crosspoint-reader/src/main.cpp

#include <Arduino.h>
#include <EInkDisplay.h>
#include <Epub.h>
#include <GfxRenderer.h>
#include <InputManager.h>
#include <SD.h>
#include <SPI.h>
#include <builtinFonts/bookerly_2b.h>
#include <builtinFonts/bookerly_bold_2b.h>
#include <builtinFonts/bookerly_bold_italic_2b.h>
#include <builtinFonts/bookerly_italic_2b.h>
#include <builtinFonts/pixelarial14.h>
#include <builtinFonts/ubuntu_10.h>
#include <builtinFonts/ubuntu_bold_10.h>

#include "Battery.h"
#include "CrossPointSettings.h"
#include "CrossPointState.h"
#include "activities/boot_sleep/BootActivity.h"
#include "activities/boot_sleep/SleepActivity.h"
#include "activities/home/HomeActivity.h"
#include "activities/network/CrossPointWebServerActivity.h"
#include "activities/reader/ReaderActivity.h"
#include "activities/settings/SettingsActivity.h"
#include "activities/util/FullScreenMessageActivity.h"
#include "config.h"

#define SPI_FQ 40000000
// Display SPI pins (custom pins for XteinkX4, not hardware SPI defaults)
#define EPD_SCLK 8   // SPI Clock
#define EPD_MOSI 10  // SPI MOSI (Master Out Slave In)
#define EPD_CS 21    // Chip Select
#define EPD_DC 4     // Data/Command
#define EPD_RST 5    // Reset
#define EPD_BUSY 6   // Busy

#define UART0_RXD 20  // Used for USB connection detection

#define SD_SPI_CS 12
#define SD_SPI_MISO 7

EInkDisplay einkDisplay(EPD_SCLK, EPD_MOSI, EPD_CS, EPD_DC, EPD_RST, EPD_BUSY);
InputManager inputManager;
GfxRenderer renderer(einkDisplay);
Activity* currentActivity;

// Fonts
EpdFont bookerlyFont(&bookerly_2b);
EpdFont bookerlyBoldFont(&bookerly_bold_2b);
EpdFont bookerlyItalicFont(&bookerly_italic_2b);
EpdFont bookerlyBoldItalicFont(&bookerly_bold_italic_2b);
EpdFontFamily bookerlyFontFamily(&bookerlyFont, &bookerlyBoldFont, &bookerlyItalicFont, &bookerlyBoldItalicFont);

EpdFont smallFont(&pixelarial14);
EpdFontFamily smallFontFamily(&smallFont);

EpdFont ubuntu10Font(&ubuntu_10);
EpdFont ubuntuBold10Font(&ubuntu_bold_10);
EpdFontFamily ubuntuFontFamily(&ubuntu10Font, &ubuntuBold10Font);

// Auto-sleep timeout (10 minutes of inactivity)
constexpr unsigned long AUTO_SLEEP_TIMEOUT_MS = 10 * 60 * 1000;
// measurement of power button press duration calibration value
unsigned long t1 = 0;
unsigned long t2 = 0;

void exitActivity() {
  if (currentActivity) {
    currentActivity->onExit();
    delete currentActivity;
    currentActivity = nullptr;
  }
}

void enterNewActivity(Activity* activity) {
  currentActivity = activity;
  currentActivity->onEnter();
}

// Verify long press on wake-up from deep sleep
void verifyWakeupLongPress() {
  // Give the user up to 1000ms to start holding the power button, and must hold for SETTINGS.getPowerButtonDuration()
  const auto start = millis();
  bool abort = false;
  // It takes us some time to wake up from deep sleep, so we need to subtract that from the duration
  uint16_t calibration = 25;
  uint16_t calibratedPressDuration =
      (calibration < SETTINGS.getPowerButtonDuration()) ? SETTINGS.getPowerButtonDuration() - calibration : 1;

  inputManager.update();
  // Verify the user has actually pressed
  while (!inputManager.isPressed(InputManager::BTN_POWER) && millis() - start < 1000) {
    delay(10);  // only wait 10ms each iteration to not delay too much in case of short configured duration.
    inputManager.update();
  }

  t2 = millis();
  if (inputManager.isPressed(InputManager::BTN_POWER)) {
    do {
      delay(10);
      inputManager.update();
    } while (inputManager.isPressed(InputManager::BTN_POWER) && inputManager.getHeldTime() < calibratedPressDuration);
    abort = inputManager.getHeldTime() < calibratedPressDuration;
  } else {
    abort = true;
  }

  if (abort) {
    // Button released too early. Returning to sleep.
    // IMPORTANT: Re-arm the wakeup trigger before sleeping again
    esp_deep_sleep_enable_gpio_wakeup(1ULL << InputManager::POWER_BUTTON_PIN, ESP_GPIO_WAKEUP_GPIO_LOW);
    esp_deep_sleep_start();
  }
}

void waitForPowerRelease() {
  inputManager.update();
  while (inputManager.isPressed(InputManager::BTN_POWER)) {
    delay(50);
    inputManager.update();
  }
}

