Recommend starship.rs for prompt

Update boot.sh ANSI

ansi.sh

@@ -1,14 +0,0 @@
-#!/bin/bash
-
-ansi_art=' ▄██████▄    ▄▄▄▄███▄▄▄▄      ▄████████    ▄████████  ▄████████    ▄█    █▄    ▄██   ▄  
-███    ███ ▄██▀▀▀███▀▀▀██▄   ███    ███   ███    ███ ███    ███   ███    ███   ███   ██▄
-███    ███ ███   ███   ███   ███    ███   ███    ███ ███    █▀    ███    ███   ███▄▄▄███
-███    ███ ███   ███   ███   ███    ███  ▄███▄▄▄▄██▀ ███         ▄███▄▄▄▄███▄▄ ▀▀▀▀▀▀███
-███    ███ ███   ███   ███ ▀███████████ ▀▀███▀▀▀▀▀   ███        ▀▀███▀▀▀▀███▀  ▄██   ███
-███    ███ ███   ███   ███   ███    ███ ▀███████████ ███    █▄    ███    ███   ███   ███
-███    ███ ███   ███   ███   ███    ███   ███    ███ ███    ███   ███    ███   ███   ███
- ▀██████▀   ▀█   ███   █▀    ███    █▀    ███    ███ ████████▀    ███    █▀     ▀█████▀ 
-                                          ███    ███                                    '
-
-clear
-echo -e "\n$ansi_art\n"

bin/omarchy

@@ -4,8 +4,9 @@ OMARCHY_VERSION=$(git -C ~/.local/share/omarchy describe --tags --abbrev=0 2>/de
 PATH="$PATH:$HOME/.local/share/omarchy/bin"
 
 show_ascii_art() {
-  source ~/.local/share/omarchy/ansi.sh
+  clear
-  echo "                                                                                 $OMARCHY_VERSION"
+  tte -i ~/.local/share/omarchy/logo.txt --frame-rate 640 --no-color expand
+  echo "                                                                          $OMARCHY_VERSION"
 }
 
 main_menu() {
@@ -95,9 +96,10 @@ remove_theme_prompt() {
 
 setup_menu() {
   show_ascii_art
-  local menu=("Dropbox" "Docker DBs" "Fingerprint sensor" "Fido2 device" "Back")
+  local menu=("Dropbox" "Steam" "Docker DBs" "Fingerprint sensor" "Fido2 device" "Back")
   local commands=(
     "omarchy-setup-dropbox"
+    "omarchy-setup-steam"
     "setup_docker_dbs"
     "omarchy-setup-fingerprint"
     "omarchy-setup-fido2"
@@ -126,10 +128,10 @@ setup_docker_dbs() {
   if [[ -n "$choices" ]]; then
     for db in $choices; do
       case $db in
-      MariaDB) sudo docker run -d --restart unless-stopped -p "127.0.0.1:3306:3306" --name=mariadb11 -e MARIADB_ROOT_PASSWORD= -e MARIADB_ALLOW_EMPTY_ROOT_PASSWORD=true mariadb:11.8 ;;
       MySQL) sudo docker run -d --restart unless-stopped -p "127.0.0.1:3306:3306" --name=mysql8 -e MYSQL_ROOT_PASSWORD= -e MYSQL_ALLOW_EMPTY_PASSWORD=true mysql:8.4 ;;
-      Redis) sudo docker run -d --restart unless-stopped -p "127.0.0.1:6379:6379" --name=redis redis:7 ;;
       PostgreSQL) sudo docker run -d --restart unless-stopped -p "127.0.0.1:5432:5432" --name=postgres16 -e POSTGRES_HOST_AUTH_METHOD=trust postgres:16 ;;
+      MariaDB) sudo docker run -d --restart unless-stopped -p "127.0.0.1:3306:3306" --name=mariadb11 -e MARIADB_ROOT_PASSWORD= -e MARIADB_ALLOW_EMPTY_ROOT_PASSWORD=true mariadb:11.8 ;;
+      Redis) sudo docker run -d --restart unless-stopped -p "127.0.0.1:6379:6379" --name=redis redis:7 ;;
       esac
     done
   fi

bin/omarchy-cmd-screenrecord

@@ -2,8 +2,16 @@
 
 # Set recorder based on GPU
 
+[[ -f ~/.config/user-dirs.dirs ]] && source ~/.config/user-dirs.dirs
+OUTPUT_DIR="${OMARCHY_SCREENRECORD_DIR:-${XDG_VIDEOS_DIR:-$HOME/Videos}}"
+
+if [[ ! -d "$OUTPUT_DIR" ]]; then
+  notify-send "Screen recording directory does not exist: $OUTPUT_DIR" -u critical -t 3000
+  exit 1
+fi
+
 screenrecording() {
-  filename="$HOME/Videos/screenrecording-$(date +'%Y-%m-%d_%H-%M-%S').mp4"
+  filename="$OUTPUT_DIR/screenrecording-$(date +'%Y-%m-%d_%H-%M-%S').mp4"
   notify-send "Screen recording starting..." -t 1000
   sleep 1
 
@@ -17,7 +25,7 @@ screenrecording() {
 if pgrep -x wl-screenrec >/dev/null || pgrep -x wf-recorder >/dev/null; then
   pkill -x wl-screenrec
   pkill -x wf-recorder
-  notify-send "Screen recording saved to ~/Videos" -t 2000
+  notify-send "Screen recording saved to $OUTPUT_DIR" -t 2000
 elif [[ "$1" == "output" ]]; then
   screenrecording
 else

bin/omarchy-cmd-screensaver

@@ -0,0 +1,10 @@
+#!/bin/bash
+
+trap "exit" SIGINT
+
+while true; do
+  effect=$(tte 2>&1 | grep -oP '{\K[^}]+' | tr ',' ' ' | tr ' ' '\n' | sed -n '/^beams$/,$p' | sort -u | shuf -n1)
+  tte -i ~/.local/share/omarchy/logo.txt \
+    --frame-rate 240 --canvas-width 0 --canvas-height 0 --anchor-canvas c --anchor-text c \
+    "$effect"
+done

bin/omarchy-cmd-screenshot

@@ -1,8 +1,16 @@
 #!/bin/bash
 
-hyprshot -m ${1:-region} --raw |
+[[ -f ~/.config/user-dirs.dirs ]] && source ~/.config/user-dirs.dirs
+OUTPUT_DIR="${OMARCHY_SCREENSHOT_DIR:-${XDG_PICTURES_DIR:-$HOME/Pictures}}"
+
+if [[ ! -d "$OUTPUT_DIR" ]]; then
+  notify-send "Screenshot directory does not exist: $OUTPUT_DIR" -u critical -t 3000
+  exit 1
+fi
+
+pkill slurp || hyprshot -m ${1:-region} --raw |
   satty --filename - \
-    --output-filename ~/Pictures/screenshot-$(date +'%Y-%m-%d_%H-%M-%S').png \
+    --output-filename "$OUTPUT_DIR/screenshot-$(date +'%Y-%m-%d_%H-%M-%S').png" \
     --early-exit \
     --actions-on-enter save-to-clipboard \
     --save-after-copy \

bin/omarchy-cmd-tzupdate

@@ -0,0 +1,5 @@
+#!/bin/bash
+
+sudo tzupdate
+new_timezone=$(timedatectl show -p Timezone --value)
+notify-send "Timezone has been set to $new_timezone"

bin/omarchy-launch-screensaver

@@ -0,0 +1,5 @@
+#!/bin/bash
+
+pkill -f "alacritty --class Screensaver" ||
+  alacritty --class Screensaver --title Screensaver -o 'colors.primary.background="#000000"' \
+    -e ~/.local/share/omarchy/bin/omarchy-cmd-screensaver

bin/omarchy-refresh-applications

@@ -10,7 +10,8 @@ mkdir -p ~/.local/share/applications
 cp ~/.local/share/omarchy/applications/*.desktop ~/.local/share/applications/
 cp ~/.local/share/omarchy/applications/hidden/*.desktop ~/.local/share/applications/
 
-if [ -z "$OMARCHY_BARE" ]; then
+# Only copy xtras if user is not in bare mode
+if [[ ! -f ~/.local/state/omarchy/bare.mode ]] && [ -z "$OMARCHY_BARE" ]; then
   cp ~/.local/share/omarchy/applications/xtras/*.desktop ~/.local/share/applications/
 fi
 

bin/omarchy-setup-steam

@@ -0,0 +1,9 @@
+#!/bin/bash
+
+echo "Adding multilib repository for 32-bit compatibility"
+sudo sed -i '/^\s*#\[multilib\]/,/^$/{s/^\s*#//}' /etc/pacman.conf
+sudo pacman -Sy
+
+echo "Now pick dependencies matching your graphics card"
+yay -S steam
+gtk-launch steam >/dev/null 2>&1 &

bin/omarchy-theme-bg-next

@@ -11,7 +11,7 @@ TOTAL=${#BACKGROUNDS[@]}
 if [[ $TOTAL -eq 0 ]]; then
   notify-send "No background was found for theme" -t 2000
   pkill -x swaybg
-  uwsm app -- swaybg --color '#000000' >/dev/null 2>&1 &
+  setsid uwsm app -- swaybg --color '#000000' >/dev/null 2>&1 &
 else
   # Get current background from symlink
   if [[ -L "$CURRENT_BACKGROUND_LINK" ]]; then
@@ -44,5 +44,5 @@ else
 
