false ]; then
     exit 1
 fi
 
+check_disk() {
+    header "Disk Space"
+    while IFS= read -r line; do
+        local pct mount
+        pct=$(echo "$line" | awk '{print $5}' | tr -d '%')
+        mount=$(echo "$line" | awk '{print $6}')
+        if [ "$pct" -ge 90 ]; then
+            fail "Disk usage at ${pct}% on $mount — critically low"
+        elif [ "$pct" -ge 80 ]; then
+            warn "Disk usage at ${pct}% on $mount — getting full"
+        else
+            ok "Disk usage at ${pct}% on $mount"
+        fi
+    done < <(df -h | awk 'NR>1' | grep -v ' /dev' | grep -v ' /sys' | grep -v ' /proc' | grep -v ' /run' | grep -v ' /snap' | grep -v 'overlay2' | grep -v 'docker')
+}
+
 check_common() {
     header "System"
 
@@ -202,6 +218,7 @@ check_hub() {
 }
 
 check_common
+check_disk
 
 if [ "$IS_SPOKE" = true ]; then
     check_spoke

hub/onboard-spoke.sh

@@ -13,15 +13,8 @@ NC='\033[0m'
 
 info()   { echo -e "${GREEN}[+]${NC} $*"; }
 warn()   { echo -e "${YELLOW}[!]${NC} $*"; }
-die() {
-  echo -e "${RED}[ERROR]${NC} $*" >&2
-  exit 1
-}
-header() {
-  echo -e "\n${CYAN}══════════════════════════════════════════${NC}"
-  echo -e "${CYAN}  $*${NC}"
-  echo -e "${CYAN}══════════════════════════════════════════${NC}"
-}
+die()    { echo -e "${RED}[ERROR]${NC} $*" >&2; exit 1; }
+header() { echo -e "\n${CYAN}══════════════════════════════════════════${NC}"; echo -e "${CYAN}  $*${NC}"; echo -e "${CYAN}══════════════════════════════════════════${NC}"; }
 
 check_deps() {
     local missing=()
@@ -162,10 +155,7 @@ if [[ "${ADD_UNION,,}" == "y" ]]; then
         1) UPSTREAM_TAG=":ro" ;;
         2) UPSTREAM_TAG=":nc" ;;
         3) UPSTREAM_TAG=":writeback" ;;
-  *)
-    warn "Invalid choice, defaulting to full read/write."
-    UPSTREAM_TAG=""
-    ;;
+        *) warn "Invalid choice, defaulting to full read/write."; UPSTREAM_TAG="" ;;
     esac
     if [ -n "$UNION_PATH" ]; then
         UPSTREAM="${SPOKE_NAME}-remote:${UNION_PATH}${UPSTREAM_TAG}"
@@ -173,8 +163,7 @@ if [[ "${ADD_UNION,,}" == "y" ]]; then
         UPSTREAM="${SPOKE_NAME}-remote:${UPSTREAM_TAG}"
     fi
     if grep -q "^\[${UNION_NAME}\]" "$RCLONE_CONF" 2>/dev/null; then
-    ALREADY=$(
-      python3 - "$RCLONE_CONF" "$UNION_NAME" "${SPOKE_NAME}-remote:" <<'PYEOF2'
+        ALREADY=$(python3 - "$RCLONE_CONF" "$UNION_NAME" "${SPOKE_NAME}-remote:" <<'PYEOF2'
 import sys
 path, section, prefix = sys.argv[1], sys.argv[2], sys.argv[3]
 with open(path) as f:
@@ -241,8 +230,7 @@ echo "${SPOKE_NAME} ${TUNNEL_PORT} ${KEY_PATH} ${MOUNT_POINT}" >>"$REGISTRY"
 info "$SPOKE_NAME registered."
 
