tinyboard/hub/setup-hub.sh

#!/usr/bin/env bash
set -euo pipefail

RED='\033[0;31m'
GREEN='\033[0;32m'
YELLOW='\033[1;33m'
CYAN='\033[0;36m'
NC='\033[0m'

info()   { echo -e "${GREEN}[+]${NC} $*"; }
warn()   { echo -e "${YELLOW}[!]${NC} $*"; }
die()    { echo -e "${RED}[ERROR]${NC} $*" >&2; exit 1; }
header() { echo -e "\n${CYAN}══════════════════════════════════════════${NC}"; echo -e "${CYAN}  $*${NC}"; echo -e "${CYAN}══════════════════════════════════════════${NC}"; }

[ "$(id -u)" -eq 0 ] || die "Run as root"

header "TinyBoard Hub Setup"

header "Detecting Package Manager"
if command -v apt-get >/dev/null 2>&1; then
    PKG_MANAGER="apt"
    PKG_INSTALL="apt-get install -y -q"
    OPENSSH_PKG="openssh-server"
    FUSE_PKG="fuse"
    info "Detected: apt (Debian/Ubuntu)"
    apt-get update -q
elif command -v dnf >/dev/null 2>&1; then
    PKG_MANAGER="dnf"
    PKG_INSTALL="dnf install -y -q"
    OPENSSH_PKG="openssh-server"
    FUSE_PKG="fuse"
    info "Detected: dnf (Fedora/RHEL/Alma/Rocky)"
    dnf check-update -q || true
elif command -v yum >/dev/null 2>&1; then
    PKG_MANAGER="yum"
    PKG_INSTALL="yum install -y -q"
    OPENSSH_PKG="openssh-server"
    FUSE_PKG="fuse"
    info "Detected: yum (older RHEL/CentOS)"
    yum check-update -q || true
elif command -v pacman >/dev/null 2>&1; then
    PKG_MANAGER="pacman"
    PKG_INSTALL="pacman -S --noconfirm --quiet"
    OPENSSH_PKG="openssh"
    FUSE_PKG="fuse3"
    info "Detected: pacman (Arch)"
    pacman -Sy --quiet
else
    die "No supported package manager found (apt, dnf, yum, pacman)"
fi

header "Installing Packages"
info "Installing curl if missing..."
if ! command -v curl >/dev/null 2>&1; then
    $PKG_INSTALL curl
fi

$PKG_INSTALL "$OPENSSH_PKG" "$FUSE_PKG" git

if ! command -v rclone >/dev/null 2>&1; then
    info "Installing rclone..."
    if [ "$PKG_MANAGER" = "pacman" ]; then
        $PKG_INSTALL rclone
    else
        curl -fsSL https://rclone.org/install.sh | bash
    fi
else
    warn "rclone already installed, skipping."
fi

header "Armbian User Setup"
if id armbian >/dev/null 2>&1; then
    warn "User 'armbian' already exists, skipping creation."
else
    info "Creating armbian user..."
    groupadd -g 1000 armbian 2>/dev/null || true
    useradd -m -u 1000 -g 1000 -s /bin/bash armbian

    ADDED_TO_GROUP=false
    if getent group sudo >/dev/null 2>&1; then
        if usermod -aG sudo armbian 2>/dev/null; then
            ADDED_TO_GROUP=true
        fi
    fi
    if [ "$ADDED_TO_GROUP" = false ] && getent group wheel >/dev/null 2>&1; then
        if usermod -aG wheel armbian 2>/dev/null; then
            ADDED_TO_GROUP=true
        fi
    fi
    if [ "$ADDED_TO_GROUP" = false ]; then
        warn "Neither sudo nor wheel group found — armbian user has no sudo access."
    fi

    info "armbian user created."
    echo ""
    warn "Set a password for the armbian user:"
    passwd armbian
fi