   # Relaunch swaybg
   pkill -x swaybg
-  uwsm app -- swaybg -i "$CURRENT_BACKGROUND_LINK" -m fill >/dev/null 2>&1 &
+  setsid uwsm app -- swaybg -i "$CURRENT_BACKGROUND_LINK" -m fill >/dev/null 2>&1 &
 fi

bin/omarchy-theme-install

@@ -12,9 +12,6 @@ REPO_URL="$1"
 THEMES_DIR="$HOME/.config/omarchy/themes"
 THEME_NAME=$(basename "$REPO_URL" .git | sed -E 's/^omarchy-//; s/-theme$//')
 THEME_PATH="$THEMES_DIR/$THEME_NAME"
-THEME_BACKGROUND_PATH="$THEME_PATH/backgrounds"
-BACKGROUNDS_PATH="$HOME/.config/omarchy/backgrounds"
-BACKGROUNDS_THEME_PATH="$BACKGROUNDS_PATH/$THEME_NAME"
 
 # Remove existing theme if present
 if [ -d "$THEME_PATH" ]; then
@@ -27,10 +24,5 @@ if ! git clone "$REPO_URL" "$THEME_PATH"; then
   exit 1
 fi
 
-# Link backgrounds if present
-if [ -d $THEME_BACKGROUND_PATH ]; then
-  ln -snf $THEME_BACKGROUND_PATH $BACKGROUNDS_THEME_PATH
-fi
-
 # Apply the new theme with omarchy-theme-set
 omarchy-theme-set $THEME_NAME

boot.sh

@@ -1,15 +1,17 @@
 #!/bin/bash
 
-ansi_art=' ▄██████▄    ▄▄▄▄███▄▄▄▄      ▄████████    ▄████████  ▄████████    ▄█    █▄    ▄██   ▄  
+ansi_art='                 ▄▄▄                                                   
-███    ███ ▄██▀▀▀███▀▀▀██▄   ███    ███   ███    ███ ███    ███   ███    ███   ███   ██▄
+ ▄█████▄    ▄███████████▄    ▄███████   ▄███████   ▄███████   ▄█   █▄    ▄█   █▄ 
-███    ███ ███   ███   ███   ███    ███   ███    ███ ███    █▀    ███    ███   ███▄▄▄███
+███   ███  ███   ███   ███  ███   ███  ███   ███  ███   ███  ███   ███  ███   ███
-███    ███ ███   ███   ███   ███    ███  ▄███▄▄▄▄██▀ ███         ▄███▄▄▄▄███▄▄ ▀▀▀▀▀▀███
+███   ███  ███   ███   ███  ███   ███  ███   ███  ███   █▀   ███   ███  ███   ███
-███    ███ ███   ███   ███ ▀███████████ ▀▀███▀▀▀▀▀   ███        ▀▀███▀▀▀▀███▀  ▄██   ███
+███   ███  ███   ███   ███ ▄███▄▄▄███ ▄███▄▄▄██▀  ███       ▄███▄▄▄███▄ ███▄▄▄███
-███    ███ ███   ███   ███   ███    ███ ▀███████████ ███    █▄    ███    ███   ███   ███
+███   ███  ███   ███   ███ ▀███▀▀▀███ ▀███▀▀▀▀    ███      ▀▀███▀▀▀███  ▀▀▀▀▀▀███
-███    ███ ███   ███   ███   ███    ███   ███    ███ ███    ███   ███    ███   ███   ███
+███   ███  ███   ███   ███  ███   ███ ██████████  ███   █▄   ███   ███  ▄██   ███
- ▀██████▀   ▀█   ███   █▀    ███    █▀    ███    ███ ████████▀    ███    █▀     ▀█████▀ 
+███   ███  ███   ███   ███  ███   ███  ███   ███  ███   ███  ███   ███  ███   ███
-                                          ███    ███                                    '
+ ▀█████▀    ▀█   ███   █▀   ███   █▀   ███   ███  ███████▀   ███   █▀    ▀█████▀ 
+                                       ███   █▀                                  '
 
+clear
 echo -e "\n$ansi_art\n"
 
 sudo pacman -Sy --noconfirm --needed git

config/hypr/hypridle.conf

@@ -2,6 +2,7 @@ general {
     lock_cmd = pidof hyprlock || hyprlock       # avoid starting multiple hyprlock instances.
     before_sleep_cmd = loginctl lock-session    # lock before suspend.
     after_sleep_cmd = hyprctl dispatch dpms on  # to avoid having to press a key twice to turn on the display.
+    on_unlock_cmd = pkill -SIGUSR2 waybar       # prevent stacking of waybar when waking
 }
 
 listener {

config/hypr/monitors.conf

@@ -1,17 +1,20 @@
 # See https://wiki.hyprland.org/Configuring/Monitors/
-
+# List current monitors and resolutions possible: hyprctl monitors
-# Change to 1 if on a 1x display (then change last "auto" to 1 in monitor=)
-# Change to something like 1.75 for fractional scaling (can work well with 1.66667 monitor scaling)
-# Note: You must relaunch Hyprland after changing any env like this (use Super+Esc, then Relaunch)
-env = GDK_SCALE,2
-
-# Use single default monitor (see all monitors with: hyprctl monitors)
 # Format: monitor = [port], resolution, position, scale
+# You must relaunch Hyprland after changing any envs (use Super+Esc, then Relaunch)
+
+# Optimized for retina-class 2x displays, like 13" 2.8K, 27" 5K, 32" 6K.
+env = GDK_SCALE,2
 monitor=,preferred,auto,auto
 
-# Exmaple for fractional scaling that works well with GDK_SCALE,1.75
+# Good compromise for 27" or 32" 4K monitors (but fractional!)
+# env = GDK_SCALE,1.75
 # monitor=,preferred,auto,1.666667
 
+# Straight 1x setup for low-resolution displays like 1080p or 1440p
+# env = GDK_SCALE,1
+# monitor=,preferred,auto,1
+
 # Example for Framework 13 w/ 6K XDR Apple display
-# monitor = DP-5, 6016x3384@60.00, auto, 2
+# monitor = DP-5, 6016x3384@60, auto, 2
-# monitor = eDP-1, 2880x1920@120.00, auto, 2
+# monitor = eDP-1, 2880x1920@120, auto, 2

config/walker/config.toml

@@ -139,6 +139,7 @@ name = "Calculator"
 icon = "accessories-calculator"
 placeholder = "Calculator"
 min_chars = 3                   # Min chars to calculate. 3 allows "3+3"
+prefix = "="
 
 [builtins.windows]
 weight = 5

config/waybar/config.jsonc

@@ -50,7 +50,8 @@
   "clock": {
     "format": "{:%A %H:%M}",
     "format-alt": "{:%d %B W%V %Y}",
-    "tooltip": false
+    "tooltip": false,
+    "on-click-right": "~/.local/share/omarchy/bin/omarchy-cmd-tzupdate"
   },
   "network": {
     "format-icons": ["󰤯","󰤟","󰤢","󰤥","󰤨"],

default/bash/init

@@ -7,8 +7,8 @@ if command -v zoxide &> /dev/null; then
 fi
 
 if command -v fzf &> /dev/null; then
-  if [[ -f /usr/share/bash-completion/completions/fzf ]]; then
+  if [[ -f /usr/share/fzf/completion.bash ]]; then
-    source /usr/share/bash-completion/completions/fzf
+    source /usr/share/fzf/completion.bash
   fi
   if [[ -f /usr/share/fzf/key-bindings.bash ]]; then
     source /usr/share/fzf/key-bindings.bash

default/bashrc

@@ -0,0 +1,14 @@
+# All the default Omarchy aliases and functions
+# (don't mess with these directly, just overwrite them here!)
+source ~/.local/share/omarchy/default/bash/rc
+
+# Add your own exports, aliases, and functions here.
+#
+# Make an alias for invoking commands you use constantly
+# alias p='python'
+#
+# Use VSCode instead of neovim as your default editor
+# export EDITOR="code"
+#
+# Set a custom prompt with the directory revealed (alternatively use https://starship.rs)
+# PS1="\W \[\e]0;\w\a\]$PS1"

default/hypr/bindings/tiling.conf

@@ -5,7 +5,7 @@ bind = SUPER, W, killactive,
 bind = SUPER, J, togglesplit, # dwindle
 bind = SUPER, P, pseudo, # dwindle
 bind = SUPER, V, togglefloating,
-bind = , F11, fullscreen, 0
+bind = SHIFT, F11, fullscreen, 0
 
 # Move focus with mainMod + arrow keys
 bind = SUPER, left, movefocus, l

default/hypr/bindings/utilities.conf

@@ -32,5 +32,8 @@ bind = CTRL, PRINT, exec, ~/.local/share/omarchy/bin/omarchy-cmd-screenshot outp
 bind = ALT, PRINT, exec, ~/.local/share/omarchy/bin/omarchy-cmd-screenrecord
 bind = CTRL ALT, PRINT, exec, ~/.local/share/omarchy/bin/omarchy-cmd-screenrecord output
 
+# Screensaver
+bind = SUPER ALT, SPACE, exec, ~/.local/share/omarchy/bin/omarchy-launch-screensaver
+
 # Color picker
 bind = SUPER, PRINT, exec, hyprpicker -a

default/hypr/windows.conf

@@ -5,19 +5,24 @@ windowrule = suppressevent maximize, class:.*
 windowrule = tile, class:^(Chromium)$
 
