## Summary
* Swap from Aleo to Bookerly for wider glyph support
* Swap from Space Grotesk to a small Noto Sans
## Additional Context
* 0.11.0 swapped to Aleo which has a few issues (things like Cyrillic
support for eg)
## Summary
* Redesigned home screen with big option to continue reading and
slightly nicer options to navigate to core sections
* Attempt to use the cached EPUB details (title, author) if they exist,
otherwise fall back to file name
* Adjusted button hints on home screen, removed Back option and changed
left/right to up/down
## Additional Context
* Core of this work comes from @ChandhokTannay in
1d36a86ef1
This parses the guide section in the content.opf for text/start
references and jumps to this on first open of the book.
Currently, this behavior will be repeated in case the reader manually
jumps to Chapter 0 and then re-opens the book. IMO, this is an
acceptable edge case (for which I couldn't see a good fix other than to
drag a "first open" boolean around).
---------
Co-authored-by: Sam Davis <sam@sjd.co>
Co-authored-by: Dave Allie <dave@daveallie.com>
## Summary
* Add setting for line spacing to adjust space between lines
* Aleo is already a bit tighter than Noto Sans and Open Dyslexic, so
have adjusted the values to match, this can be tweaked in the future
## Summary
* Show previous title for unnamed spines
* The spec is a little unclear, but there are plenty of cases where
chapters are split up in parts and should show the previous chapter's
title
* List TOC items instead of spine items in chapter select
* Bump `BOOK_CACHE_VERSION` to `2` to force regeneration of spine item's
TOC indexes
## Summary
* Swap to updated SDCardManager which uses SdFat
* Add exFAT support
* Swap to using FsFile everywhere
* Use newly exposed `SdMan` macro to get to static instance of
SDCardManager
* Move a bunch of FsHelpers up to SDCardManager
## Summary
- **What is the goal of this PR?** Add chapter selection support to the
XTC reader activity, including parsing chapter metadata from XTC files.
- **What changes are included?** Implemented XTC chapter parsing and
exposure in the XTC library, added a chapter selection activity for XTC,
integrated it into XtcReaderActivity, and normalized chapter page
indices by shifting them to 0-based.
## Additional Context
- The reader uses 0-based page indexing (first page = 0), but the XTC
chapter table appears to be 1-based (first page = 1), so chapter
start/end pages are shifted down by 1 during parsing.
## Summary
**What is the goal of this PR?**
Adds a setting to swap the front buttons. The default functionality are:
Back/Confirm/Left/Right. When this setting is enabled they become:
Left/Right/Back/Confirm. This makes it more comfortable to use when
holding in your right hand since your thumb can more easily rest on the
next button. The original firmware has a similar setting.
**What changes are included?**
- Add the new setting.
- Create a mapper to dynamically switch the buttons based on the
setting.
- Use mapper on the various activity screens.
- Update the button hints to reflect the swapped buttons.
## Additional Context
Full disclosure: I used Codex CLI to put this PR together, but did
review it to make sure it makes sense.
Also tested on my device:
https://share.cleanshot.com/k76891NY
## Summary
* Consolidate chapter page data into single file
* Header structure of the file stays the same, following the page count,
we now put a LUT offset
* The page data is all then appended to this file
* Finally the LUT is appended to the end of the file, and the page count
is updated
* This will also significantly improve the duration of cache cleanup
which takes a while to scan the directory and cleanup content
* Remove page file version as it's all tied up into the section file now
* Bumped section file version to 7
* Moved section content into sub directory
* Updated docs
## Additional Context
* Benchmarks:
* Generating 74 pages of content from a chapter in Jade Legacy took:
* master: 6,229ms
* this PR: 1,305ms
* Speedup of 79%
* Generating 207 pages of content from Livesuit book:
* With progress bar UI updates:
* master: 24,250ms
* this PR: 8,063ms
* Speedup of 67%
* Without progress bar UI updates:
* master: 13,055ms
* this PR: 3,600ms
* Speedup of 72%
## Summary
* **What is the goal of this PR?**
Add support for XTC (XTeink X4 native) ebook format, which contains
pre-rendered 480x800 1-bit bitmap pages optimized for e-ink displays.
