2025-12-17 23:32:18 +11:00
|
|
|
#include "EpubReaderChapterSelectionActivity.h"
|
2025-12-13 21:17:34 +11:00
|
|
|
|
|
|
|
|
#include <GfxRenderer.h>
|
2025-12-22 00:31:25 +11:00
|
|
|
#include <InputManager.h>
|
2025-12-13 21:17:34 +11:00
|
|
|
#include <SD.h>
|
|
|
|
|
|
|
|
|
|
#include "config.h"
|
|
|
|
|
|
2025-12-21 17:12:53 +11:00
|
|
|
namespace {
|
Rotation Support (#77)
• What is the goal of this PR?
Implement a horizontal EPUB reading mode so books can be read in
landscape orientation (both 90° and 270°), while keeping the rest of the
UI in portrait.
• What changes are included?
◦ Rendering / Display
▪ Added an orientation model to GfxRenderer (Portrait, LandscapeNormal,
LandscapeFlipped) and made:
▪ drawPixel, drawImage, displayWindow map logical coordinates
differently depending on orientation.
▪ getScreenWidth() / getScreenHeight() return orientation‑aware logical
dimensions (480×800 in portrait, 800×480 in landscape).
◦ Settings / Configuration
▪ Extended CrossPointSettings with:
▪ landscapeReading (toggle for portrait vs. landscape EPUB reading).
▪ landscapeFlipped (toggle to flip landscape 180° so both horizontal
holding directions are supported).
▪ Updated settings serialization/deserialization to persist these fields
while remaining backward‑compatible with existing settings files.
▪ Updated SettingsActivity to expose two new toggles:
▪ “Landscape Reading”
▪ “Flip Landscape (swap top/bottom)”
◦ EPUB Reader
▪ In EpubReaderActivity:
▪ On onEnter, set GfxRenderer orientation based on the new settings
(Portrait, LandscapeNormal, or LandscapeFlipped).
▪ On onExit, reset orientation back to Portrait so Home, WiFi, Settings,
etc. continue to render as before.
▪ Adjusted renderStatusBar to position the status bar and battery
indicator relative to GfxRenderer::getScreenHeight() instead of
hard‑coded Y coordinates, so it stays correctly at the bottom in both
portrait and landscape.
◦ EPUB Caching / Layout
▪ Extended Section cache metadata (section.bin) to include the logical
screenWidth and screenHeight used when pages were generated; bumped
SECTION_FILE_VERSION.
▪ Updated loadCacheMetadata to compare:
▪ font/margins/line compression/extraParagraphSpacing and screen
dimensions; mismatches now invalidate and clear the cache.
▪ Updated persistPageDataToSD and all call sites in EpubReaderActivity
to pass the current GfxRenderer::getScreenWidth() / getScreenHeight() so
portrait and landscape caches are kept separate and correctly sized.
Additional Context
• Cache behavior / migration
◦ Existing section.bin files (old SECTION_FILE_VERSION) will be detected
as incompatible and their caches cleared and rebuilt once per chapter
when first opened after this change.
◦ Within a given orientation, caches will be reused as before. Switching
orientation (portrait ↔ landscape) will cause a one‑time re‑index of
each chapter in the new orientation.
• Scope and risks
◦ Orientation changes are scoped to the EPUB reader; the Home screen,
Settings, WiFi selection, sleep screens, and web server UI continue to
assume portrait orientation.
◦ The renderer’s orientation is a static/global setting; if future code
uses GfxRenderer outside the reader while a reader instance is active,
it should be aware that orientation is no longer implicitly fixed.
◦ All drawing primitives now go through orientation‑aware coordinate
transforms; any code that previously relied on edge‑case behavior or
out‑of‑bounds writes might surface as logged “Outside range” warnings
instead.
• Testing suggestions / areas to focus on
◦ Verify in hardware:
▪ Portrait mode still renders correctly (boot, home, settings, WiFi,
reader).
▪ Landscape reading in both directions:
▪ Landscape Reading = ON, Flip Landscape = OFF.
▪ Landscape Reading = ON, Flip Landscape = ON.
▪ Status bar (page X/Y, % progress, battery icon) is fully visible and
aligned at the bottom in all three combinations.
◦ Open the same book:
▪ In portrait first, then switch to landscape and reopen it.
▪ Confirm that:
▪ Old portrait caches are rebuilt once for landscape (you should see the
“Indexing…” page).
▪ Progress save/restore still works (resume opens to the correct page in
the current orientation).
◦ Ensure grayscale rendering (the secondary pass in
EpubReaderActivity::renderContents) still looks correct in both
orientations.
---------
Co-authored-by: Dave Allie <dave@daveallie.com>
2025-12-28 05:33:20 -05:00
|
|
|
// Time threshold for treating a long press as a page-up/page-down
|
2025-12-13 21:17:34 +11:00
|
|
|
constexpr int SKIP_PAGE_MS = 700;
|
2025-12-21 17:12:53 +11:00
|
|
|
} // namespace
|
2025-12-13 21:17:34 +11:00
|
|
|
|
Rotation Support (#77)
• What is the goal of this PR?
Implement a horizontal EPUB reading mode so books can be read in
landscape orientation (both 90° and 270°), while keeping the rest of the
UI in portrait.
• What changes are included?
◦ Rendering / Display
▪ Added an orientation model to GfxRenderer (Portrait, LandscapeNormal,
LandscapeFlipped) and made:
▪ drawPixel, drawImage, displayWindow map logical coordinates
differently depending on orientation.
▪ getScreenWidth() / getScreenHeight() return orientation‑aware logical
dimensions (480×800 in portrait, 800×480 in landscape).