 # Float and center settings and previews
-windowrule = float, class:^(blueberry.py|Impala|Wiremix|org.gnome.NautilusPreviewer|Omarchy)$
+windowrule = float, class:^(blueberry.py|Impala|Wiremix|org.gnome.NautilusPreviewer|Omarchy|About)$
+windowrule = center, class:^(blueberry.py|Impala|Wiremix|org.gnome.NautilusPreviewer|Omarchy|About)$
 windowrule = size 800 600, class:^(blueberry.py|Impala|Wiremix|org.gnome.NautilusPreviewer|com.gabm.satty)$
-windowrule = size 645 450, class:Omarchy
+windowrule = size 590 400, class:Omarchy
-windowrule = center, class:^(blueberry.py|Impala|Wiremix|org.gnome.NautilusPreviewer|Omarchy)$
+windowrule = size 700 470 class:About
 
 # Float and center file pickers
 windowrule = float, class:xdg-desktop-portal-gtk, title:^(Open.*Files?|Save.*Files?|All Files|Save)
 windowrule = center, class:xdg-desktop-portal-gtk, title:^(Open.*Files?|Save.*Files?|All Files|Save)
 
 # Float Steam, fullscreen RetroArch
-windowrule = float, class:^(steam)$
+windowrule = float, class:steam
+windowrule = center, class:steam
 windowrule = fullscreen, class:^(com.libretro.RetroArch)$
 
+# Fullscreen screensaver
+windowrule = fullscreen, class:Screensaver
+
 # Just dash of opacity
 windowrule = opacity 0.97 0.9, class:.*
 windowrule = opacity 1 0.97, class:^(Chromium|chromium|google-chrome|google-chrome-unstable)$

install.sh

@@ -3,6 +3,8 @@
 # Exit immediately if a command exits with a non-zero status
 set -e
 
+OMARCHY_INSTALL=~/.local/share/omarchy/install
+
 # Give people a chance to retry running the installation
 catch_errors() {
   echo -e "\n\e[31mOmarchy installation failed!\e[0m"
@@ -12,16 +14,69 @@ catch_errors() {
 
 trap catch_errors ERR
 
-# Install everything
+show_logo() {
-for f in ~/.local/share/omarchy/install/*.sh; do
+  clear
-  echo -e "\nRunning installer: $f"
+  tte -i ~/.local/share/omarchy/logo.txt --frame-rate ${2:-120} ${1:-expand}
-  source "$f"
+  echo
-done
+}
 
-# Ensure locate is up to date now that everything has been installed
+show_subtext() {
+  echo "$1" | tte --frame-rate ${3:-640} ${2:-wipe}
+  echo
+}
+
+# Install prerequisites
+source $OMARCHY_INSTALL/preflight/aur.sh
+source $OMARCHY_INSTALL/preflight/presentation.sh
+
+# Configuration
+show_logo beams 240
+show_subtext "Let's install Omarchy! [1/5]"
+source $OMARCHY_INSTALL/config/identification.sh
+source $OMARCHY_INSTALL/config/config.sh
+source $OMARCHY_INSTALL/config/detect-keyboard-layout.sh
+source $OMARCHY_INSTALL/config/fix-fkeys.sh
+source $OMARCHY_INSTALL/config/network.sh
+source $OMARCHY_INSTALL/config/power.sh
+source $OMARCHY_INSTALL/config/login.sh
+source $OMARCHY_INSTALL/config/nvidia.sh
+
+# Development
+show_logo decrypt 920
+show_subtext "Installing terminal tools [2/5]"
+source $OMARCHY_INSTALL/development/terminal.sh
+source $OMARCHY_INSTALL/development/development.sh
+source $OMARCHY_INSTALL/development/nvim.sh
+source $OMARCHY_INSTALL/development/ruby.sh
+source $OMARCHY_INSTALL/development/docker.sh
+source $OMARCHY_INSTALL/development/firewall.sh
+
+# Desktop
+show_logo slice 60
+show_subtext "Installing desktop tools [3/5]"
+source $OMARCHY_INSTALL/desktop/desktop.sh
+source $OMARCHY_INSTALL/desktop/hyprlandia.sh
+source $OMARCHY_INSTALL/desktop/theme.sh
+source $OMARCHY_INSTALL/desktop/bluetooth.sh
+source $OMARCHY_INSTALL/desktop/asdcontrol.sh
+source $OMARCHY_INSTALL/desktop/fonts.sh
+source $OMARCHY_INSTALL/desktop/printer.sh
+
+# Apps
+show_logo expand
+show_subtext "Installing default applications [4/5]"
+source $OMARCHY_INSTALL/apps/webapps.sh
+source $OMARCHY_INSTALL/apps/xtras.sh
+source $OMARCHY_INSTALL/apps/mimetypes.sh
+
+# Updates
+show_logo highlight
+show_subtext "Updating system packages [5/5]"
 sudo updatedb
-
-# Update all built-in packages
 sudo pacman -Syu --noconfirm
 
-gum confirm "Reboot to apply all settings?" && reboot
+# Reboot
+show_logo laseretch 920
+show_subtext "You're done! So we'll be rebooting now..."
+sleep 2
+reboot

install/1-yay.sh

@@ -1,16 +0,0 @@
-#!/bin/bash
-
-sudo pacman -S --needed --noconfirm base-devel
-
-if ! command -v yay &>/dev/null; then
-  cd /tmp
-  git clone https://aur.archlinux.org/yay-bin.git
-  cd yay-bin
-  makepkg -si --noconfirm
-  cd -
-  rm -rf yay-bin
-  cd ~
-
-  # Add fun and color to the pacman installer
-  sudo sed -i '/^\[options\]/a Color\nILoveCandy' /etc/pacman.conf
-fi

install/apps/webapps.sh

@@ -12,5 +12,5 @@ if [ -z "$OMARCHY_BARE" ]; then
   web2app "YouTube" https://youtube.com/ https://cdn.jsdelivr.net/gh/homarr-labs/dashboard-icons/png/youtube.png
   web2app "GitHub" https://github.com/ https://cdn.jsdelivr.net/gh/homarr-labs/dashboard-icons/png/github-light.png
   web2app "X" https://x.com/ https://cdn.jsdelivr.net/gh/homarr-labs/dashboard-icons/png/x-light.png
-  web2app "Omarchy Manual" https://manuals.omamix.org/2/the-omarchy-manual https://manuals.omamix.org/rails/active_storage/blobs/redirect/eyJfcmFpbHMiOnsiZGF0YSI6NDgsInB1ciI6ImJsb2JfaWQifX0=--c26606490139480f5bcb3cf91b09fc45825007f6/omarchy.jpg?disposition=attachment
+  web2app "Omarchy Manual" https://manuals.omamix.org/2/the-omarchy-manual https://cdn.jsdelivr.net/gh/homarr-labs/dashboard-icons/png/arch-linux.png
 fi

install/config/config.sh

@@ -4,11 +4,17 @@
 cp -R ~/.local/share/omarchy/config/* ~/.config/
 
 # Use default bashrc from Omarchy
-echo "source ~/.local/share/omarchy/default/bash/rc" >~/.bashrc
+cp ~/.local/share/omarchy/default/bashrc ~/.bashrc
 
 # Ensure application directory exists for update-desktop-database
 mkdir -p ~/.local/share/applications
 
+# If bare install, allow a way for its exclusions to not get added in updates
+if [ -n "$OMARCHY_BARE" ]; then
+  mkdir -p ~/.local/state/omarchy
+  touch ~/.local/state/omarchy/bare.mode
+fi
+
 # Setup GPG configuration with multiple keyservers for better reliability
 sudo mkdir -p /etc/gnupg
 sudo cp ~/.local/share/omarchy/default/gpg/dirmngr.conf /etc/gnupg/

install/config/fix-fkeys.sh

@@ -3,6 +3,6 @@
 if [[ ! -f /etc/modprobe.d/hid_apple.conf ]]; then
   echo "options hid_apple fnmode=2" | sudo tee /etc/modprobe.d/hid_apple.conf
 