* **What changes are included?**
- New `lib/Xtc/` library with XtcParser for reading XTC files
- XtcReaderActivity for displaying XTC pages on e-ink display
- XTC file detection in FileSelectionActivity
- Cover BMP generation from first XTC page
- Correct XTG page header structure (22 bytes) and bit polarity handling
## Additional Context
- XTC files contain pre-rendered bitmap pages with embedded status bar
(page numbers, progress %)
- XTG page header: 22 bytes (magic + dimensions + reserved fields +
bitmap size)
- Bit polarity: 0 = black, 1 = white
- No runtime text rendering needed - pages display directly on e-ink
- Faster page display compared to EPUB since no parsing/rendering
required
- Memory efficient: loads one page at a time (48KB per page)
- Tested with XTC files generated from https://x4converter.rho.sh/
- Verified correct page alignment and color rendering
- Please report any issues if you test with XTC files from other
sources.
---------
Co-authored-by: Dave Allie <dave@daveallie.com>
## Summary
* Use font ascender height for baseline offset
* Previously was using font height, but when rendering the font (even
from y = 0), there would be a lot of top margin
* Font would also go below the "bottom of the line" as we were using the
full font height as the baseline
## Additional Context
* This caused some text to move around, I've fixed everything I can
* Notably it moves the first line of font a little closer to the top of
the page
• What is the goal of this PR?
Implement a horizontal EPUB reading mode so books can be read in
landscape orientation (both 90° and 270°), while keeping the rest of the
UI in portrait.
• What changes are included?
◦ Rendering / Display
▪ Added an orientation model to GfxRenderer (Portrait, LandscapeNormal,
LandscapeFlipped) and made:
▪ drawPixel, drawImage, displayWindow map logical coordinates
differently depending on orientation.
▪ getScreenWidth() / getScreenHeight() return orientation‑aware logical
dimensions (480×800 in portrait, 800×480 in landscape).
◦ Settings / Configuration
▪ Extended CrossPointSettings with:
▪ landscapeReading (toggle for portrait vs. landscape EPUB reading).
▪ landscapeFlipped (toggle to flip landscape 180° so both horizontal
holding directions are supported).
▪ Updated settings serialization/deserialization to persist these fields
while remaining backward‑compatible with existing settings files.
▪ Updated SettingsActivity to expose two new toggles:
▪ “Landscape Reading”
▪ “Flip Landscape (swap top/bottom)”
◦ EPUB Reader
▪ In EpubReaderActivity:
▪ On onEnter, set GfxRenderer orientation based on the new settings
(Portrait, LandscapeNormal, or LandscapeFlipped).
▪ On onExit, reset orientation back to Portrait so Home, WiFi, Settings,
etc. continue to render as before.
▪ Adjusted renderStatusBar to position the status bar and battery
indicator relative to GfxRenderer::getScreenHeight() instead of
hard‑coded Y coordinates, so it stays correctly at the bottom in both
portrait and landscape.
◦ EPUB Caching / Layout
▪ Extended Section cache metadata (section.bin) to include the logical
screenWidth and screenHeight used when pages were generated; bumped
SECTION_FILE_VERSION.
▪ Updated loadCacheMetadata to compare:
▪ font/margins/line compression/extraParagraphSpacing and screen
dimensions; mismatches now invalidate and clear the cache.
▪ Updated persistPageDataToSD and all call sites in EpubReaderActivity
to pass the current GfxRenderer::getScreenWidth() / getScreenHeight() so
portrait and landscape caches are kept separate and correctly sized.
Additional Context
• Cache behavior / migration
◦ Existing section.bin files (old SECTION_FILE_VERSION) will be detected
as incompatible and their caches cleared and rebuilt once per chapter
when first opened after this change.
◦ Within a given orientation, caches will be reused as before. Switching
orientation (portrait ↔ landscape) will cause a one‑time re‑index of
each chapter in the new orientation.
• Scope and risks
◦ Orientation changes are scoped to the EPUB reader; the Home screen,
Settings, WiFi selection, sleep screens, and web server UI continue to
assume portrait orientation.