◦ Settings / Configuration
▪ Extended CrossPointSettings with:
▪ landscapeReading (toggle for portrait vs. landscape EPUB reading).
▪ landscapeFlipped (toggle to flip landscape 180° so both horizontal
holding directions are supported).
▪ Updated settings serialization/deserialization to persist these fields
while remaining backward‑compatible with existing settings files.
▪ Updated SettingsActivity to expose two new toggles:
▪ “Landscape Reading”
▪ “Flip Landscape (swap top/bottom)”
◦ EPUB Reader
▪ In EpubReaderActivity:
▪ On onEnter, set GfxRenderer orientation based on the new settings
(Portrait, LandscapeNormal, or LandscapeFlipped).
▪ On onExit, reset orientation back to Portrait so Home, WiFi, Settings,
etc. continue to render as before.
▪ Adjusted renderStatusBar to position the status bar and battery
indicator relative to GfxRenderer::getScreenHeight() instead of
hard‑coded Y coordinates, so it stays correctly at the bottom in both
portrait and landscape.
◦ EPUB Caching / Layout
▪ Extended Section cache metadata (section.bin) to include the logical
screenWidth and screenHeight used when pages were generated; bumped
SECTION_FILE_VERSION.
▪ Updated loadCacheMetadata to compare:
▪ font/margins/line compression/extraParagraphSpacing and screen
dimensions; mismatches now invalidate and clear the cache.
▪ Updated persistPageDataToSD and all call sites in EpubReaderActivity
to pass the current GfxRenderer::getScreenWidth() / getScreenHeight() so
portrait and landscape caches are kept separate and correctly sized.
Additional Context
• Cache behavior / migration
◦ Existing section.bin files (old SECTION_FILE_VERSION) will be detected
as incompatible and their caches cleared and rebuilt once per chapter
when first opened after this change.
◦ Within a given orientation, caches will be reused as before. Switching
orientation (portrait ↔ landscape) will cause a one‑time re‑index of
each chapter in the new orientation.
• Scope and risks
◦ Orientation changes are scoped to the EPUB reader; the Home screen,
Settings, WiFi selection, sleep screens, and web server UI continue to
assume portrait orientation.
◦ The renderer’s orientation is a static/global setting; if future code
uses GfxRenderer outside the reader while a reader instance is active,
it should be aware that orientation is no longer implicitly fixed.
◦ All drawing primitives now go through orientation‑aware coordinate
transforms; any code that previously relied on edge‑case behavior or
out‑of‑bounds writes might surface as logged “Outside range” warnings
instead.
• Testing suggestions / areas to focus on
◦ Verify in hardware:
▪ Portrait mode still renders correctly (boot, home, settings, WiFi,
reader).
▪ Landscape reading in both directions:
▪ Landscape Reading = ON, Flip Landscape = OFF.
▪ Landscape Reading = ON, Flip Landscape = ON.
▪ Status bar (page X/Y, % progress, battery icon) is fully visible and
aligned at the bottom in all three combinations.
◦ Open the same book:
▪ In portrait first, then switch to landscape and reopen it.
▪ Confirm that:
▪ Old portrait caches are rebuilt once for landscape (you should see the
“Indexing…” page).
▪ Progress save/restore still works (resume opens to the correct page in
the current orientation).
◦ Ensure grayscale rendering (the secondary pass in
EpubReaderActivity::renderContents) still looks correct in both
orientations.
---------
Co-authored-by: Dave Allie <dave@daveallie.com>
2025-12-28 05:33:20 -05:00
|
|
|
int EpubReaderChapterSelectionActivity::getPageItems() const {
|
|
|
|
|
// Layout constants used in renderScreen
|
|
|
|
|
constexpr int startY = 60;
|
|
|
|
|
constexpr int lineHeight = 30;
|
|
|
|
|
|
|
|
|
|
const int screenHeight = renderer.getScreenHeight();
|
|
|
|
|
const int availableHeight = screenHeight - startY;
|
|
|
|
|
int items = availableHeight / lineHeight;
|
|
|
|
|
|
|
|
|
|
// Ensure we always have at least one item per page to avoid division by zero
|
|
|
|
|
if (items < 1) {
|
|
|
|
|
items = 1;
|
|
|
|
|
}
|
|
|
|
|
return items;
|
|
|
|
|
}
|
|
|
|
|
|
2025-12-17 23:32:18 +11:00
|
|
|
void EpubReaderChapterSelectionActivity::taskTrampoline(void* param) {
|
|
|
|
|
auto* self = static_cast<EpubReaderChapterSelectionActivity*>(param);
|
2025-12-13 21:17:34 +11:00
|
|
|
self->displayTaskLoop();
|
|
|
|
|
}
|
|
|
|
|
|
2025-12-17 23:32:18 +11:00
|
|
|
void EpubReaderChapterSelectionActivity::onEnter() {
|
2025-12-21 21:17:00 +11:00
|
|
|
Activity::onEnter();
|
|
|
|
|
|
2025-12-13 21:17:34 +11:00
|
|
|
if (!epub) {
|
|
|
|
|
return;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
renderingMutex = xSemaphoreCreateMutex();
|
|
|
|
|
selectorIndex = currentSpineIndex;
|
|
|
|
|
|
|
|
|
|
// Trigger first update
|
|
|
|
|
updateRequired = true;
|
2025-12-17 23:32:18 +11:00
|
|
|
xTaskCreate(&EpubReaderChapterSelectionActivity::taskTrampoline, "EpubReaderChapterSelectionActivityTask",