 header "Setting Up Auto-Mount"
-#MOUNT_CMD="rclone mount ${SPOKE_NAME}-remote: ${MOUNT_POINT} --config ${HOME}/.config/rclone/rclone.conf --vfs-cache-mode writes --allow-other --daemon"
-MOUNT_CMD="sleep 55 && rclone mount ${SPOKE_NAME}-remote: ${MOUNT_POINT} --config ${HOME}/.config/rclone/rclone.conf --vfs-cache-mode full --vfs-cache-max-size 2G --vfs-read-ahead 256M --allow-other --daemon"
+MOUNT_CMD="/usr/bin/rclone mount ${SPOKE_NAME}-remote: ${MOUNT_POINT} --config ${HOME}/.config/rclone/rclone.conf --vfs-cache-mode writes --allow-other --allow-non-empty --daemon"
 CRON_ENTRY="@reboot ${MOUNT_CMD}"
 EXISTING=$(crontab -l 2>/dev/null || true)
 if echo "$EXISTING" | grep -qF "${SPOKE_NAME}-remote:"; then
@@ -252,10 +240,7 @@ else
     mkdir -p "$(dirname "$CRONTAB_BACKUP")"
     echo "$EXISTING" > "$CRONTAB_BACKUP"
     info "Crontab backed up to $CRONTAB_BACKUP"
-  {
-    echo "$EXISTING"
-    echo "$CRON_ENTRY"
-  } | crontab -
+    { echo "$EXISTING"; echo "$CRON_ENTRY"; } | crontab -
     info "Auto-mount crontab entry added for ${SPOKE_NAME}."
 fi
 info "Starting mount now..."