◦ The renderer’s orientation is a static/global setting; if future code
uses GfxRenderer outside the reader while a reader instance is active,
it should be aware that orientation is no longer implicitly fixed.
◦ All drawing primitives now go through orientation‑aware coordinate
transforms; any code that previously relied on edge‑case behavior or
out‑of‑bounds writes might surface as logged “Outside range” warnings
instead.
• Testing suggestions / areas to focus on
◦ Verify in hardware:
▪ Portrait mode still renders correctly (boot, home, settings, WiFi,
reader).
▪ Landscape reading in both directions:
▪ Landscape Reading = ON, Flip Landscape = OFF.
▪ Landscape Reading = ON, Flip Landscape = ON.
▪ Status bar (page X/Y, % progress, battery icon) is fully visible and
aligned at the bottom in all three combinations.
◦ Open the same book:
▪ In portrait first, then switch to landscape and reopen it.
▪ Confirm that:
▪ Old portrait caches are rebuilt once for landscape (you should see the
“Indexing…” page).
▪ Progress save/restore still works (resume opens to the correct page in
the current orientation).
◦ Ensure grayscale rendering (the secondary pass in
EpubReaderActivity::renderContents) still looks correct in both
orientations.
---------
Co-authored-by: Dave Allie <dave@daveallie.com>
## Summary
* Fix underscore on keyboard
* Remove special handling of special row characters
* Fix navigating between special row items
* Standardize keyboard activity to use standard loop
* Fix issue with rendering keyboard non-stop
Fixes https://github.com/daveallie/crosspoint-reader/issues/131
## Summary
* **What is the goal of this PR?**
Improve reliability and user experience during chapter indexing by
adding retry logic for SD card operations and a visual progress bar.
* **What changes are included?**
- **Retry logic**: Add 3 retry attempts with 50ms delay for ZIP to SD
card streaming to handle timing issues after display refresh
- **Progress bar**: Display a visual progress bar (0-100%) during
chapter indexing based on file read progress, updating every 10% to
balance responsiveness with e-ink display limitations
## Additional Context
* **Problem observed**: When navigating quickly through books with many
chapters (before chapter titles finish rendering), the "Indexing..."
screen would appear frozen. Checking the serial log revealed the
operation had silently failed, but the UI showed no indication of this.
Users would likely assume the device had crashed. Pressing the next
button again would resume operation, but this behavior was confusing and
unexpected.
* **Solution**:
- Retry logic handles transient SD card timing failures automatically,
so users don't need to manually retry
- Progress bar provides visual feedback so users know indexing is
actively working (not frozen)
* **Why timing issues occur**: After display refresh operations, there
can be timing conflicts when immediately starting SD card write
operations. This is more likely to happen when rapidly navigating
through chapters.
* **Progress bar design**: Updates every 10% to avoid excessive e-ink
refreshes while still providing meaningful feedback during long indexing
operations (especially for large chapters with CJK characters).
* **Performance**: Minimal overhead - progress calculation is simple
byte counting, and display updates use `FAST_REFRESH` mode.
Add setting toggle that allows status bar display options in EpubReader.
Supported options would be as follows:
- FULL: display as is today
- PROGRESS: display progress bar only
- BATTERY: display battery only
- NONE: hide status bar
---------
Co-authored-by: Dave Allie <dave@daveallie.com>
## Summary
In using my build of
https://github.com/daveallie/crosspoint-reader/pull/130 I realized that
we need a "open" button hint above the second button in the File browser
## Additional Context
* Add any other information that might be helpful for the reviewer
(e.g., performance implications, potential risks, specific areas to
focus on).
Using QRCode library from pio to generate the QR code.
Done:
- Display QR code for URL in network mode
- minor fixes of layout
- Display QR for URL in AP mode
- Display QR for AP in AP mode
---------
Co-authored-by: Dave Allie <dave@daveallie.com>
## Summary
* **What is the goal of this PR?**
Add a "Continue Reading" feature to improve user experience when
returning to a previously opened book.