-  # Rely on install/plymouth.sh to do the rebuild
+  # Rely on install/login.sh to do the rebuild
   # sudo mkinitcpio -P
 fi

install/config/identification.sh

@@ -1,10 +1,4 @@
 #!/bin/bash
 
-# Need gum to query for input
-yay -S --noconfirm --needed gum
-
-# Configure identification
-source ~/.local/share/omarchy/ansi.sh
-echo -e "\nEnter identification for git and autocomplete..."
 export OMARCHY_USER_NAME=$(gum input --placeholder "Enter full name" --prompt "Name> ")
 export OMARCHY_USER_EMAIL=$(gum input --placeholder "Enter email address" --prompt "Email> ")

install/config/login.sh

@@ -0,0 +1,267 @@
+#!/bin/bash
+
+# Hyprland launched via UWSM and login directly as user, rely on disk encryption + hyprlock for security
+if ! command -v uwsm &>/dev/null || ! command -v plymouth &>/dev/null; then
+  yay -S --noconfirm --needed uwsm plymouth
+fi
+
+# ==============================================================================
+# PLYMOUTH SETUP
+# ==============================================================================
+
+if ! grep -Eq '^HOOKS=.*plymouth' /etc/mkinitcpio.conf; then
+  # Backup original mkinitcpio.conf just in case
+  backup_timestamp=$(date +"%Y%m%d%H%M%S")
+  sudo cp /etc/mkinitcpio.conf "/etc/mkinitcpio.conf.bak.${backup_timestamp}"
+
+  # Add plymouth to HOOKS array after 'base udev' or 'base systemd'
+  if grep "^HOOKS=" /etc/mkinitcpio.conf | grep -q "base systemd"; then
+    sudo sed -i '/^HOOKS=/s/base systemd/base systemd plymouth/' /etc/mkinitcpio.conf
+  elif grep "^HOOKS=" /etc/mkinitcpio.conf | grep -q "base udev"; then
+    sudo sed -i '/^HOOKS=/s/base udev/base udev plymouth/' /etc/mkinitcpio.conf
+  else
+    echo "Couldn't add the Plymouth hook"
+  fi
+
+  # Regenerate initramfs
+  sudo mkinitcpio -P
+fi
+
+# Add kernel parameters for Plymouth
+if [ -d "/boot/loader/entries" ]; then # systemd-boot
+  echo "Detected systemd-boot"
+
+  for entry in /boot/loader/entries/*.conf; do
+    if [ -f "$entry" ]; then
+      # Skip fallback entries
+      if [[ "$(basename "$entry")" == *"fallback"* ]]; then
+        echo "Skipped: $(basename "$entry") (fallback entry)"
+        continue
+      fi
+
+      # Skip if splash it already present for some reason
+      if ! grep -q "splash" "$entry"; then
+        sudo sed -i '/^options/ s/$/ splash quiet/' "$entry"
+      else
+        echo "Skipped: $(basename "$entry") (splash already present)"
+      fi
+    fi
+  done
+elif [ -f "/etc/default/grub" ]; then # Grub
+  echo "Detected grub"
+
+  # Backup GRUB config before modifying
+  backup_timestamp=$(date +"%Y%m%d%H%M%S")
+  sudo cp /etc/default/grub "/etc/default/grub.bak.${backup_timestamp}"
+
+  # Check if splash is already in GRUB_CMDLINE_LINUX_DEFAULT
+  if ! grep -q "GRUB_CMDLINE_LINUX_DEFAULT.*splash" /etc/default/grub; then
+    # Get current GRUB_CMDLINE_LINUX_DEFAULT value
+    current_cmdline=$(grep "^GRUB_CMDLINE_LINUX_DEFAULT=" /etc/default/grub | cut -d'"' -f2)
+
+    # Add splash and quiet if not present
+    new_cmdline="$current_cmdline"
+    if [[ ! "$current_cmdline" =~ splash ]]; then
+      new_cmdline="$new_cmdline splash"
+    fi
+    if [[ ! "$current_cmdline" =~ quiet ]]; then
+      new_cmdline="$new_cmdline quiet"
+    fi
+
+    # Trim any leading/trailing spaces
+    new_cmdline=$(echo "$new_cmdline" | xargs)
+
+    sudo sed -i "s/^GRUB_CMDLINE_LINUX_DEFAULT=\".*\"/GRUB_CMDLINE_LINUX_DEFAULT=\"$new_cmdline\"/" /etc/default/grub
+
+    # Regenerate grub config
+    sudo grub-mkconfig -o /boot/grub/grub.cfg
+  else
+    echo "GRUB already configured with splash kernel parameters"
+  fi
+elif [ -d "/etc/cmdline.d" ]; then # UKI
+  echo "Detected a UKI setup"
+  # Relying on mkinitcpio to assemble a UKI
+  # https://wiki.archlinux.org/title/Unified_kernel_image
+  if ! grep -q splash /etc/cmdline.d/*.conf; then
+    # Need splash, create the omarchy file
+    echo "splash" | sudo tee -a /etc/cmdline.d/omarchy.conf
+  fi
+  if ! grep -q quiet /etc/cmdline.d/*.conf; then
+    # Need quiet, create or append the omarchy file
+    echo "quiet" | sudo tee -a /etc/cmdline.d/omarchy.conf
+  fi
+elif [ -f "/etc/kernel/cmdline" ]; then # UKI Alternate
+  # Alternate UKI kernel cmdline location
+  echo "Detected a UKI setup"
+
+  # Backup kernel cmdline config before modifying
+  backup_timestamp=$(date +"%Y%m%d%H%M%S")
+  sudo cp /etc/kernel/cmdline "/etc/kernel/cmdline.bak.${backup_timestamp}"
+
+  current_cmdline=$(cat /etc/kernel/cmdline)
+
+  # Add splash and quiet if not present
+  new_cmdline="$current_cmdline"
+  if [[ ! "$current_cmdline" =~ splash ]]; then
+    new_cmdline="$new_cmdline splash"
+  fi
+  if [[ ! "$current_cmdline" =~ quiet ]]; then
+    new_cmdline="$new_cmdline quiet"
+  fi
+
+  # Trim any leading/trailing spaces
+  new_cmdline=$(echo "$new_cmdline" | xargs)
+
+  # Write new file
+  echo $new_cmdline | sudo tee /etc/kernel/cmdline
+else
+  echo ""
+  echo " None of systemd-boot, GRUB, or UKI detected. Please manually add these kernel parameters:"
+  echo "  - splash (to see the graphical splash screen)"
+  echo "  - quiet (for silent boot)"
+  echo ""
+fi
+
+if [ "$(plymouth-set-default-theme)" != "omarchy" ]; then
+  sudo cp -r "$HOME/.local/share/omarchy/default/plymouth" /usr/share/plymouth/themes/omarchy/
+  sudo plymouth-set-default-theme -R omarchy
+fi
+
+# ==============================================================================
+# SEAMLESS LOGIN
+# ==============================================================================
+
+if [ ! -x /usr/local/bin/seamless-login ]; then
+  # Compile the seamless login helper -- needed to prevent seeing terminal between loader and desktop
+  cat <<'CCODE' >/tmp/seamless-login.c
+/*
+* Seamless Login - Minimal SDDM-style Plymouth transition
+* Replicates SDDM's VT management for seamless auto-login
+*/
+#include <stdio.h>
+#include <stdlib.h>
+#include <unistd.h>
+#include <fcntl.h>
+#include <sys/ioctl.h>
+#include <linux/kd.h>
+#include <linux/vt.h>
+#include <sys/wait.h>
+#include <string.h>
+
+int main(int argc, char *argv[]) {
+    int vt_fd;
+    int vt_num = 1; // TTY1
+    char vt_path[32];
+    
+    if (argc < 2) {
+        fprintf(stderr, "Usage: %s <session_command>\n", argv[0]);
+        return 1;
+    }
+    
+    // Open the VT (simple approach like SDDM)
+    snprintf(vt_path, sizeof(vt_path), "/dev/tty%d", vt_num);
+    vt_fd = open(vt_path, O_RDWR);
+    if (vt_fd < 0) {
+        perror("Failed to open VT");
+        return 1;
+    }
+    
+    // Activate the VT
+    if (ioctl(vt_fd, VT_ACTIVATE, vt_num) < 0) {
+        perror("VT_ACTIVATE failed");
+        close(vt_fd);
+        return 1;
+    }
+    
+    // Wait for VT to be active
+    if (ioctl(vt_fd, VT_WAITACTIVE, vt_num) < 0) {
+        perror("VT_WAITACTIVE failed");
+        close(vt_fd);
+        return 1;
+    }
+    
+    // Critical: Set graphics mode to prevent console text
+    if (ioctl(vt_fd, KDSETMODE, KD_GRAPHICS) < 0) {
+        perror("KDSETMODE KD_GRAPHICS failed");
+        close(vt_fd);
+        return 1;
+    }
+    
+    // Clear VT and close (like SDDM does)
+    const char *clear_seq = "\33[H\33[2J";
+    if (write(vt_fd, clear_seq, strlen(clear_seq)) < 0) {
+        perror("Failed to clear VT");
+    }
+    
+    close(vt_fd);
+    
+    // Set working directory to user's home
+    const char *home = getenv("HOME");
+    if (home) chdir(home);
+    
+    // Now execute the session command
+    execvp(argv[1], &argv[1]);
+    perror("Failed to exec session");
+    return 1;
+}
+CCODE
+
+  gcc -o /tmp/seamless-login /tmp/seamless-login.c
+  sudo mv /tmp/seamless-login /usr/local/bin/seamless-login
+  sudo chmod +x /usr/local/bin/seamless-login
+  rm /tmp/seamless-login.c
+fi
+
+if [ ! -f /etc/systemd/system/omarchy-seamless-login.service ]; then
+  cat <<EOF | sudo tee /etc/systemd/system/omarchy-seamless-login.service
+[Unit]
+Description=Omarchy Seamless Auto-Login
+Documentation=https://github.com/basecamp/omarchy
+Conflicts=getty@tty1.service
+After=systemd-user-sessions.service getty@tty1.service plymouth-quit.service systemd-logind.service
+PartOf=graphical.target
+
+[Service]
+Type=simple
+ExecStart=/usr/local/bin/seamless-login uwsm start -- hyprland.desktop
+Restart=always
+RestartSec=2
+User=$USER
+TTYPath=/dev/tty1
+TTYReset=yes
+TTYVHangup=yes
+TTYVTDisallocate=yes
+StandardInput=tty
+StandardOutput=journal
+StandardError=journal+console
+PAMName=login
+
+[Install]
+WantedBy=graphical.target
+EOF
+fi
+
+if [ ! -f /etc/systemd/system/plymouth-quit.service.d/wait-for-graphical.conf ]; then
+  # Make plymouth remain until graphical.target
+  sudo mkdir -p /etc/systemd/system/plymouth-quit.service.d
+  sudo tee /etc/systemd/system/plymouth-quit.service.d/wait-for-graphical.conf <<'EOF'
+[Unit]
+After=multi-user.target
+EOF
+fi
+
+# Mask plymouth-quit-wait.service only if not already masked
+if ! systemctl is-enabled plymouth-quit-wait.service | grep -q masked; then
+  sudo systemctl mask plymouth-quit-wait.service
+  sudo systemctl daemon-reload
+fi
+
+# Enable omarchy-seamless-login.service only if not already enabled
+if ! systemctl is-enabled omarchy-seamless-login.service | grep -q enabled; then
+  sudo systemctl enable omarchy-seamless-login.service
+fi
+
+# Disable getty@tty1.service only if not already disabled
+if ! systemctl is-enabled getty@tty1.service | grep -q disabled; then
+  sudo systemctl disable getty@tty1.service
+fi