|
2025-12-24 22:36:13 +11:00
|
|
|
4096, // Stack size
|
2025-12-13 21:17:34 +11:00
|
|
|
this, // Parameters
|
|
|
|
|
1, // Priority
|
|
|
|
|
&displayTaskHandle // Task handle
|
|
|
|
|
);
|
|
|
|
|
}
|
|
|
|
|
|
2025-12-17 23:32:18 +11:00
|
|
|
void EpubReaderChapterSelectionActivity::onExit() {
|
2025-12-21 21:17:00 +11:00
|
|
|
Activity::onExit();
|
|
|
|
|
|
2025-12-13 21:17:34 +11:00
|
|
|
// Wait until not rendering to delete task to avoid killing mid-instruction to EPD
|
|
|
|
|
xSemaphoreTake(renderingMutex, portMAX_DELAY);
|
|
|
|
|
if (displayTaskHandle) {
|
|
|
|
|
vTaskDelete(displayTaskHandle);
|
|
|
|
|
displayTaskHandle = nullptr;
|
|
|
|
|
}
|
|
|
|
|
vSemaphoreDelete(renderingMutex);
|
|
|
|
|
renderingMutex = nullptr;
|
|
|
|
|
}
|
|
|
|
|
|
2025-12-17 23:32:18 +11:00
|
|
|
void EpubReaderChapterSelectionActivity::loop() {
|
2025-12-13 21:17:34 +11:00
|
|
|
const bool prevReleased =
|
|
|
|
|
inputManager.wasReleased(InputManager::BTN_UP) || inputManager.wasReleased(InputManager::BTN_LEFT);
|
|
|
|
|
const bool nextReleased =
|
|
|
|
|
inputManager.wasReleased(InputManager::BTN_DOWN) || inputManager.wasReleased(InputManager::BTN_RIGHT);
|
|
|
|
|
|
|
|
|
|
const bool skipPage = inputManager.getHeldTime() > SKIP_PAGE_MS;
|
Rotation Support (#77)
• What is the goal of this PR?
Implement a horizontal EPUB reading mode so books can be read in
landscape orientation (both 90° and 270°), while keeping the rest of the
UI in portrait.
• What changes are included?
◦ Rendering / Display
▪ Added an orientation model to GfxRenderer (Portrait, LandscapeNormal,
LandscapeFlipped) and made:
▪ drawPixel, drawImage, displayWindow map logical coordinates
differently depending on orientation.
▪ getScreenWidth() / getScreenHeight() return orientation‑aware logical
dimensions (480×800 in portrait, 800×480 in landscape).
◦ Settings / Configuration
▪ Extended CrossPointSettings with:
▪ landscapeReading (toggle for portrait vs. landscape EPUB reading).
▪ landscapeFlipped (toggle to flip landscape 180° so both horizontal
holding directions are supported).
▪ Updated settings serialization/deserialization to persist these fields
while remaining backward‑compatible with existing settings files.
▪ Updated SettingsActivity to expose two new toggles:
▪ “Landscape Reading”
▪ “Flip Landscape (swap top/bottom)”
◦ EPUB Reader
▪ In EpubReaderActivity:
▪ On onEnter, set GfxRenderer orientation based on the new settings
(Portrait, LandscapeNormal, or LandscapeFlipped).
▪ On onExit, reset orientation back to Portrait so Home, WiFi, Settings,
etc. continue to render as before.
▪ Adjusted renderStatusBar to position the status bar and battery
indicator relative to GfxRenderer::getScreenHeight() instead of
hard‑coded Y coordinates, so it stays correctly at the bottom in both
portrait and landscape.
◦ EPUB Caching / Layout
▪ Extended Section cache metadata (section.bin) to include the logical
screenWidth and screenHeight used when pages were generated; bumped
SECTION_FILE_VERSION.
▪ Updated loadCacheMetadata to compare:
▪ font/margins/line compression/extraParagraphSpacing and screen
dimensions; mismatches now invalidate and clear the cache.
▪ Updated persistPageDataToSD and all call sites in EpubReaderActivity
to pass the current GfxRenderer::getScreenWidth() / getScreenHeight() so
portrait and landscape caches are kept separate and correctly sized.
Additional Context
• Cache behavior / migration
◦ Existing section.bin files (old SECTION_FILE_VERSION) will be detected
as incompatible and their caches cleared and rebuilt once per chapter
when first opened after this change.
◦ Within a given orientation, caches will be reused as before. Switching
orientation (portrait ↔ landscape) will cause a one‑time re‑index of
each chapter in the new orientation.
• Scope and risks
◦ Orientation changes are scoped to the EPUB reader; the Home screen,
Settings, WiFi selection, sleep screens, and web server UI continue to
assume portrait orientation.
◦ The renderer’s orientation is a static/global setting; if future code
uses GfxRenderer outside the reader while a reader instance is active,
it should be aware that orientation is no longer implicitly fixed.
◦ All drawing primitives now go through orientation‑aware coordinate
transforms; any code that previously relied on edge‑case behavior or
out‑of‑bounds writes might surface as logged “Outside range” warnings
instead.
• Testing suggestions / areas to focus on
◦ Verify in hardware:
▪ Portrait mode still renders correctly (boot, home, settings, WiFi,
reader).
▪ Landscape reading in both directions:
▪ Landscape Reading = ON, Flip Landscape = OFF.
▪ Landscape Reading = ON, Flip Landscape = ON.
▪ Status bar (page X/Y, % progress, battery icon) is fully visible and
aligned at the bottom in all three combinations.
◦ Open the same book:
▪ In portrait first, then switch to landscape and reopen it.