hub/setup-opds.sh

@@ -0,0 +1,363 @@
+#!/usr/bin/env bash
+set -euo pipefail
+
+RED='\033[0;31m'
+GREEN='\033[0;32m'
+YELLOW='\033[1;33m'
+CYAN='\033[0;36m'
+NC='\033[0m'
+
+info()   { echo -e "${GREEN}[+]${NC} $*"; }
+warn()   { echo -e "${YELLOW}[!]${NC} $*"; }
+die()    { echo -e "${RED}[ERROR]${NC} $*" >&2; exit 1; }
+header() { echo -e "\n${CYAN}══════════════════════════════════════════${NC}"; echo -e "${CYAN}  $*${NC}"; echo -e "${CYAN}══════════════════════════════════════════${NC}"; }
+
+[ "$(id -u)" -eq 0 ] || die "Run as root"
+
+if ! command -v docker >/dev/null 2>&1; then
+    warn "Docker is not installed."
+    read -rp "Install Docker now? [Y/n]: " INSTALL_DOCKER
+    INSTALL_DOCKER="${INSTALL_DOCKER:-y}"
+    if [[ "${INSTALL_DOCKER,,}" == "y" ]]; then
+        header "Installing Docker"
+        if command -v apt-get >/dev/null 2>&1; then
+            apt-get update -q
+            apt-get install -y -q docker.io docker-cli docker-compose
+        else
+            curl -fsSL https://get.docker.com | bash
+        fi
+        command -v docker >/dev/null 2>&1 || die "Docker installation failed."
+        info "Docker installed."
+    else
+        die "Docker is required. Aborting."
+    fi
+fi
+
+header "TinyBoard OPDS Setup"
+echo ""
+
+EXISTING_SERVER=""
+if docker ps -a --format '{{.Names}}' 2>/dev/null | grep -qE '^(dir2opds|stump)$'; then
+    EXISTING_SERVER=$(docker ps -a --format '{{.Names}}' 2>/dev/null | grep -E '^(dir2opds|stump)$' | head -1)
+fi
+
+if [ -n "$EXISTING_SERVER" ]; then
+    echo "An existing OPDS server was found: ${EXISTING_SERVER}"
+    echo ""
+    echo "  1) Reconfigure — update books path, domain, SSL, or auth"
+    echo "  2) Fresh install — remove existing and start over"
+    echo "  q) Quit"
+    echo ""
+    read -rp "Choose [1/2/q]: " RECONF_CHOICE
+    case "$RECONF_CHOICE" in
+        1) info "Reconfiguring existing setup..." ;;
+        2) 
+            docker rm -f dir2opds stump caddy-opds 2>/dev/null || true
+            info "Existing containers removed."
+            ;;
+        q|Q) exit 0 ;;
+        *) die "Invalid choice." ;;
+    esac
+    echo ""
+fi
+
+echo "Choose an OPDS server:"
+echo "  1) dir2opds — lightweight, no database, serves files directly from a folder"
+echo "  2) Stump    — full-featured book/comic server with web UI and OPDS support"
+echo ""
+read -rp "Choose [1/2]: " OPDS_CHOICE
+
+case "$OPDS_CHOICE" in
+1)
+    OPDS_SERVER="dir2opds"
+    OPDS_IMAGE="ghcr.io/dubyte/dir2opds:latest"
+    OPDS_INTERNAL_PORT="8080"
+    ;;
+2)
+    OPDS_SERVER="stump"
+    OPDS_IMAGE="aaronleopold/stump"
+    OPDS_INTERNAL_PORT="10801"
+    ;;
+*)
+    die "Invalid choice."
+    ;;
+esac
+
+info "Selected: $OPDS_SERVER"
+echo ""
+