install/config/nvidia.sh

@@ -12,6 +12,9 @@
 
 # --- GPU Detection ---
 if [ -n "$(lspci | grep -i 'nvidia')" ]; then
+  show_logo
+  show_subtext "Install NVIDIA drivers..."
+
   # --- Driver Selection ---
   # Turing (16xx, 20xx), Ampere (30xx), Ada (40xx), and newer recommend the open-source kernel modules
   if echo "$(lspci | grep -i 'nvidia')" | grep -q -E "RTX [2-9][0-9]|GTX 16"; then

install/config/timezones.sh

@@ -0,0 +1,9 @@
+#!/bin/bash
+
+if [[ ! -f /etc/sudoers.d/omarchy-tzupdate ]]; then
+  yay -S --noconfirm --needed tzupdate
+  sudo tee /etc/sudoers.d/omarchy-tzupdate >/dev/null <<EOF
+%wheel ALL=(root) NOPASSWD: /usr/bin/tzupdate, /usr/bin/timedatectl
+EOF
+  sudo chmod 0440 /etc/sudoers.d/omarchy-tzupdate
+fi

install/desktop/theme.sh

@@ -1,16 +1,21 @@
 #!/bin/bash
 
 # Use dark mode for QT apps too (like kdenlive)
-sudo pacman -S --noconfirm kvantum-qt5
+if ! yay -Q kvantum-qt5 &>/dev/null; then
+  yay -S --noconfirm kvantum-qt5
+fi
 
 # Prefer dark mode everything
-sudo pacman -S --noconfirm gnome-themes-extra # Adds Adwaita-dark theme
+if ! yay -Q gnome-themes-extra &>/dev/null; then
+  yay -S --noconfirm gnome-themes-extra # Adds Adwaita-dark theme
+fi
+
 gsettings set org.gnome.desktop.interface gtk-theme "Adwaita-dark"
 gsettings set org.gnome.desktop.interface color-scheme "prefer-dark"
 
 # Setup theme links
 mkdir -p ~/.config/omarchy/themes
-for f in ~/.local/share/omarchy/themes/*; do ln -s "$f" ~/.config/omarchy/themes/; done
+for f in ~/.local/share/omarchy/themes/*; do ln -nfs "$f" ~/.config/omarchy/themes/; done
 
 # Set initial theme
 mkdir -p ~/.config/omarchy/current

install/login.sh

@@ -1,126 +0,0 @@
-#!/bin/bash
-
-# Hyprland launched via UWSM and login directly as user, rely on disk encryption + hyprlock for security
-yay -S --noconfirm --needed uwsm
-
-# Compile the seamless login helper -- needed to prevent seeing terminal between loader and desktop
-cat <<'CCODE' >/tmp/seamless-login.c
-/*
- * Seamless Login - Minimal SDDM-style Plymouth transition
- * Replicates SDDM's VT management for seamless auto-login
- */
-#include <stdio.h>
-#include <stdlib.h>
-#include <unistd.h>
-#include <fcntl.h>
-#include <sys/ioctl.h>
-#include <linux/kd.h>
-#include <linux/vt.h>
-#include <sys/wait.h>
-#include <string.h>
-
-int main(int argc, char *argv[]) {
-    int vt_fd;
-    int vt_num = 1; // TTY1
-    char vt_path[32];
-    
-    if (argc < 2) {
-        fprintf(stderr, "Usage: %s <session_command>\n", argv[0]);
-        return 1;
-    }
-    
-    // Open the VT (simple approach like SDDM)
-    snprintf(vt_path, sizeof(vt_path), "/dev/tty%d", vt_num);
-    vt_fd = open(vt_path, O_RDWR);
-    if (vt_fd < 0) {
-        perror("Failed to open VT");
-        return 1;
-    }
-    
-    // Activate the VT
-    if (ioctl(vt_fd, VT_ACTIVATE, vt_num) < 0) {
-        perror("VT_ACTIVATE failed");
-        close(vt_fd);
-        return 1;
-    }
-    
-    // Wait for VT to be active
-    if (ioctl(vt_fd, VT_WAITACTIVE, vt_num) < 0) {
-        perror("VT_WAITACTIVE failed");
-        close(vt_fd);
-        return 1;
-    }
-    
-    // Critical: Set graphics mode to prevent console text
-    if (ioctl(vt_fd, KDSETMODE, KD_GRAPHICS) < 0) {
-        perror("KDSETMODE KD_GRAPHICS failed");
-        close(vt_fd);
-        return 1;
-    }
-    
-    // Clear VT and close (like SDDM does)
-    const char *clear_seq = "\33[H\33[2J";
-    if (write(vt_fd, clear_seq, strlen(clear_seq)) < 0) {
-        perror("Failed to clear VT");
-    }
-    
-    close(vt_fd);
-    
-    // Set working directory to user's home
-    const char *home = getenv("HOME");
-    if (home) chdir(home);
-    
-    // Now execute the session command
-    execvp(argv[1], &argv[1]);
-    perror("Failed to exec session");
-    return 1;
-}
-CCODE
-
-gcc -o /tmp/seamless-login /tmp/seamless-login.c
-sudo mv /tmp/seamless-login /usr/local/bin/seamless-login
-sudo chmod +x /usr/local/bin/seamless-login
-rm /tmp/seamless-login.c
-
-cat <<EOF | sudo tee /etc/systemd/system/omarchy-seamless-login.service
-[Unit]
-Description=Omarchy Seamless Auto-Login
-Documentation=https://github.com/basecamp/omarchy
-Conflicts=getty@tty1.service
-After=systemd-user-sessions.service getty@tty1.service plymouth-quit.service systemd-logind.service
-PartOf=graphical.target
-
-[Service]
-Type=simple
-ExecStart=/usr/local/bin/seamless-login uwsm start -- hyprland.desktop
-Restart=always
-RestartSec=2
-User=$USER
-TTYPath=/dev/tty1
-TTYReset=yes
-TTYVHangup=yes
-TTYVTDisallocate=yes
-StandardInput=tty
-StandardOutput=journal
-StandardError=journal+console
-PAMName=login
-
-[Install]
-WantedBy=graphical.target
-EOF
-
-# Make plymouth remain until graphical.target
-sudo mkdir -p /etc/systemd/system/plymouth-quit.service.d
-sudo tee /etc/systemd/system/plymouth-quit.service.d/wait-for-graphical.conf <<'EOF'
-[Unit]
-After=multi-user.target
-EOF
-
-# Prevent plymouth-quit-wait.service
-sudo systemctl mask plymouth-quit-wait.service
-
-sudo systemctl daemon-reload
-sudo systemctl enable omarchy-seamless-login.service
-
-# Disable getty@tty1 to prevent conflicts
-sudo systemctl disable getty@tty1.service