▪ Confirm that:
▪ Old portrait caches are rebuilt once for landscape (you should see the
“Indexing…” page).
▪ Progress save/restore still works (resume opens to the correct page in
the current orientation).
◦ Ensure grayscale rendering (the secondary pass in
EpubReaderActivity::renderContents) still looks correct in both
orientations.
---------
Co-authored-by: Dave Allie <dave@daveallie.com>
2025-12-28 05:33:20 -05:00
|
|
|
const int pageItems = getPageItems();
|
2025-12-13 21:17:34 +11:00
|
|
|
|
2025-12-28 16:06:18 +10:00
|
|
|
if (inputManager.wasReleased(InputManager::BTN_CONFIRM)) {
|
2025-12-13 21:17:34 +11:00
|
|
|
onSelectSpineIndex(selectorIndex);
|
2025-12-28 16:06:18 +10:00
|
|
|
} else if (inputManager.wasReleased(InputManager::BTN_BACK)) {
|
2025-12-13 21:17:34 +11:00
|
|
|
onGoBack();
|
|
|
|
|
} else if (prevReleased) {
|
|
|
|
|
if (skipPage) {
|
|
|
|
|
selectorIndex =
|
Rotation Support (#77)
• What is the goal of this PR?
Implement a horizontal EPUB reading mode so books can be read in
landscape orientation (both 90° and 270°), while keeping the rest of the
UI in portrait.
• What changes are included?
◦ Rendering / Display
▪ Added an orientation model to GfxRenderer (Portrait, LandscapeNormal,
LandscapeFlipped) and made:
▪ drawPixel, drawImage, displayWindow map logical coordinates
differently depending on orientation.
▪ getScreenWidth() / getScreenHeight() return orientation‑aware logical
dimensions (480×800 in portrait, 800×480 in landscape).
◦ Settings / Configuration
▪ Extended CrossPointSettings with:
▪ landscapeReading (toggle for portrait vs. landscape EPUB reading).
▪ landscapeFlipped (toggle to flip landscape 180° so both horizontal
holding directions are supported).
▪ Updated settings serialization/deserialization to persist these fields
while remaining backward‑compatible with existing settings files.
▪ Updated SettingsActivity to expose two new toggles:
▪ “Landscape Reading”
▪ “Flip Landscape (swap top/bottom)”
◦ EPUB Reader
▪ In EpubReaderActivity:
▪ On onEnter, set GfxRenderer orientation based on the new settings
(Portrait, LandscapeNormal, or LandscapeFlipped).
▪ On onExit, reset orientation back to Portrait so Home, WiFi, Settings,
etc. continue to render as before.
▪ Adjusted renderStatusBar to position the status bar and battery
indicator relative to GfxRenderer::getScreenHeight() instead of
hard‑coded Y coordinates, so it stays correctly at the bottom in both
portrait and landscape.
◦ EPUB Caching / Layout
▪ Extended Section cache metadata (section.bin) to include the logical
screenWidth and screenHeight used when pages were generated; bumped
SECTION_FILE_VERSION.
▪ Updated loadCacheMetadata to compare:
▪ font/margins/line compression/extraParagraphSpacing and screen
dimensions; mismatches now invalidate and clear the cache.
▪ Updated persistPageDataToSD and all call sites in EpubReaderActivity
to pass the current GfxRenderer::getScreenWidth() / getScreenHeight() so
portrait and landscape caches are kept separate and correctly sized.
Additional Context
• Cache behavior / migration
◦ Existing section.bin files (old SECTION_FILE_VERSION) will be detected
as incompatible and their caches cleared and rebuilt once per chapter
when first opened after this change.
◦ Within a given orientation, caches will be reused as before. Switching
orientation (portrait ↔ landscape) will cause a one‑time re‑index of
each chapter in the new orientation.
• Scope and risks
◦ Orientation changes are scoped to the EPUB reader; the Home screen,
Settings, WiFi selection, sleep screens, and web server UI continue to
assume portrait orientation.
◦ The renderer’s orientation is a static/global setting; if future code
uses GfxRenderer outside the reader while a reader instance is active,
it should be aware that orientation is no longer implicitly fixed.
◦ All drawing primitives now go through orientation‑aware coordinate
transforms; any code that previously relied on edge‑case behavior or
out‑of‑bounds writes might surface as logged “Outside range” warnings
instead.
• Testing suggestions / areas to focus on
◦ Verify in hardware:
▪ Portrait mode still renders correctly (boot, home, settings, WiFi,
reader).
▪ Landscape reading in both directions:
▪ Landscape Reading = ON, Flip Landscape = OFF.
▪ Landscape Reading = ON, Flip Landscape = ON.
▪ Status bar (page X/Y, % progress, battery icon) is fully visible and
aligned at the bottom in all three combinations.
◦ Open the same book:
▪ In portrait first, then switch to landscape and reopen it.
▪ Confirm that:
▪ Old portrait caches are rebuilt once for landscape (you should see the
“Indexing…” page).
▪ Progress save/restore still works (resume opens to the correct page in
the current orientation).
◦ Ensure grayscale rendering (the secondary pass in
EpubReaderActivity::renderContents) still looks correct in both
orientations.
---------
Co-authored-by: Dave Allie <dave@daveallie.com>
2025-12-28 05:33:20 -05:00
|
|
|
((selectorIndex / pageItems - 1) * pageItems + epub->getSpineItemsCount()) % epub->getSpineItemsCount();
|
2025-12-13 21:17:34 +11:00
|
|
|
} else {
|
|
|
|
|
selectorIndex = (selectorIndex + epub->getSpineItemsCount() - 1) % epub->getSpineItemsCount();
|
|
|
|
|
}
|
|
|
|
|
updateRequired = true;
|
|
|
|
|
} else if (nextReleased) {
|
|
|
|
|
if (skipPage) {
|
Rotation Support (#77)
• What is the goal of this PR?