+read -rp "OPDS domain (e.g. opds.yourdomain.com): " OPDS_DOMAIN
+[ -n "$OPDS_DOMAIN" ] || die "Domain cannot be empty"
+
+read -rp "Hub user [armbian]: " HUB_USER
+HUB_USER="${HUB_USER:-armbian}"
+HUB_HOME="/home/$HUB_USER"
+
+MOUNT_BASE="${HUB_HOME}/mnt"
+AVAILABLE_MOUNTS=()
+if [ -d "$MOUNT_BASE" ]; then
+    while IFS= read -r mountdir; do
+        AVAILABLE_MOUNTS+=("$mountdir")
+    done < <(find "$MOUNT_BASE" -mindepth 1 -maxdepth 1 -type d | sort)
+fi
+
+if [ ${#AVAILABLE_MOUNTS[@]} -gt 0 ]; then
+    echo "Available spoke mounts:"
+    for i in "${!AVAILABLE_MOUNTS[@]}"; do
+        echo "  $i) ${AVAILABLE_MOUNTS[$i]}"
+    done
+    echo "  m) Enter path manually"
+    echo ""
+    read -rp "Choose a mount [0]: " MOUNT_CHOICE
+    MOUNT_CHOICE="${MOUNT_CHOICE:-0}"
+    if [[ "$MOUNT_CHOICE" == "m" ]]; then
+        read -rp "Path to books directory: " BOOKS_PATH
+    elif [[ "$MOUNT_CHOICE" =~ ^[0-9]+$ ]] && [ "$MOUNT_CHOICE" -lt "${#AVAILABLE_MOUNTS[@]}" ]; then
+        BASE="${AVAILABLE_MOUNTS[$MOUNT_CHOICE]}"
+        read -rp "Subdirectory within ${BASE} (leave blank for root): " SUBDIR
+        if [ -n "$SUBDIR" ]; then
+            BOOKS_PATH="${BASE}/${SUBDIR}"
+        else
+            BOOKS_PATH="$BASE"
+        fi
+    else
+        die "Invalid choice."
+    fi
+else
+    warn "No spoke mounts found in ${MOUNT_BASE}."
+    read -rp "Path to books directory: " BOOKS_PATH
+fi
+
+[ -n "$BOOKS_PATH" ] || die "Books path cannot be empty."
+[ -d "$BOOKS_PATH" ] || die "Books directory not found: $BOOKS_PATH"
+
+echo ""
+echo "SSL certificate management:"
+echo "  1) Automatic — Caddy obtains and renews certs from Let's Encrypt (recommended)"
+echo "  2) Manual    — provide paths to existing certificate files"
+echo ""
+read -rp "Choose [1/2]: " SSL_CHOICE
+
+AUTO_HTTPS=true
+CERT_PATH=""
+KEY_PATH=""
+
+case "$SSL_CHOICE" in
+1)
+    AUTO_HTTPS=true
+    info "Automatic HTTPS selected — DNS must point ${OPDS_DOMAIN} to this server."
+    ;;
+2)
+    AUTO_HTTPS=false
+    read -rp "Path to fullchain.pem: " CERT_PATH
+    [ -f "$CERT_PATH" ] || die "Certificate file not found: $CERT_PATH"
+    read -rp "Path to privkey.pem: " KEY_PATH
+    [ -f "$KEY_PATH" ] || die "Key file not found: $KEY_PATH"
+    ;;
+*)
+    die "Invalid choice."
+    ;;
+esac
+
+echo ""
+read -rp "Protect with a password? [y/N]: " USE_AUTH
+USE_AUTH="${USE_AUTH:-n}"
+OPDS_USER=""
+OPDS_PASS=""
+HASHED_PASS=""
+if [[ "${USE_AUTH,,}" == "y" ]]; then
+    read -rp "Username [opds]: " OPDS_USER
+    OPDS_USER="${OPDS_USER:-opds}"
+    read -rsp "Password: " OPDS_PASS
+    echo ""
+    [ -n "$OPDS_PASS" ] || die "Password cannot be empty"
+fi
+
+OPDS_DIR="${HUB_HOME}/opds"
+mkdir -p "$OPDS_DIR"
+chown "$HUB_USER":"$HUB_USER" "$OPDS_DIR"
+