install/plymouth.sh

@@ -1,121 +0,0 @@
-#!/bin/bash
-
-if ! command -v plymouth &>/dev/null; then
-  yay -S --noconfirm --needed plymouth
-
-  # Skip if plymouth already exists for some reason
-  # Backup original mkinitcpio.conf just in case
-  backup_timestamp=$(date +"%Y%m%d%H%M%S")
-  sudo cp /etc/mkinitcpio.conf "/etc/mkinitcpio.conf.bak.${backup_timestamp}"
-
-  # Add plymouth to HOOKS array after 'base udev' or 'base systemd'
-  if grep "^HOOKS=" /etc/mkinitcpio.conf | grep -q "base systemd"; then
-    sudo sed -i '/^HOOKS=/s/base systemd/base systemd plymouth/' /etc/mkinitcpio.conf
-  elif grep "^HOOKS=" /etc/mkinitcpio.conf | grep -q "base udev"; then
-    sudo sed -i '/^HOOKS=/s/base udev/base udev plymouth/' /etc/mkinitcpio.conf
-  else
-    echo "Couldn't add the Plymouth hook"
-  fi
-
-  # Regenerate initramfs
-  sudo mkinitcpio -P
-
-  # Add kernel parameters for Plymouth (systemd-boot only)
-  if [ -d "/boot/loader/entries" ]; then
-    echo "Detected systemd-boot"
-
-    for entry in /boot/loader/entries/*.conf; do
-      if [ -f "$entry" ]; then
-        # Skip fallback entries
-        if [[ "$(basename "$entry")" == *"fallback"* ]]; then
-          echo "Skipped: $(basename "$entry") (fallback entry)"
-          continue
-        fi
-
-        # Skip if splash it already present for some reason
-        if ! grep -q "splash" "$entry"; then
-          sudo sed -i '/^options/ s/$/ splash quiet/' "$entry"
-        else
-          echo "Skipped: $(basename "$entry") (splash already present)"
-        fi
-      fi
-    done
-  elif [ -f "/etc/default/grub" ]; then
-    echo "Detected grub"
-    # Backup GRUB config before modifying
-    backup_timestamp=$(date +"%Y%m%d%H%M%S")
-    sudo cp /etc/default/grub "/etc/default/grub.bak.${backup_timestamp}"
-
-    # Check if splash is already in GRUB_CMDLINE_LINUX_DEFAULT
-    if ! grep -q "GRUB_CMDLINE_LINUX_DEFAULT.*splash" /etc/default/grub; then
-      # Get current GRUB_CMDLINE_LINUX_DEFAULT value
-      current_cmdline=$(grep "^GRUB_CMDLINE_LINUX_DEFAULT=" /etc/default/grub | cut -d'"' -f2)
-
-      # Add splash and quiet if not present
-      new_cmdline="$current_cmdline"
-      if [[ ! "$current_cmdline" =~ splash ]]; then
-        new_cmdline="$new_cmdline splash"
-      fi
-      if [[ ! "$current_cmdline" =~ quiet ]]; then
-        new_cmdline="$new_cmdline quiet"
-      fi
-
-      # Trim any leading/trailing spaces
-      new_cmdline=$(echo "$new_cmdline" | xargs)
-
-      sudo sed -i "s/^GRUB_CMDLINE_LINUX_DEFAULT=\".*\"/GRUB_CMDLINE_LINUX_DEFAULT=\"$new_cmdline\"/" /etc/default/grub
-
-      # Regenerate grub config
-      sudo grub-mkconfig -o /boot/grub/grub.cfg
-    else
-      echo "GRUB already configured with splash kernel parameters"
-    fi
-  elif [ -d "/etc/cmdline.d" ]; then
-    echo "Detected a UKI setup"
-    # Relying on mkinitcpio to assemble a UKI
-    # https://wiki.archlinux.org/title/Unified_kernel_image
-    if ! grep -q splash /etc/cmdline.d/*.conf; then
-      # Need splash, create the omarchy file
-      echo "splash" | sudo tee -a /etc/cmdline.d/omarchy.conf
-    fi
-    if ! grep -q quiet /etc/cmdline.d/*.conf; then
-      # Need quiet, create or append the omarchy file
-      echo "quiet" | sudo tee -a /etc/cmdline.d/omarchy.conf
-    fi
-  elif [ -f "/etc/kernel/cmdline" ]; then
-    # Alternate UKI kernel cmdline location
-    echo "Detected a UKI setup"
-
-    # Backup kernel cmdline config before modifying
-    backup_timestamp=$(date +"%Y%m%d%H%M%S")
-    sudo cp /etc/kernel/cmdline "/etc/kernel/cmdline.bak.${backup_timestamp}"
-
-    current_cmdline=$(cat /etc/kernel/cmdline)
-
-    # Add splash and quiet if not present
-    new_cmdline="$current_cmdline"
-    if [[ ! "$current_cmdline" =~ splash ]]; then
-      new_cmdline="$new_cmdline splash"
-    fi
-    if [[ ! "$current_cmdline" =~ quiet ]]; then
-      new_cmdline="$new_cmdline quiet"
-    fi
-
-    # Trim any leading/trailing spaces
-    new_cmdline=$(echo "$new_cmdline" | xargs)
-
-    # Write new file
-    echo $new_cmdline | sudo tee /etc/kernel/cmdline
-  else
-    echo ""
-    echo "Neither systemd-boot nor GRUB detected. Please manually add these kernel parameters:"
-    echo "  - splash (to see the graphical splash screen)"
-    echo "  - quiet (for silent boot)"
-    echo ""
-  fi
-
-  # Copy and set the Plymouth theme
-  sudo cp -r "$HOME/.local/share/omarchy/default/plymouth" /usr/share/plymouth/themes/omarchy/
-
-  sudo plymouth-set-default-theme -R omarchy
-fi

install/preflight/aur.sh

@@ -0,0 +1,41 @@
+#!/bin/bash
+
+# Only add Chaotic-AUR if the architecture is x86_64 so ARM users can build the packages
+if [[ "$(uname -m)" == "x86_64" ]] && ! command -v yay &>/dev/null; then
+  # Try installing Chaotic-AUR keyring and mirrorlist
+  if ! pacman-key --list-keys 3056513887B78AEB >/dev/null 2>&1 &&
+    sudo pacman-key --recv-key 3056513887B78AEB &&
+    sudo pacman-key --lsign-key 3056513887B78AEB &&
+    sudo pacman -U --noconfirm 'https://cdn-mirror.chaotic.cx/chaotic-aur/chaotic-keyring.pkg.tar.zst' &&
+    sudo pacman -U --noconfirm 'https://cdn-mirror.chaotic.cx/chaotic-aur/chaotic-mirrorlist.pkg.tar.zst'; then
+
+    # Add Chaotic-AUR repo to pacman config
+    if ! grep -q "chaotic-aur" /etc/pacman.conf; then
+      echo -e '\n[chaotic-aur]\nInclude = /etc/pacman.d/chaotic-mirrorlist' | sudo tee -a /etc/pacman.conf >/dev/null
+    fi
+
+    # Install yay directly from Chaotic-AUR
+    sudo pacman -Sy --needed --noconfirm yay
+  else
+    echo "Failed to install Chaotic-AUR, so won't include it in pacman config!"
+  fi
+fi
+
+# Manually install yay from AUR if not already available
+if ! command -v yay &>/dev/null; then
+  # Install build tools
+  sudo pacman -Sy --needed --noconfirm base-devel
+  cd /tmp
+  rm -rf yay-bin
+  git clone https://aur.archlinux.org/yay-bin.git
+  cd yay-bin
+  makepkg -si --noconfirm
+  cd -
+  rm -rf yay-bin
+  cd ~
+fi
+
+# Add fun and color to the pacman installer
+if ! grep -q "ILoveCandy" /etc/pacman.conf; then
+  sudo sed -i '/^\[options\]/a Color\nILoveCandy' /etc/pacman.conf
+fi

install/preflight/presentation.sh

@@ -0,0 +1,3 @@
+#!/bin/bash
+
+yay -S --noconfirm --needed gum python-terminaltexteffects

logo.txt

@@ -0,0 +1,10 @@
+                 ▄▄▄
+ ▄█████▄    ▄███████████▄    ▄███████   ▄███████   ▄███████   ▄█   █▄    ▄█   █▄
+███   ███  ███   ███   ███  ███   ███  ███   ███  ███   ███  ███   ███  ███   ███
+███   ███  ███   ███   ███  ███   ███  ███   ███  ███   █▀   ███   ███  ███   ███
+███   ███  ███   ███   ███ ▄███▄▄▄███ ▄███▄▄▄██▀  ███       ▄███▄▄▄███▄ ███▄▄▄███
+███   ███  ███   ███   ███ ▀███▀▀▀███ ▀███▀▀▀▀    ███      ▀▀███▀▀▀███  ▀▀▀▀▀▀███
+███   ███  ███   ███   ███  ███   ███ ██████████  ███   █▄   ███   ███  ▄██   ███
+███   ███  ███   ███   ███  ███   ███  ███   ███  ███   ███  ███   ███  ███   ███
+ ▀█████▀    ▀█   ███   █▀   ███   █▀   ███   ███  ███████▀   ███   █▀    ▀█████▀
+                                       ███   █▀

migrations/1752081088.sh

@@ -1,2 +1,2 @@
 echo "Permanently fix F-keys on Apple-mode keyboards (like Lofree Flow84)"
-source ~/.local/share/omarchy/install/fix-fkeys.sh
+source ~/.local/share/omarchy/install/config/fix-fkeys.sh

migrations/1752091783.sh

@@ -1,2 +1,2 @@
 echo "Install Plymouth splash screen"
-source "$HOME/.local/share/omarchy/install/plymouth.sh"
+source "$HOME/.local/share/omarchy/install/login.sh"

migrations/1752292967.sh

@@ -14,6 +14,5 @@ if ! command -v uwsm &>/dev/null; then
     sed -i 's/^GTK_IM_MODULE=fcitx$//' "$HOME/.config/environment.d/fcitx.conf"
   fi
 
-  omarchy-refresh-plymouth -y
+  source ~/.local/share/omarchy/install/config/login.sh
-  source ~/.local/share/omarchy/install/login.sh
 fi

migrations/1752709610.sh

@@ -1,2 +1,2 @@
 echo "Enable ufw firewall"
-source ~/.local/share/omarchy/install/firewall.sh
+source ~/.local/share/omarchy/install/development/firewall.sh

migrations/1752983008.sh

@@ -1,5 +1,7 @@
-echo "Add missing installation of Zoom"
+if [[ ! -f ~/.local/state/omarchy/bare.mode ]]; then
+  echo "Add missing installation of Zoom"
 
-if ! command -v zoom &>/dev/null; then
+  if ! command -v zoom &>/dev/null; then
-  yay -S --noconfirm --needed zoom
+    yay -S --noconfirm --needed zoom
+  fi
 fi

migrations/1753138691.sh

@@ -1,6 +1,6 @@
 echo "Install swayOSD to show volume status"
 