Implement a horizontal EPUB reading mode so books can be read in
landscape orientation (both 90° and 270°), while keeping the rest of the
UI in portrait.
• What changes are included?
◦ Rendering / Display
▪ Added an orientation model to GfxRenderer (Portrait, LandscapeNormal,
LandscapeFlipped) and made:
▪ drawPixel, drawImage, displayWindow map logical coordinates
differently depending on orientation.
▪ getScreenWidth() / getScreenHeight() return orientation‑aware logical
dimensions (480×800 in portrait, 800×480 in landscape).
◦ Settings / Configuration
▪ Extended CrossPointSettings with:
▪ landscapeReading (toggle for portrait vs. landscape EPUB reading).
▪ landscapeFlipped (toggle to flip landscape 180° so both horizontal
holding directions are supported).
▪ Updated settings serialization/deserialization to persist these fields
while remaining backward‑compatible with existing settings files.
▪ Updated SettingsActivity to expose two new toggles:
▪ “Landscape Reading”
▪ “Flip Landscape (swap top/bottom)”
◦ EPUB Reader
▪ In EpubReaderActivity:
▪ On onEnter, set GfxRenderer orientation based on the new settings
(Portrait, LandscapeNormal, or LandscapeFlipped).
▪ On onExit, reset orientation back to Portrait so Home, WiFi, Settings,
etc. continue to render as before.
▪ Adjusted renderStatusBar to position the status bar and battery
indicator relative to GfxRenderer::getScreenHeight() instead of
hard‑coded Y coordinates, so it stays correctly at the bottom in both
portrait and landscape.
◦ EPUB Caching / Layout
▪ Extended Section cache metadata (section.bin) to include the logical
screenWidth and screenHeight used when pages were generated; bumped
SECTION_FILE_VERSION.
▪ Updated loadCacheMetadata to compare:
▪ font/margins/line compression/extraParagraphSpacing and screen
dimensions; mismatches now invalidate and clear the cache.
▪ Updated persistPageDataToSD and all call sites in EpubReaderActivity
to pass the current GfxRenderer::getScreenWidth() / getScreenHeight() so
portrait and landscape caches are kept separate and correctly sized.
Additional Context
• Cache behavior / migration
◦ Existing section.bin files (old SECTION_FILE_VERSION) will be detected
as incompatible and their caches cleared and rebuilt once per chapter
when first opened after this change.
◦ Within a given orientation, caches will be reused as before. Switching
orientation (portrait ↔ landscape) will cause a one‑time re‑index of
each chapter in the new orientation.
• Scope and risks
◦ Orientation changes are scoped to the EPUB reader; the Home screen,
Settings, WiFi selection, sleep screens, and web server UI continue to
assume portrait orientation.
◦ The renderer’s orientation is a static/global setting; if future code
uses GfxRenderer outside the reader while a reader instance is active,
it should be aware that orientation is no longer implicitly fixed.
◦ All drawing primitives now go through orientation‑aware coordinate
transforms; any code that previously relied on edge‑case behavior or
out‑of‑bounds writes might surface as logged “Outside range” warnings
instead.
• Testing suggestions / areas to focus on
◦ Verify in hardware:
▪ Portrait mode still renders correctly (boot, home, settings, WiFi,
reader).
▪ Landscape reading in both directions:
▪ Landscape Reading = ON, Flip Landscape = OFF.
▪ Landscape Reading = ON, Flip Landscape = ON.
▪ Status bar (page X/Y, % progress, battery icon) is fully visible and
aligned at the bottom in all three combinations.
◦ Open the same book:
▪ In portrait first, then switch to landscape and reopen it.
▪ Confirm that:
▪ Old portrait caches are rebuilt once for landscape (you should see the
“Indexing…” page).
▪ Progress save/restore still works (resume opens to the correct page in
the current orientation).
◦ Ensure grayscale rendering (the secondary pass in
EpubReaderActivity::renderContents) still looks correct in both
orientations.
---------
Co-authored-by: Dave Allie <dave@daveallie.com>
2025-12-28 05:33:20 -05:00
|
|
|
selectorIndex = ((selectorIndex / pageItems + 1) * pageItems) % epub->getSpineItemsCount();
|
2025-12-13 21:17:34 +11:00
|
|
|
} else {
|
|
|
|
|
selectorIndex = (selectorIndex + 1) % epub->getSpineItemsCount();
|
|
|
|
|
}
|
|
|
|
|
updateRequired = true;
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
|
2025-12-17 23:32:18 +11:00
|
|
|
void EpubReaderChapterSelectionActivity::displayTaskLoop() {
|
2025-12-13 21:17:34 +11:00
|
|
|
while (true) {
|
|
|
|
|
if (updateRequired) {
|
|
|
|
|
updateRequired = false;
|
|
|
|
|
xSemaphoreTake(renderingMutex, portMAX_DELAY);
|
|
|
|
|
renderScreen();
|
|
|
|
|
xSemaphoreGive(renderingMutex);
|
|
|
|
|
}
|
|
|
|
|
vTaskDelay(10 / portTICK_PERIOD_MS);
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
|
2025-12-17 23:32:18 +11:00
|
|
|
void EpubReaderChapterSelectionActivity::renderScreen() {
|
2025-12-13 21:17:34 +11:00
|
|
|
renderer.clearScreen();
|
|
|
|
|
|
|
|
|
|
const auto pageWidth = renderer.getScreenWidth();
|
Rotation Support (#77)
• What is the goal of this PR?