// Enter deep sleep mode
void enterDeepSleep() {
  exitActivity();
  enterNewActivity(new SleepActivity(renderer, inputManager));

  einkDisplay.deepSleep();
  Serial.printf("[%lu] [   ] Power button press calibration value: %lu ms\n", millis(), t2 - t1);
  Serial.printf("[%lu] [   ] Entering deep sleep.\n", millis());
  esp_deep_sleep_enable_gpio_wakeup(1ULL << InputManager::POWER_BUTTON_PIN, ESP_GPIO_WAKEUP_GPIO_LOW);
  // Ensure that the power button has been released to avoid immediately turning back on if you're holding it
  waitForPowerRelease();
  // Enter Deep Sleep
  esp_deep_sleep_start();
}

void onGoHome();
void onGoToReader(const std::string& initialEpubPath) {
  exitActivity();
  enterNewActivity(new ReaderActivity(renderer, inputManager, initialEpubPath, onGoHome));
}
void onGoToReaderHome() { onGoToReader(std::string()); }

void onGoToFileTransfer() {
  exitActivity();
  enterNewActivity(new CrossPointWebServerActivity(renderer, inputManager, onGoHome));
}

void onGoToSettings() {
  exitActivity();
  enterNewActivity(new SettingsActivity(renderer, inputManager, onGoHome));
}

void onGoHome() {
  exitActivity();
  enterNewActivity(new HomeActivity(renderer, inputManager, onGoToReaderHome, onGoToSettings, onGoToFileTransfer));
}

void setupDisplayAndFonts() {
  einkDisplay.begin();
  Serial.printf("[%lu] [   ] Display initialized\n", millis());
  renderer.insertFont(READER_FONT_ID, bookerlyFontFamily);
  renderer.insertFont(UI_FONT_ID, ubuntuFontFamily);
  renderer.insertFont(SMALL_FONT_ID, smallFontFamily);
  Serial.printf("[%lu] [   ] Fonts setup\n", millis());
}

void setup() {
  t1 = millis();

  // Only start serial if USB connected
  pinMode(UART0_RXD, INPUT);
  if (digitalRead(UART0_RXD) == HIGH) {
    Serial.begin(115200);
  }

  Serial.printf("[%lu] [   ] Starting CrossPoint version " CROSSPOINT_VERSION "\n", millis());

  inputManager.begin();
  // Initialize pins
  pinMode(BAT_GPIO0, INPUT);

  // Initialize SPI with custom pins
  SPI.begin(EPD_SCLK, SD_SPI_MISO, EPD_MOSI, EPD_CS);

  // SD Card Initialization
  // We need 6 open files concurrently when parsing a new chapter
  if (!SD.begin(SD_SPI_CS, SPI, SPI_FQ, "/sd", 6)) {
    Serial.printf("[%lu] [   ] SD card initialization failed\n", millis());
    setupDisplayAndFonts();
    exitActivity();
    enterNewActivity(new FullScreenMessageActivity(renderer, inputManager, "SD card error", BOLD));
    return;
  }

  SETTINGS.loadFromFile();

  // verify power button press duration after we've read settings.
  verifyWakeupLongPress();

  setupDisplayAndFonts();

  exitActivity();
  enterNewActivity(new BootActivity(renderer, inputManager));

  APP_STATE.loadFromFile();
  if (APP_STATE.openEpubPath.empty()) {
    onGoHome();
  } else {
    // Clear app state to avoid getting into a boot loop if the epub doesn't load
    const auto path = APP_STATE.openEpubPath;
    APP_STATE.openEpubPath = "";
    APP_STATE.saveToFile();
    onGoToReader(path);
  }

  // Ensure we're not still holding the power button before leaving setup
  waitForPowerRelease();
}

void loop() {
  static unsigned long maxLoopDuration = 0;
  const unsigned long loopStartTime = millis();
  static unsigned long lastMemPrint = 0;

  inputManager.update();

  if (Serial && millis() - lastMemPrint >= 10000) {
    Serial.printf("[%lu] [MEM] Free: %d bytes, Total: %d bytes, Min Free: %d bytes\n", millis(), ESP.getFreeHeap(),
                  ESP.getHeapSize(), ESP.getMinFreeHeap());
    lastMemPrint = millis();
  }

  // Check for any user activity (button press or release)
  static unsigned long lastActivityTime = millis();
  if (inputManager.wasAnyPressed() || inputManager.wasAnyReleased()) {
    lastActivityTime = millis();  // Reset inactivity timer
  }

  if (millis() - lastActivityTime >= AUTO_SLEEP_TIMEOUT_MS) {
    Serial.printf("[%lu] [SLP] Auto-sleep triggered after %lu ms of inactivity\n", millis(), AUTO_SLEEP_TIMEOUT_MS);
    enterDeepSleep();
    // This should never be hit as `enterDeepSleep` calls esp_deep_sleep_start
    return;
  }

  if (inputManager.isPressed(InputManager::BTN_POWER) &&
      inputManager.getHeldTime() > SETTINGS.getPowerButtonDuration()) {
    enterDeepSleep();
    // This should never be hit as `enterDeepSleep` calls esp_deep_sleep_start
    return;
  }

  const unsigned long activityStartTime = millis();
  if (currentActivity) {
    currentActivity->loop();
  }
  const unsigned long activityDuration = millis() - activityStartTime;

  const unsigned long loopDuration = millis() - loopStartTime;
  if (loopDuration > maxLoopDuration) {
    maxLoopDuration = loopDuration;
    if (maxLoopDuration > 50) {
      Serial.printf("[%lu] [LOOP] New max loop duration: %lu ms (activity: %lu ms)\n", millis(), maxLoopDuration,
                    activityDuration);
    }
  }

  // Add delay at the end of the loop to prevent tight spinning
  // When an activity requests skip loop delay (e.g., webserver running), use yield() for faster response
  // Otherwise, use longer delay to save power
  if (currentActivity && currentActivity->skipLoopDelay()) {
    yield();  // Give FreeRTOS a chance to run tasks, but return immediately
  } else {
    delay(10);  // Normal delay when no activity requires fast response
  }
}