-if ! command -v swayosd &>/dev/null; then
+if ! command -v swayosd-server &>/dev/null; then
   yay -S --noconfirm --needed swayosd
   setsid uwsm app -- swayosd-server &>/dev/null &
 fi

migrations/1753302134.sh

@@ -0,0 +1,8 @@
+echo "Reload Waybar on unlock to prevent stacking"
+
+if ! grep -q 'on_unlock_cmd *= *pkill -SIGUSR2 waybar' ~/.config/hypr/hypridle.conf; then
+  sed -i '/^general[[:space:]]*{/,/^}/ {
+    /on_unlock_cmd *=/d
+    /^}$/ i\    on_unlock_cmd = pkill -SIGUSR2 waybar       # prevent stacking of waybar when waking
+  }' ~/.config/hypr/hypridle.conf
+fi

migrations/1753352057.sh

@@ -0,0 +1,20 @@
+echo "Add Chaotic-AUR to get compiled binaries"
+
+if [[ "$(uname -m)" == "x86_64" ]] && ! grep -q '^\[chaotic-aur\]' /etc/pacman.conf; then
+  # Try installing Chaotic-AUR keyring and mirrorlist
+  if sudo pacman-key --recv-key 3056513887B78AEB &&
+    sudo pacman-key --lsign-key 3056513887B78AEB &&
+    sudo pacman -U --noconfirm 'https://cdn-mirror.chaotic.cx/chaotic-aur/chaotic-keyring.pkg.tar.zst' &&
+    sudo pacman -U --noconfirm 'https://cdn-mirror.chaotic.cx/chaotic-aur/chaotic-mirrorlist.pkg.tar.zst'; then
+
+    # Add Chaotic-AUR repo to pacman config
+    echo -e '\n[chaotic-aur]\nInclude = /etc/pacman.d/chaotic-mirrorlist' | sudo tee -a /etc/pacman.conf >/dev/null
+
+    # Refresh pacman package databases
+    sudo pacman -Sy
+
+    chaotic_ok=1
+  else
+    echo "Failed to install Chaotic-AUR, so won't include it in pacman config!"
+  fi
+fi

migrations/1753468218.sh

@@ -0,0 +1,4 @@
+echo "Add Terminal Text Effects for rizzing Omarchy"
+if ! yay -Qe python-terminaltexteffects &>/dev/null; then
+  yay -S --noconfirm --needed python-terminaltexteffects
+fi

migrations/1753495989.sh

@@ -0,0 +1,5 @@
+echo "Allow updating of timezone by right-clicking on the clock (or running omarchy-cmd-tzupdate)"
+if [[ ! -f /etc/sudoers.d/omarchy-tzupdate ]]; then
+  bash ~/.local/share/omarchy/install/config/timezones.sh
+  omarchy-refresh-waybar
+fi

migrations/1753558374.sh

@@ -0,0 +1,4 @@
+echo "Update Walker config to include = as the leader key for the calculator"
+if ! grep -q 'prefix = "="' ~/.config/walker/config.toml; then
+  omarchy-refresh-walker
+fi

omarchy.svg

@@ -0,0 +1 @@
+<svg fill="none" height="285" viewBox="0 0 1215 285" width="1215" xmlns="http://www.w3.org/2000/svg"><g fill="#000"><path clip-rule="evenodd" d="m720 120h-15v15h-14.998v14.999l-60.002.001v15.002l90-.002v.002h.002l-.002 89.998h-15v15h-13v15h-17v-89.998h-45v90l-45-.002v-89.998h-14.998v-30h14.998v-15.002h-14.998v-30.001h14.998v-75h15v-14.997h15v-15.002h105.002zm-90-.001h45v-74.997h-45z" fill-rule="evenodd"/><path clip-rule="evenodd" d="m105 30.002h15v14.997h15v180.001h-15v15h-15v15.002h-75v-15.002h-15v-15h-15v-180.001h15v-14.997h15v-15.002h75zm-60 194.998h45v-179.998h-45z" fill-rule="evenodd"/><path d="m300 15h60v15h15v14.999h15v180.001h-15v15h-15v15h-15l-.004-209.998h-44.994v-.002h-.002v210.002h-45v-210h-44.998v179.997h-.002v30.003h-15v-15.002h-15v-15h-14.998v-180.001h14.998v-14.999h15v-15h60v-15h45z"/><path clip-rule="evenodd" d="m555 225h-15v15h-15v15h-15v-105.001l-44.998.001v105.002h-45.002v-105.002h-15v-30.001h15v-75h15.002v-14.997h15v-15.002h105zm-89.998-105.001h44.998v-74.997h-44.998z" fill-rule="evenodd"/><path d="m885 75h-15v15h-15v15h-15v-59.998h-45v179.998h45v-59.998h15v14.997h15v15.001h15v30h-15v15h-15v15.002l-105-.002v-210.001h14.998v-14.997h15.002v-15.002h105z"/><path d="m960 119.999h45v-104.999h15v15h15v14.999h15v75.001h15v15h-15v90h-15v15h-15v15h-15v-105h-45v105.002l-45-.002v-105h-30v-15h15v-15.001h15v-75h15v-14.997h15v-15.002h15z"/><path d="m1125 119.999h45v-104.999h15v15h15v15h15v180h-15v15h-15v15.002l-75-.002v-15h-15v-15h-15v-45.001h15v-14.997-.002h30v60h45v-75h-90v-105.001h15v-14.997h15v-15.002h15z"/></g></svg>

themes/catppuccin-latte/hyprland.conf

@@ -1,8 +1,4 @@
-# https://wiki.hyprland.org/Configuring/Variables/#variable-types for info about colors
-
-$latte_blue = rgb(1e66f5)
-
 general {
-    col.active_border = $latte_blue
+    col.active_border = rgb(1e66f5)
 }
 

themes/catppuccin-latte/mako.ini

@@ -1,5 +1,5 @@
 text-color=#4c4f69
-border-color=#dce0e8
+border-color=#1e66f5
 background-color=#eff1f5
 width=420
 height=110

themes/catppuccin-latte/swayosd.css

@@ -1,6 +1,5 @@
 @define-color background-color #eff1f5;
-@define-color border-color #4c4f69;
+@define-color border-color #1e66f5;
 @define-color label #4c4f69;
 @define-color image #4c4f69;
 @define-color progress #4c4f69;
-

themes/catppuccin/hyprland.conf

@@ -1,4 +1,3 @@
 general {
-    # https://wiki.hyprland.org/Configuring/Variables/#variable-types for info about colors
     col.active_border = rgb(c6d0f5)
 }

themes/catppuccin/swayosd.css

@@ -1,6 +1,5 @@
 @define-color background-color #24273a;
 @define-color border-color #c6d0f5;
-@define-color label #c6d0f5;
+@define-color label #cad3f5;
-@define-color image #c6d0f5;
+@define-color image #cad3f5;
-@define-color progress #c6d0f5;
+@define-color progress #cad3f5;
-

themes/everforest/hyprland.conf

@@ -1,4 +1,3 @@
 general {
-    # https://wiki.hyprland.org/Configuring/Variables/#variable-types for info about colors
     col.active_border = rgb(d3c6aa)
 }

themes/gruvbox/hyprland.conf

@@ -1,4 +1,3 @@
 general {
-    # https://wiki.hyprland.org/Configuring/Variables/#variable-types for info about colors
     col.active_border = rgb(a89984)
 }

themes/gruvbox/swayosd.css

@@ -1,5 +1,5 @@
 @define-color background-color #282828;
-@define-color border-color #ebdbb2;
+@define-color border-color #a89984;
 @define-color label #ebdbb2;
 @define-color image #ebdbb2;
 @define-color progress #ebdbb2;

themes/kanagawa/hyprland.conf

@@ -1,4 +1,3 @@
 general {
-    # https://wiki.hyprland.org/Configuring/Variables/#variable-types for info about colors
     col.active_border = rgb(dcd7ba)
 }

themes/matte-black/hyprland.conf

@@ -1,4 +1,3 @@
 general {
-    # https://wiki.hyprland.org/Configuring/Variables/#variable-types for info about colors
     col.active_border = rgb(8A8A8D)
 }