+header "Creating Docker Network"
+docker network create opds-net 2>/dev/null || info "Network opds-net already exists."
+
+header "Starting $OPDS_SERVER"
+docker rm -f "$OPDS_SERVER" 2>/dev/null || true
+
+case "$OPDS_SERVER" in
+dir2opds)
+    docker run -d \
+        --name dir2opds \
+        --restart unless-stopped \
+        --network opds-net \
+        --mount "type=bind,source=${BOOKS_PATH},target=/books,readonly,bind-propagation=shared" \
+        "$OPDS_IMAGE" \
+        /dir2opds -dir /books -hide-dot-files -calibre
+    ;;
+stump)
+    mkdir -p "${OPDS_DIR}/stump-config"
+    chown -R "$HUB_USER":"$HUB_USER" "${OPDS_DIR}"
+    docker run -d \
+        --name stump \
+        --restart unless-stopped \
+        --network opds-net \
+        -v "${BOOKS_PATH}:/books:ro" \
+        -v "${OPDS_DIR}/stump-config:/config" \
+        -e PUID=1000 \
+        -e PGID=1000 \
+        "$OPDS_IMAGE"
+    ;;
+esac
+
+info "$OPDS_SERVER started on internal network opds-net."
+
+header "Writing Caddyfile"
+CADDY_DIR="${OPDS_DIR}/caddy"
+mkdir -p "${CADDY_DIR}/data" "${CADDY_DIR}/config"
+
+if [ "$AUTO_HTTPS" = false ]; then
+    TLS_BLOCK="    tls ${CERT_PATH} ${KEY_PATH}"
+else
+    TLS_BLOCK=""
+fi
+
+if [[ "${USE_AUTH,,}" == "y" ]]; then
+    docker run --rm caddy:alpine caddy hash-password --plaintext "$OPDS_PASS" > /tmp/opds_hash.txt 2>/dev/null
+    HASHED_PASS=$(cat /tmp/opds_hash.txt)
+    rm -f /tmp/opds_hash.txt
+    AUTH_BLOCK="    basicauth {
+        ${OPDS_USER} ${HASHED_PASS}
+    }"
+else
+    AUTH_BLOCK=""
+fi
+
+if [ "$AUTO_HTTPS" = false ]; then
+    cat > "${CADDY_DIR}/Caddyfile" << EOF
+{
+    auto_https off
+}
+
+:80 {
+    redir https://{host}{uri} permanent
+}
+
+${OPDS_DOMAIN} {
+    encode gzip
+${TLS_BLOCK}
+${AUTH_BLOCK}
+    reverse_proxy http://${OPDS_SERVER}:${OPDS_INTERNAL_PORT} {
+        header_up Host {host}
+        header_up X-Real-IP {remote}
+    }
+}
+EOF
+else
+    cat > "${CADDY_DIR}/Caddyfile" << EOF
+${OPDS_DOMAIN} {
+    encode gzip
+${AUTH_BLOCK}
+    reverse_proxy http://${OPDS_SERVER}:${OPDS_INTERNAL_PORT} {
+        header_up Host {host}
+        header_up X-Real-IP {remote}
+    }
+}
+EOF
+fi
+
+info "Caddyfile written to ${CADDY_DIR}/Caddyfile"
+
+header "Firewall Check"
+warn "Caddy requires ports 80 and 443 to be open on this server."
+warn "If using a cloud firewall (e.g. Linode), ensure inbound TCP rules allow:"
+warn "  Port 80  — required for Let's Encrypt HTTP challenge and HTTP→HTTPS redirect"
+warn "  Port 443 — required for HTTPS"
+echo ""
+read -rp "Press ENTER to continue once ports are open..."
+
+header "Starting Caddy"
+docker rm -f caddy-opds 2>/dev/null || true
+
+if [ "$AUTO_HTTPS" = true ]; then
+    docker run -d \
+        --name caddy-opds \