* **What changes are included?**
- Add dynamic "Continue: <book name>" menu item in Home screen when a
book was previously opened
- File browser now starts from the folder of the last opened book
instead of always starting from root directory
- Menu dynamically shows 3 or 4 items based on reading history:
- Without history: `Browse`, `File transfer`, `Settings`
- With history: `Continue: <book>`, `Browse`, `File transfer`,
`Settings`
## Additional Context
* This feature leverages the existing `APP_STATE.openEpubPath` which
already persists the last opened book path
* The Continue Reading menu only appears if the book file still exists
on the SD card
* Book name in the menu is truncated to 25 characters with "..." suffix
if too long
* If the last book's folder was deleted, the file browser gracefully
falls back to root directory
* No new dependencies or significant memory overhead - reuses existing
state management
## Summary
This creates a `renderer.drawButtonHints` to make all of the "hints"
over buttons to match the home screen.
## Additional Context
* Add any other information that might be helpful for the reviewer
(e.g., performance implications, potential risks, specific areas to
focus on).
---------
Co-authored-by: Dave Allie <dave@daveallie.com>
## Summary
* Use single unified cache file for book spine, table of contents, and
core metadata (title, author, cover image)
* Use new temp item store file in OPF parsing to store items to be
rescaned when parsing spine
* This avoids us holding these items in memory
* Use new toc.bin.tmp and spine.bin.tmp to build out partial toc / spine
data as part of parsing content.opf and the NCX file
* These files are re-read multiple times to ultimately build book.bin
## Additional Context
* Spec for file format included below as an image
* This should help with:
* #10
* #60
* #99
## Summary
* **What is the goal of this PR?** Adds WiFi Access Point (AP) mode
support for File Transfer, allowing the device to create its own WiFi
network that users can connect to directly - useful when no existing
WiFi network is available. And in my experience is faster when the
device is right next to your laptop (but maybe further from your wifi)
* **What changes are included?**
- New `NetworkModeSelectionActivity` - an interstitial screen asking
users to choose between:
- "Join a Network" - connects to an existing WiFi network (existing
behavior)
- "Create Hotspot" - creates a WiFi access point named
"CrossPoint-Reader"
- Modified `CrossPointWebServerActivity` to:
- Launch the network mode selection screen before proceeding
- Support starting an Access Point with mDNS (`crosspoint.local`) and
DNS server for captive portal behavior
- Display appropriate connection info for both modes
- Modified `CrossPointWebServer` to support starting when WiFi is in AP
mode (not just STA connected mode)
## Additional Context
* **AP Mode Details**: The device creates an open WiFi network named
"CrossPoint-Reader". Once connected, users can access the file transfer
page at `http://crosspoint.local/` or `http://192.168.4.1/`
* **DNS Captive Portal**: A DNS server redirects all domain requests to
the device's IP, enabling captive portal behavior on some devices
* **mDNS**: Hostname resolution via `crosspoint.local` is enabled for
both AP and STA modes
* **No breaking changes**: The "Join a Network" option preserves the
existing WiFi connection flow
* **Memory impact**: Minimal - the AP mode uses roughly the same
resources as STA mode
## Summary
* Adds support for OTA
* Gets latest firmware bin from latest GitHub release
* I have noticed it be a little flaky unpacking the JSON and
occasionally failing to start
## Summary
* Give activities name and log when entering and exiting them
* Clearer logs when attempting to debug, knowing where users are coming
from/going to helps
## Summary
* Unset openEpubPath on boot and set once epub fully loaded
## Additional Context
* If an epub was crashing when loading, it was possible to get the
device stuck into a loop. There was no way to get back to the home
screen as we'd always load you back into old epub
* Break this loop by clearing the stored value when we boot, still
jumping to the last open epub, but only resetting that value once the
epub has been fully loaded
## Summary
* Paginate book list
* Avoid out of bounds rendering of long book titles, truncate with
ellipsis instead
## Additional Context
* Should partially help with
https://github.com/daveallie/crosspoint-reader/issues/75 as it was
previously rendering a lot of content off screen, will need to test with
a large directory
## Summary
- **What is the goal of this PR?**
Implements wireless EPUB file management via a built-in web server,
enabling users to upload, browse, organize, and delete EPUB files from
any device on the same WiFi network without needing a computer cable
connection.