Implement a horizontal EPUB reading mode so books can be read in
landscape orientation (both 90° and 270°), while keeping the rest of the
UI in portrait.
• What changes are included?
◦ Rendering / Display
▪ Added an orientation model to GfxRenderer (Portrait, LandscapeNormal,
LandscapeFlipped) and made:
▪ drawPixel, drawImage, displayWindow map logical coordinates
differently depending on orientation.
▪ getScreenWidth() / getScreenHeight() return orientation‑aware logical
dimensions (480×800 in portrait, 800×480 in landscape).
◦ Settings / Configuration
▪ Extended CrossPointSettings with:
▪ landscapeReading (toggle for portrait vs. landscape EPUB reading).
▪ landscapeFlipped (toggle to flip landscape 180° so both horizontal
holding directions are supported).
▪ Updated settings serialization/deserialization to persist these fields
while remaining backward‑compatible with existing settings files.
▪ Updated SettingsActivity to expose two new toggles:
▪ “Landscape Reading”
▪ “Flip Landscape (swap top/bottom)”
◦ EPUB Reader
▪ In EpubReaderActivity:
▪ On onEnter, set GfxRenderer orientation based on the new settings
(Portrait, LandscapeNormal, or LandscapeFlipped).
▪ On onExit, reset orientation back to Portrait so Home, WiFi, Settings,
etc. continue to render as before.
▪ Adjusted renderStatusBar to position the status bar and battery
indicator relative to GfxRenderer::getScreenHeight() instead of
hard‑coded Y coordinates, so it stays correctly at the bottom in both
portrait and landscape.
◦ EPUB Caching / Layout
▪ Extended Section cache metadata (section.bin) to include the logical
screenWidth and screenHeight used when pages were generated; bumped
SECTION_FILE_VERSION.
▪ Updated loadCacheMetadata to compare:
▪ font/margins/line compression/extraParagraphSpacing and screen
dimensions; mismatches now invalidate and clear the cache.
▪ Updated persistPageDataToSD and all call sites in EpubReaderActivity
to pass the current GfxRenderer::getScreenWidth() / getScreenHeight() so
portrait and landscape caches are kept separate and correctly sized.
Additional Context
• Cache behavior / migration
◦ Existing section.bin files (old SECTION_FILE_VERSION) will be detected
as incompatible and their caches cleared and rebuilt once per chapter
when first opened after this change.
◦ Within a given orientation, caches will be reused as before. Switching
orientation (portrait ↔ landscape) will cause a one‑time re‑index of
each chapter in the new orientation.
• Scope and risks
◦ Orientation changes are scoped to the EPUB reader; the Home screen,
Settings, WiFi selection, sleep screens, and web server UI continue to
assume portrait orientation.
◦ The renderer’s orientation is a static/global setting; if future code
uses GfxRenderer outside the reader while a reader instance is active,
it should be aware that orientation is no longer implicitly fixed.
◦ All drawing primitives now go through orientation‑aware coordinate
transforms; any code that previously relied on edge‑case behavior or
out‑of‑bounds writes might surface as logged “Outside range” warnings
instead.
• Testing suggestions / areas to focus on
◦ Verify in hardware:
▪ Portrait mode still renders correctly (boot, home, settings, WiFi,
reader).
▪ Landscape reading in both directions:
▪ Landscape Reading = ON, Flip Landscape = OFF.
▪ Landscape Reading = ON, Flip Landscape = ON.
▪ Status bar (page X/Y, % progress, battery icon) is fully visible and
aligned at the bottom in all three combinations.
◦ Open the same book:
▪ In portrait first, then switch to landscape and reopen it.
▪ Confirm that:
▪ Old portrait caches are rebuilt once for landscape (you should see the
“Indexing…” page).
▪ Progress save/restore still works (resume opens to the correct page in
the current orientation).
◦ Ensure grayscale rendering (the secondary pass in
EpubReaderActivity::renderContents) still looks correct in both
orientations.
---------
Co-authored-by: Dave Allie <dave@daveallie.com>
2025-12-28 05:33:20 -05:00
|
|
|
const int pageItems = getPageItems();
|
2025-12-13 21:17:34 +11:00
|
|
|
renderer.drawCenteredText(READER_FONT_ID, 10, "Select Chapter", true, BOLD);
|
|
|
|
|
|
Rotation Support (#77)
• What is the goal of this PR?
Implement a horizontal EPUB reading mode so books can be read in
landscape orientation (both 90° and 270°), while keeping the rest of the
UI in portrait.
• What changes are included?
◦ Rendering / Display
▪ Added an orientation model to GfxRenderer (Portrait, LandscapeNormal,
LandscapeFlipped) and made:
▪ drawPixel, drawImage, displayWindow map logical coordinates
differently depending on orientation.
▪ getScreenWidth() / getScreenHeight() return orientation‑aware logical
dimensions (480×800 in portrait, 800×480 in landscape).
◦ Settings / Configuration
▪ Extended CrossPointSettings with:
▪ landscapeReading (toggle for portrait vs. landscape EPUB reading).
▪ landscapeFlipped (toggle to flip landscape 180° so both horizontal
holding directions are supported).
▪ Updated settings serialization/deserialization to persist these fields
while remaining backward‑compatible with existing settings files.