+        --restart unless-stopped \
+        --network opds-net \
+        -p 80:80 \
+        -p 443:443 \
+        -v "${CADDY_DIR}/Caddyfile:/etc/caddy/Caddyfile:ro" \
+        -v "${CADDY_DIR}/data:/data" \
+        -v "${CADDY_DIR}/config:/config" \
+        caddy:alpine
+else
+    CERT_DIR=$(dirname "$CERT_PATH")
+    docker run -d \
+        --name caddy-opds \
+        --restart unless-stopped \
+        --network opds-net \
+        -p 80:80 \
+        -p 443:443 \
+        -v "${CADDY_DIR}/Caddyfile:/etc/caddy/Caddyfile:ro" \
+        -v "${CADDY_DIR}/data:/data" \
+        -v "${CADDY_DIR}/config:/config" \
+        -v "${CERT_DIR}:/certs:ro" \
+        caddy:alpine
+fi
+
+sleep 3
+docker logs caddy-opds --tail 5 2>/dev/null || true
+
+header "Setting Up Mount Watchdog"
+
+WATCHDOG_SCRIPT="/usr/local/bin/opds-watchdog.sh"
+cat > "$WATCHDOG_SCRIPT" << EOF
+#!/usr/bin/env bash
+SERVER_NAME="${OPDS_SERVER}"
+MAX_WAIT=300
+ELAPSED=0
+while [ \$ELAPSED -lt \$MAX_WAIT ]; do
+    COUNT=\$(docker exec "\$SERVER_NAME" ls /books 2>/dev/null | wc -l)
+    if [ "\$COUNT" -gt 0 ]; then
+        exit 0
+    fi
+    docker restart "\$SERVER_NAME" 2>/dev/null || true
+    sleep 15
+    ELAPSED=\$((ELAPSED + 15))
+done
+EOF
+chmod +x "$WATCHDOG_SCRIPT"
+
+MOUNT_SCRIPT="/home/${HUB_USER}/mount-$(basename ${MOUNT_POINT:-grace}).sh"
+cat > "$MOUNT_SCRIPT" << EOF
+#!/usr/bin/env bash
+sleep 90
+/usr/bin/rclone mount ${OPDS_SERVER}-remote: ${MOUNT_POINT:-/home/${HUB_USER}/mnt/grace} --config /home/${HUB_USER}/.config/rclone/rclone.conf --vfs-cache-mode writes --allow-other --allow-non-empty --daemon
+EOF
+chmod +x "$MOUNT_SCRIPT"
+chown "$HUB_USER":"$HUB_USER" "$MOUNT_SCRIPT"
+
+CRON_LINE="@reboot $WATCHDOG_SCRIPT"
+EXISTING_ROOT_CRON=$(crontab -l 2>/dev/null || true)
+if ! echo "$EXISTING_ROOT_CRON" | grep -qF "opds-watchdog"; then
+    { echo "$EXISTING_ROOT_CRON"; echo "$CRON_LINE"; } | crontab -
+    info "Watchdog crontab entry added — restarts $OPDS_SERVER until books are visible."
+else
+    crontab -l 2>/dev/null | grep -v "opds-watchdog" | { cat; echo "$CRON_LINE"; } | crontab -
+    info "Watchdog crontab entry updated."
+fi
+
+header "OPDS Setup Complete"
+echo ""
+echo -e "  OPDS URL:     ${GREEN}https://${OPDS_DOMAIN}${NC}"
+if [[ "${USE_AUTH,,}" == "y" ]]; then
+    echo -e "  Username:     ${GREEN}${OPDS_USER}${NC}"
+    echo -e "  Password:     ${GREEN}(as entered)${NC}"
+else
+    echo -e "  Auth:         ${YELLOW}None — publicly accessible${NC}"
+fi
+if [ "$AUTO_HTTPS" = true ]; then
+    echo -e "  SSL:          ${GREEN}Automatic (Let's Encrypt)${NC}"
+    warn "DNS must point ${OPDS_DOMAIN} to this server's IP for HTTPS to work."
+else
+    echo -e "  SSL:          ${GREEN}Manual certificates${NC}"
+fi
+echo ""