themes/matte-black/neovim.lua

@@ -1,192 +1,9 @@
 return {
-  "EdenEast/nightfox.nvim",
+  { "tahayvr/matteblack.nvim", lazy = false, priority = 1000 },
-  lazy = false,
+  {
-  priority = 1000,
+		"LazyVim/LazyVim",
-  dependencies = {
+		opts = {
-    "folke/snacks.nvim",
+			colorscheme = "matteblack",
-    "nvim-tree/nvim-web-devicons",
+		},
-    "nvim-lualine/lualine.nvim",
+	},
-  },
-
-  config = function()
-    local nightfox = require('nightfox')
-    local Shade = require('nightfox.lib.shade')
-    local c = require('nightfox.lib.color')
-
-    local matte_black_palette = {
-      -- Base "Matte Black" Palette Overrides
-      bg0 = "#0D0D0D", bg1 = "#121212", bg2 = "#1E1E1E", bg3 = "#2C2C2C", bg4 = "#333333",
-      fg0 = "#FFFFFF", fg1 = "#EAEAEA", fg2 = "#BEBEBE", fg3 = "#8A8A8D",
-      sel0 = "#2C2C2C",
-      sel1 = c.from_hex("#2C2C2C"):blend(c.from_hex("#F59E0B"), 0.2):to_css(),
-      comment = "#8A8A8D",
-      red = Shade.new("#D35F5F", c.from_hex("#D35F5F"):lighten(8):to_css(), "#B91C1C"),
-      orange = Shade.new("#F59E0B", "#FFC107", c.from_hex("#F59E0B"):lighten(-8):to_css()),
-      yellow = Shade.new("#FFC107", c.from_hex("#FFC107"):lighten(10):to_css(), "#F59E0B"),
-      white = Shade.new("#EAEAEA", "#FFFFFF", "#BEBEBE"),
-      black = Shade.new("#333333", "#8A8A8D", "#1E1E1E"),
-      green = Shade.new("#8A9A7B", "#A5B799", "#6F7C62"),
-      cyan = Shade.new("#88AABB", "#A2C4D3", "#6E8A99"),
-      blue = Shade.new("#8A9FBE", "#A4BBDD", "#7084A1"),
-      magenta = Shade.new("#C1A1C1", "#D9B9D9", "#A989A9"),
-      pink = Shade.new("#D398A7", "#EBC0CB", "#B97E8D"),
-
-      -- Lualine Palette Extensions
-      lualine_normal_bg = "#F59E0B",
-      lualine_insert_bg = "#B91C1C",
-      lualine_visual_bg = "#C1A1C1",
-      lualine_command_bg = "#F59E0B",
-      lualine_inactive_bg = c.from_hex("#121212"):lighten(5):to_css(),
-
-      -- Treesitter Palette Extensions
-      ts_parameter = "#D398A7",
-      ts_property = "#EAEAEA",
-    }
-
-    local final_palettes = {
-      carbonfox = require('nightfox.lib.collect').deep_extend(
-        require('nightfox.palette').load('carbonfox'),
-        matte_black_palette
-      )
-    }
-
-    local specs = {
-      carbonfox = {
-        syntax = {
-          keyword = "red", -- "local", "function", "if"
-          conditional = "red",
-          statement = "red",
-          func = "orange",
-          string = "orange.dim",
-          number = "orange",
-          operator = "yellow",
-          variable = "white",
-          ident = "white.dim",
-          const = "white",
-          type = "white",
-          field = "white.dim",
-          comment = "comment",
-        },
-        diag = {
-            error = "red",
-            warn = "red",
-            info = "cyan",
-            hint = "magenta",
-        }
-      }
-    }
-
-    local groups = {
-      all = {
-        -- Base Groups
-        Whitespace = { fg = "palette.black.bright" },
-        NonText = { fg = "palette.black.bright" },
-        IncSearch = { bg = "palette.sel1" },
-        CursorLine = { bg = "palette.bg2" },
-        Normal = { fg = "palette.fg1" },
-
-        -- Noice Cmdline Overrides
-        NoiceCmdlinePopupBorder = { fg = "palette.fg3" },
-        NoiceCmdlinePopupTitle = { fg = "palette.fg3", style = "bold" },
-        NoiceCmdlinePopupBorderSearch = { fg = "palette.fg3" },
-        NoiceCmdlinePopupTitleSearch = { fg = "palette.fg3", style = "bold" },
-        NoiceCmdLineIcon = { fg = "palette.red" },
-
-        -- Neo-tree overrides
-        NeoTreeNormal = { bg = "palette.bg0" },
-        NeoTreeNormalNC = { link = "NeoTreeNormal" },
-        NeoTreeDirectoryName = { fg = "palette.fg3" },
-        NeoTreeDirectoryIcon = { fg = "palette.fg3" },
-        NeoTreeRootName = { fg = "palette.orange", style = "bold" },
-        NeoTreeGitAdded = { fg = "palette.green" },
-        NeoTreeGitModified = { fg = "palette.yellow" },
-        NeoTreeGitDeleted = { fg = "palette.red" },
-        NeoTreeGitIgnored = { fg = "palette.comment" },
-        NeoTreeC = { fg = "palette.orange", bg = "palette.sel0" },
-
-        -- Dashboard overrides
-        SnacksDashboardHeader = { fg = "palette.fg3" },
-        SnacksDashboardIcon = { fg = "palette.fg1" },
-        SnacksDashboardDir = { fg = "palette.orange" },
-        SnacksDashboardFile = { fg = "palette.fg3" },
-        SnacksDashboardFooter = { fg = "palette.fg3" },
-        SnacksDashboardKey = { fg = "palette.orange" },
-        SnacksDashboardDesc = { fg = "palette.fg1" },
-        SnacksDashboardSpecial = { fg = "palette.fg1" },
-
-        -- Treesitter overrides
-        ["@comment"] = { fg = "palette.comment", style = "italic" },
-        ["@keyword"] = { fg = "palette.red", style = "bold" },
-        ["@keyword.function"] = { fg = "palette.red", style = "bold" },
-        ["@keyword.operator"] = { fg = "palette.red", style = "bold" },
-        ["@function"] = { fg = "palette.orange", style = "bold" },
-        ["@function.builtin"] = { fg = "palette.orange", style = "bold" },
-        ["@function.call"] = { fg = "palette.orange" },
-        ["@string"] = { fg = "palette.orange" },
-        ["@number"] = { fg = "palette.orange" },
-        ["@operator"] = { fg = "palette.yellow" },
-        ["@variable"] = { fg = "palette.white" },
-        ["@constant"] = { fg = "palette.white" },
-        ["@type"] = { fg = "palette.white.dim" },
-        ["@variable.parameter"] = { fg = "palette.ts_parameter", style = "italic" },
-        ["@property"] = { fg = "palette.ts_property" },
-        ["@field"] = { fg = "palette.ts_property" },
-      }
-    }
-
-    nightfox.setup({
-      options = {
-        style = "carbonfox",
-        terminal_colors = true,
-        dim_inactive = true,
-        styles = { comments = "italic", functions = "bold", keywords = "bold" },
-        modules = {
-          neotree = true,
-          treesitter = true,
-        },
-      },
-      palettes = final_palettes,
-      specs = specs,
-      groups = groups
-    })
-
-    vim.cmd("colorscheme carbonfox")
-
-    -- Lualine overrides
-    local lualine_theme = {
-      normal = {
-        a = { fg = matte_black_palette.bg0, bg = matte_black_palette.lualine_normal_bg, gui = "bold" },
-        b = { fg = matte_black_palette.fg1, bg = matte_black_palette.lualine_inactive_bg },
-        c = { fg = matte_black_palette.fg2, bg = matte_black_palette.lualine_inactive_bg },
-      },
-      insert = {
-        a = { fg = matte_black_palette.bg0, bg = matte_black_palette.lualine_insert_bg, gui = "bold" },
-        b = { fg = matte_black_palette.fg1, bg = matte_black_palette.lualine_inactive_bg },
-        c = { fg = matte_black_palette.fg2, bg = matte_black_palette.lualine_inactive_bg },
-      },
-      visual = {
-        a = { fg = matte_black_palette.bg0, bg = matte_black_palette.lualine_visual_bg, gui = "bold" },
-        b = { fg = matte_black_palette.fg1, bg = matte_black_palette.lualine_inactive_bg },
-        c = { fg = matte_black_palette.fg2, bg = matte_black_palette.lualine_inactive_bg },
-      },
-      command = {
-        a = { fg = matte_black_palette.bg0, bg = matte_black_palette.lualine_command_bg, gui = "bold" },
-        b = { fg = matte_black_palette.fg1, bg = matte_black_palette.lualine_inactive_bg },
-        c = { fg = matte_black_palette.fg2, bg = matte_black_palette.lualine_inactive_bg },
-      },
-      inactive = {
-        a = { fg = matte_black_palette.fg3, bg = matte_black_palette.lualine_inactive_bg },
-        b = { fg = matte_black_palette.fg3, bg = matte_black_palette.lualine_inactive_bg },
-        c = { fg = matte_black_palette.comment, bg = matte_black_palette.lualine_inactive_bg },
-      },
-    }
-
-   require('lualine').setup({
-      options = {
-        theme = lualine_theme,
-      },
-    })
-
-  end,
-
 }

themes/matte-black/swayosd.css

@@ -1,6 +1,6 @@
 @define-color background-color #121212;
-@define-color border-color #EAEAEA;
+@define-color border-color #8A8A8D;
-@define-color label #EAEAEA;
+@define-color label #8A8A8D;
-@define-color image #EAEAEA;
+@define-color image #8A8A8D;
-@define-color progress #EAEAEA;
+@define-color progress #8A8A8D;
 

themes/nord/hyprland.conf

@@ -1,4 +1,3 @@
 general {
-    # https://wiki.hyprland.org/Configuring/Variables/#variable-types for info about colors
     col.active_border = rgb(D8DEE9)
 }

themes/rose-pine/hyprland.conf

@@ -1,4 +1,3 @@
 general {
-    # https://wiki.hyprland.org/Configuring/Variables/#variable-types for info about colors
     col.active_border = rgb(575279)
 }

themes/tokyo-night/hyprland.conf

@@ -1,5 +1,4 @@
 general {
-    # https://wiki.hyprland.org/Configuring/Variables/#variable-types for info about colors
     col.active_border = rgba(33ccffee) rgba(00ff99ee) 45deg
 }
 

themes/tokyo-night/swayosd.css

@@ -1,6 +1,6 @@
 @define-color background-color #1a1b26;
 @define-color border-color #33ccff;
-@define-color label #33ccff;
+@define-color label #a9b1d6;
-@define-color image #33ccff;
+@define-color image #a9b1d6;
-@define-color progress #33ccff;
+@define-color progress #a9b1d6;