▪ Updated SettingsActivity to expose two new toggles:
▪ “Landscape Reading”
▪ “Flip Landscape (swap top/bottom)”
◦ EPUB Reader
▪ In EpubReaderActivity:
▪ On onEnter, set GfxRenderer orientation based on the new settings
(Portrait, LandscapeNormal, or LandscapeFlipped).
▪ On onExit, reset orientation back to Portrait so Home, WiFi, Settings,
etc. continue to render as before.
▪ Adjusted renderStatusBar to position the status bar and battery
indicator relative to GfxRenderer::getScreenHeight() instead of
hard‑coded Y coordinates, so it stays correctly at the bottom in both
portrait and landscape.
◦ EPUB Caching / Layout
▪ Extended Section cache metadata (section.bin) to include the logical
screenWidth and screenHeight used when pages were generated; bumped
SECTION_FILE_VERSION.
▪ Updated loadCacheMetadata to compare:
▪ font/margins/line compression/extraParagraphSpacing and screen
dimensions; mismatches now invalidate and clear the cache.
▪ Updated persistPageDataToSD and all call sites in EpubReaderActivity
to pass the current GfxRenderer::getScreenWidth() / getScreenHeight() so
portrait and landscape caches are kept separate and correctly sized.
Additional Context
• Cache behavior / migration
◦ Existing section.bin files (old SECTION_FILE_VERSION) will be detected
as incompatible and their caches cleared and rebuilt once per chapter
when first opened after this change.
◦ Within a given orientation, caches will be reused as before. Switching
orientation (portrait ↔ landscape) will cause a one‑time re‑index of
each chapter in the new orientation.
• Scope and risks
◦ Orientation changes are scoped to the EPUB reader; the Home screen,
Settings, WiFi selection, sleep screens, and web server UI continue to
assume portrait orientation.
◦ The renderer’s orientation is a static/global setting; if future code
uses GfxRenderer outside the reader while a reader instance is active,
it should be aware that orientation is no longer implicitly fixed.
◦ All drawing primitives now go through orientation‑aware coordinate
transforms; any code that previously relied on edge‑case behavior or
out‑of‑bounds writes might surface as logged “Outside range” warnings
instead.
• Testing suggestions / areas to focus on
◦ Verify in hardware:
▪ Portrait mode still renders correctly (boot, home, settings, WiFi,
reader).
▪ Landscape reading in both directions:
▪ Landscape Reading = ON, Flip Landscape = OFF.
▪ Landscape Reading = ON, Flip Landscape = ON.
▪ Status bar (page X/Y, % progress, battery icon) is fully visible and
aligned at the bottom in all three combinations.
◦ Open the same book:
▪ In portrait first, then switch to landscape and reopen it.
▪ Confirm that:
▪ Old portrait caches are rebuilt once for landscape (you should see the
“Indexing…” page).
▪ Progress save/restore still works (resume opens to the correct page in
the current orientation).
◦ Ensure grayscale rendering (the secondary pass in
EpubReaderActivity::renderContents) still looks correct in both
orientations.
---------
Co-authored-by: Dave Allie <dave@daveallie.com>
2025-12-28 05:33:20 -05:00
|
|
|
const auto pageStartIndex = selectorIndex / pageItems * pageItems;
|
2025-12-28 21:30:01 +10:00
|
|
|
renderer.fillRect(0, 60 + (selectorIndex % pageItems) * 30 - 2, pageWidth - 1, 30);
|
Rotation Support (#77)
• What is the goal of this PR?
Implement a horizontal EPUB reading mode so books can be read in
landscape orientation (both 90° and 270°), while keeping the rest of the
UI in portrait.
• What changes are included?
◦ Rendering / Display
▪ Added an orientation model to GfxRenderer (Portrait, LandscapeNormal,
LandscapeFlipped) and made:
▪ drawPixel, drawImage, displayWindow map logical coordinates
differently depending on orientation.
▪ getScreenWidth() / getScreenHeight() return orientation‑aware logical
dimensions (480×800 in portrait, 800×480 in landscape).
◦ Settings / Configuration
▪ Extended CrossPointSettings with:
▪ landscapeReading (toggle for portrait vs. landscape EPUB reading).
▪ landscapeFlipped (toggle to flip landscape 180° so both horizontal
holding directions are supported).
▪ Updated settings serialization/deserialization to persist these fields
while remaining backward‑compatible with existing settings files.
▪ Updated SettingsActivity to expose two new toggles:
▪ “Landscape Reading”
▪ “Flip Landscape (swap top/bottom)”
◦ EPUB Reader
▪ In EpubReaderActivity:
▪ On onEnter, set GfxRenderer orientation based on the new settings
(Portrait, LandscapeNormal, or LandscapeFlipped).
▪ On onExit, reset orientation back to Portrait so Home, WiFi, Settings,
etc. continue to render as before.
▪ Adjusted renderStatusBar to position the status bar and battery
indicator relative to GfxRenderer::getScreenHeight() instead of
hard‑coded Y coordinates, so it stays correctly at the bottom in both
portrait and landscape.
◦ EPUB Caching / Layout
▪ Extended Section cache metadata (section.bin) to include the logical
screenWidth and screenHeight used when pages were generated; bumped
SECTION_FILE_VERSION.
▪ Updated loadCacheMetadata to compare:
▪ font/margins/line compression/extraParagraphSpacing and screen
dimensions; mismatches now invalidate and clear the cache.
▪ Updated persistPageDataToSD and all call sites in EpubReaderActivity
to pass the current GfxRenderer::getScreenWidth() / getScreenHeight() so
portrait and landscape caches are kept separate and correctly sized.
Additional Context
• Cache behavior / migration
◦ Existing section.bin files (old SECTION_FILE_VERSION) will be detected
as incompatible and their caches cleared and rebuilt once per chapter
when first opened after this change.