syncthing.sh

@@ -84,6 +84,145 @@ for device_id, info in devices.items():
     fi
 }
 
+show_ignored_folders() {
+    local config
+    config=$(st_get /rest/config)
+    local ignored
+    ignored=$(echo "$config" | python3 -c '
+import sys,json
+d=json.load(sys.stdin)
+folders = d.get("ignoredFolders", [])
+for f in folders:
+    print(f.get("id","?") + " — " + f.get("label","(no label)"))
+' 2>/dev/null || true)
+    if [ -z "$ignored" ]; then
+        info "No ignored folders."
+        return
+    fi
+    echo ""
+    warn "Ignored folders (click Ignore in WUI causes this):"
+    echo "$ignored" | sed 's/^/  /'
+    echo ""
+    read -rp "Un-ignore a folder? [y/N]: " UNIGNORE
+    UNIGNORE="${UNIGNORE:-n}"
+    if [[ "${UNIGNORE,,}" != "y" ]]; then return; fi
+
+    local folder_ids
+    folder_ids=$(echo "$config" | python3 -c '
+import sys,json
+d=json.load(sys.stdin)
+for f in d.get("ignoredFolders",[]):
+    print(f.get("id",""))
+' 2>/dev/null || true)
+
+    echo "Ignored folder IDs:"
+    local i=1
+    while IFS= read -r fid; do
+        echo "  $i) $fid"
+        i=$((i+1))
+    done <<< "$folder_ids"
+    read -rp "Choose folder number to un-ignore: " CHOICE
+    local TARGET_ID
+    TARGET_ID=$(echo "$folder_ids" | sed -n "${CHOICE}p")
+    [ -n "$TARGET_ID" ] || { warn "Invalid choice."; return; }
+
+    local new_config
+    new_config=$(echo "$config" | python3 -c "
+import sys,json
+d=json.load(sys.stdin)
+d['ignoredFolders'] = [f for f in d.get('ignoredFolders',[]) if f.get('id') != sys.argv[1]]
+print(json.dumps(d))
+" "$TARGET_ID")
+    st_put /rest/config "$new_config"
+    info "Folder $TARGET_ID removed from ignored list. It should now appear as pending."
+}
+
+show_pending_folders() {
+    header "Pending Folders"
+    local pending
+    pending=$(st_get /rest/cluster/pending/folders)
+    local count
+    count=$(echo "$pending" | python3 -c 'import sys,json; d=json.load(sys.stdin); print(len(d))')
+    if [ "$count" -eq 0 ]; then
+        warn "No pending folders."
+        echo ""
+        read -rp "Check ignored folders? [y/N]: " CHECK_IGNORED
+        if [[ "${CHECK_IGNORED,,}" == "y" ]]; then
+            show_ignored_folders
+        fi
+        return
+    fi
+    echo "$pending" | python3 -c '
+import sys,json
+d=json.load(sys.stdin)
+for fid,info in d.items():
+    label = info.get("label", "") or info.get("offeredBy", {})
+    label = list(info.get("offeredBy",{}).values())[0].get("receiveEncrypted","") if info.get("offeredBy") else ""
+    offered_by = list(info.get("offeredBy",{}).keys())
+    folder_label = ""
+    for dev_info in info.get("offeredBy",{}).values():
+        if dev_info.get("folderLabel"):
+            folder_label = dev_info["folderLabel"]
+            break
+    if folder_label:
+        print(f"  Folder Name: {folder_label}")
+    print(f"  Folder ID: {fid}")
+    print(f"  Offered by: {offered_by}")
+    print("")
+'
+    read -rp "Accept a pending folder? [y/N/R (retry/check ignored)]: " ACCEPT
+    ACCEPT="${ACCEPT:-n}"
+    if [[ "${ACCEPT,,}" == "r" ]]; then
+        show_ignored_folders
+        return
+    fi
+    if [[ "${ACCEPT,,}" != "y" ]]; then return; fi
+
+    local folder_ids folder_labels
+    folder_ids=$(echo "$pending" | python3 -c 'import sys,json; [print(k) for k in json.load(sys.stdin)]')
+    folder_labels=$(echo "$pending" | python3 -c '
+import sys,json
+d=json.load(sys.stdin)
+for fid,info in d.items():
+    label=""
+    for dev_info in info.get("offeredBy",{}).values():
+        if dev_info.get("folderLabel"):
+            label=dev_info["folderLabel"]
+            break
+    print(label if label else fid)
+')
+    local FOLDER_ID
+    if [ "$(echo "$folder_ids" | wc -l)" -eq 1 ]; then
+        FOLDER_ID="$folder_ids"
+    else
+        echo "Available pending folders:"
+        local i=1
+        while IFS= read -r fid && IFS= read -r flabel <&3; do
+            echo "  $i) $flabel ($fid)"
+            i=$((i+1))
+        done <<< "$folder_ids" 3<<< "$folder_labels"
+        read -rp "Choose folder number: " FOLDER_NUM
+        FOLDER_ID=$(echo "$folder_ids" | sed -n "${FOLDER_NUM}p")
+    fi
+    [ -n "$FOLDER_ID" ] || { warn "No folder selected."; return; }
+
+    echo ""
+    info "Available directories in /var/syncthing/data/:"
+    ls /var/syncthing/data/ 2>/dev/null | sed 's/^/  /' || true
+    echo ""
+    read -rp "Folder path on this device: " FOLDER_PATH
+    [ -n "$FOLDER_PATH" ] || { warn "Path cannot be empty."; return; }
+
+    read -rp "Folder label [$FOLDER_ID]: " FOLDER_LABEL
+    FOLDER_LABEL="${FOLDER_LABEL:-$FOLDER_ID}"
+
+    st_post /rest/config/folders "$(python3 -c "
+import json
+print(json.dumps({'id': '$FOLDER_ID', 'label': '$FOLDER_LABEL', 'path': '$FOLDER_PATH'}))
+")"
+    info "Folder '$FOLDER_LABEL' added at $FOLDER_PATH."
+}
+
 add_device_by_pending() {
     local pending="$1"
     local ids
@@ -436,7 +575,7 @@ get_apikey
 while true; do
     header "Syncthing Manager"
     echo "  0) Show This Device's ID"
-    echo "  1) Pending Devices"
+    echo "  1) Pending Devices & Folders"
     echo "  2) List Devices"
     echo "  3) Add Device"
     echo "  4) Remove Device"
@@ -451,7 +590,7 @@ while true; do
     echo ""
     case "$OPT" in
         0) show_own_device_id ;;
-        1) show_pending_devices ;;
+        1) show_pending_devices; show_pending_folders ;;
         2) list_devices ;;
         3) add_device ;;
         4) remove_device ;;