- **What changes are included?**
- **New Web Server**
([`CrossPointWebServer.cpp`](src/CrossPointWebServer.cpp),
[`CrossPointWebServer.h`](src/CrossPointWebServer.h)):
- HTTP server on port 80 with a responsive HTML/CSS interface
- Home page showing device status (version, IP, free memory)
- File Manager with folder navigation and breadcrumb support
- EPUB file upload with progress tracking
- Folder creation and file/folder deletion
- XSS protection via HTML escaping
- Hidden system folders (`.` prefixed, "System Volume Information",
"XTCache")
- **WiFi Screen** ([`WifiScreen.cpp`](src/screens/WifiScreen.cpp),
[`WifiScreen.h`](src/screens/WifiScreen.h)):
- Network scanning with signal strength indicators
- Visual indicators for encrypted (`*`) and saved (`+`) networks
- State machine managing: scanning, network selection, password entry,
connecting, save/forget prompts
- 15-second connection timeout handling
- Integration with web server (starts on connect, stops on exit)
- **WiFi Credential Storage**
([`WifiCredentialStore.cpp`](src/WifiCredentialStore.cpp),
[`WifiCredentialStore.h`](src/WifiCredentialStore.h)):
- Persistent storage in `/sd/.crosspoint/wifi.bin`
- XOR obfuscation for stored passwords (basic protection against casual
reading)
- Up to 8 saved networks with add/remove/update operations
- **On-Screen Keyboard**
([`OnScreenKeyboard.cpp`](src/screens/OnScreenKeyboard.cpp),
[`OnScreenKeyboard.h`](src/screens/OnScreenKeyboard.h)):
- Reusable QWERTY keyboard component with shift support
- Special keys: Shift, Space, Backspace, Done
- Support for password masking mode
- **Settings Screen Integration**
([`SettingsScreen.h`](src/screens/SettingsScreen.h)):
- Added WiFi action to navigate to the new WiFi screen
- **Documentation** ([`docs/webserver.md`](docs/webserver.md)):
- Comprehensive user guide covering WiFi setup, web interface usage,
file management, troubleshooting, and security notes
- See this for more screenshots!
- Working "displays the right way in GitHub" on my repo:
https://github.com/olearycrew/crosspoint-reader/blob/feature/connect-to-wifi/docs/webserver.md
**Video demo**
https://github.com/user-attachments/assets/283e32dc-2d9f-4ae2-848e-01f41166a731
## Additional Context
- **Security considerations**: The web server has no
authentication—anyone on the same WiFi network can access files. This is
documented as a limitation, recommending use only on trusted private
networks. Password obfuscation in the credential store is XOR-based, not
cryptographically secure.
- **Memory implications**: The web server and WiFi stack consume
significant memory. The implementation properly cleans up (stops server,
disconnects WiFi, sets `WIFI_OFF` mode) when exiting the WiFi screen to
free resources.
- **Async operations**: Network scanning and connection use async
patterns with FreeRTOS tasks to prevent blocking the UI. The display
task handles rendering on a dedicated thread with mutex protection.
- **Browser compatibility**: The web interface uses standard
HTML5/CSS3/JavaScript and is tested to work with all modern browsers on
desktop and mobile.
---------
Co-authored-by: Dave Allie <dave@daveallie.com>
Adresses #53
Please check if we still need the code to "Give the user up to 1000ms to
start holding the power button, and must hold for
SETTINGS.getPowerButtonDuration()" - the power button should be pressed
already when waking up...
Also, decided to return before the delay to wait more to make the
behavior more immediate.
---------
Co-authored-by: Dave Allie <dave@daveallie.com>
## Problem
Reading progress.bin used `SD.exists()` then `SD.open()` without
checking if open succeeded. Race conditions or SD errors could cause
file handle to be invalid.
## Fix
- Removed redundant `SD.exists()` check
- Check if file opened successfully before reading
- Verify correct number of bytes were read
## Testing
- Builds successfully with `pio run`
- Affects: `src/activities/reader/EpubReaderActivity.cpp`