ARMBIAN_HOME="/home/armbian"
SSH_DIR="$ARMBIAN_HOME/.ssh"
mkdir -p "$SSH_DIR"
touch "$SSH_DIR/authorized_keys"
chown -R armbian:armbian "$SSH_DIR"
chmod 700 "$SSH_DIR"
chmod 600 "$SSH_DIR/authorized_keys"

header "SSH Server Configuration"
SSHD_CONF="/etc/ssh/sshd_config"
[ -f "$SSHD_CONF" ] || die "sshd_config not found at $SSHD_CONF"

for DIRECTIVE in "GatewayPorts yes" "AllowTcpForwarding yes"; do
    KEY="${DIRECTIVE%% *}"
    if grep -q "^$KEY" "$SSHD_CONF"; then
        sed -i "s/^$KEY.*/$DIRECTIVE/" "$SSHD_CONF"
    else
        echo "$DIRECTIVE" >> "$SSHD_CONF"
    fi
    info "$DIRECTIVE set."
done

if systemctl enable ssh 2>/dev/null; then
    systemctl restart ssh
elif systemctl enable sshd 2>/dev/null; then
    systemctl restart sshd
else
    warn "Could not enable/restart SSH service — please start it manually."
fi
info "SSH server restarted."

header "FUSE Configuration"
FUSE_CONF="/etc/fuse.conf"
if [ -f "$FUSE_CONF" ]; then
    if grep -q "^#user_allow_other" "$FUSE_CONF"; then
        sed -i 's/^#user_allow_other/user_allow_other/' "$FUSE_CONF"
        info "user_allow_other enabled in $FUSE_CONF."
    elif grep -q "^user_allow_other" "$FUSE_CONF"; then
        warn "user_allow_other already enabled."
    else
        echo "user_allow_other" >> "$FUSE_CONF"
        info "user_allow_other added to $FUSE_CONF."
    fi
else
    echo "user_allow_other" > "$FUSE_CONF"
    info "$FUSE_CONF created with user_allow_other."
fi

groupadd fuse 2>/dev/null || true
usermod -aG fuse armbian 2>/dev/null || true
info "armbian added to fuse group."

header "Rclone Setup"
RCLONE_CONF="$ARMBIAN_HOME/.config/rclone/rclone.conf"
mkdir -p "$(dirname "$RCLONE_CONF")"
chown -R armbian:armbian "$ARMBIAN_HOME/.config"

if [ ! -f "$RCLONE_CONF" ]; then
    touch "$RCLONE_CONF"
    chown armbian:armbian "$RCLONE_CONF"
    info "Empty rclone.conf created at $RCLONE_CONF."
else
    warn "rclone.conf already exists, skipping."
fi

header "Mount Point Setup"
read -rp "Mount point for spoke filesystems [/mnt/hub]: " MOUNT_POINT
MOUNT_POINT="${MOUNT_POINT:-/mnt/hub}"
mkdir -p "$MOUNT_POINT"
chown armbian:armbian "$MOUNT_POINT"
info "Mount point created at $MOUNT_POINT."

header "Crontab Setup"
SCRIPT_DIR="$(cd "$(dirname "${BASH_SOURCE[0]}")" && pwd)"
HELPER="$SCRIPT_DIR/../hubspoke-helper.sh"
CRON_LINE="@reboot $HELPER hub start-background"
EXISTING=$(crontab -u armbian -l 2>/dev/null || true)

if echo "$EXISTING" | grep -qF "hub start-background"; then
    warn "Crontab entry already exists, skipping."
else
    (echo "$EXISTING"; echo "$CRON_LINE") | crontab -u armbian -
    info "Added @reboot crontab entry for rclone mount."
fi

header "Hub Setup Complete"
echo -e "  Armbian user:  ${GREEN}armbian${NC}"
echo -e "  SSH config:    ${GREEN}GatewayPorts yes, AllowTcpForwarding yes${NC}"
echo -e "  FUSE:          ${GREEN}user_allow_other enabled${NC}"
echo -e "  rclone config: ${GREEN}$RCLONE_CONF${NC}"
echo -e "  Mount point:   ${GREEN}$MOUNT_POINT${NC}"
echo ""
echo -e "${YELLOW}Next steps:${NC}"
echo "  For each spoke that connects, run:"
echo "    ./setup.sh  (choose option 2)"
echo ""