◦ Within a given orientation, caches will be reused as before. Switching
orientation (portrait ↔ landscape) will cause a one‑time re‑index of
each chapter in the new orientation.
• Scope and risks
◦ Orientation changes are scoped to the EPUB reader; the Home screen,
Settings, WiFi selection, sleep screens, and web server UI continue to
assume portrait orientation.
◦ The renderer’s orientation is a static/global setting; if future code
uses GfxRenderer outside the reader while a reader instance is active,
it should be aware that orientation is no longer implicitly fixed.
◦ All drawing primitives now go through orientation‑aware coordinate
transforms; any code that previously relied on edge‑case behavior or
out‑of‑bounds writes might surface as logged “Outside range” warnings
instead.
• Testing suggestions / areas to focus on
◦ Verify in hardware:
▪ Portrait mode still renders correctly (boot, home, settings, WiFi,
reader).
▪ Landscape reading in both directions:
▪ Landscape Reading = ON, Flip Landscape = OFF.
▪ Landscape Reading = ON, Flip Landscape = ON.
▪ Status bar (page X/Y, % progress, battery icon) is fully visible and
aligned at the bottom in all three combinations.
◦ Open the same book:
▪ In portrait first, then switch to landscape and reopen it.
▪ Confirm that:
▪ Old portrait caches are rebuilt once for landscape (you should see the
“Indexing…” page).
▪ Progress save/restore still works (resume opens to the correct page in
the current orientation).
◦ Ensure grayscale rendering (the secondary pass in
EpubReaderActivity::renderContents) still looks correct in both
orientations.
---------
Co-authored-by: Dave Allie <dave@daveallie.com>
2025-12-28 05:33:20 -05:00
|
|
|
for (int i = pageStartIndex; i < epub->getSpineItemsCount() && i < pageStartIndex + pageItems; i++) {
|
2025-12-13 21:17:34 +11:00
|
|
|
const int tocIndex = epub->getTocIndexForSpineIndex(i);
|
|
|
|
|
if (tocIndex == -1) {
|
Rotation Support (#77)
• What is the goal of this PR?
Implement a horizontal EPUB reading mode so books can be read in
landscape orientation (both 90° and 270°), while keeping the rest of the
UI in portrait.
• What changes are included?
◦ Rendering / Display
▪ Added an orientation model to GfxRenderer (Portrait, LandscapeNormal,
LandscapeFlipped) and made:
▪ drawPixel, drawImage, displayWindow map logical coordinates
differently depending on orientation.
▪ getScreenWidth() / getScreenHeight() return orientation‑aware logical
dimensions (480×800 in portrait, 800×480 in landscape).
◦ Settings / Configuration
▪ Extended CrossPointSettings with:
▪ landscapeReading (toggle for portrait vs. landscape EPUB reading).
▪ landscapeFlipped (toggle to flip landscape 180° so both horizontal
holding directions are supported).
▪ Updated settings serialization/deserialization to persist these fields
while remaining backward‑compatible with existing settings files.
▪ Updated SettingsActivity to expose two new toggles:
▪ “Landscape Reading”
▪ “Flip Landscape (swap top/bottom)”
◦ EPUB Reader
▪ In EpubReaderActivity:
▪ On onEnter, set GfxRenderer orientation based on the new settings
(Portrait, LandscapeNormal, or LandscapeFlipped).
▪ On onExit, reset orientation back to Portrait so Home, WiFi, Settings,
etc. continue to render as before.
▪ Adjusted renderStatusBar to position the status bar and battery
indicator relative to GfxRenderer::getScreenHeight() instead of
hard‑coded Y coordinates, so it stays correctly at the bottom in both
portrait and landscape.
◦ EPUB Caching / Layout
▪ Extended Section cache metadata (section.bin) to include the logical
screenWidth and screenHeight used when pages were generated; bumped
SECTION_FILE_VERSION.
▪ Updated loadCacheMetadata to compare:
▪ font/margins/line compression/extraParagraphSpacing and screen
dimensions; mismatches now invalidate and clear the cache.
▪ Updated persistPageDataToSD and all call sites in EpubReaderActivity
to pass the current GfxRenderer::getScreenWidth() / getScreenHeight() so
portrait and landscape caches are kept separate and correctly sized.
Additional Context
• Cache behavior / migration
◦ Existing section.bin files (old SECTION_FILE_VERSION) will be detected
as incompatible and their caches cleared and rebuilt once per chapter
when first opened after this change.
◦ Within a given orientation, caches will be reused as before. Switching
orientation (portrait ↔ landscape) will cause a one‑time re‑index of
each chapter in the new orientation.
• Scope and risks
◦ Orientation changes are scoped to the EPUB reader; the Home screen,
Settings, WiFi selection, sleep screens, and web server UI continue to
assume portrait orientation.
◦ The renderer’s orientation is a static/global setting; if future code
uses GfxRenderer outside the reader while a reader instance is active,
it should be aware that orientation is no longer implicitly fixed.
◦ All drawing primitives now go through orientation‑aware coordinate
transforms; any code that previously relied on edge‑case behavior or
out‑of‑bounds writes might surface as logged “Outside range” warnings
instead.
• Testing suggestions / areas to focus on
◦ Verify in hardware:
▪ Portrait mode still renders correctly (boot, home, settings, WiFi,
reader).
▪ Landscape reading in both directions:
▪ Landscape Reading = ON, Flip Landscape = OFF.
▪ Landscape Reading = ON, Flip Landscape = ON.
▪ Status bar (page X/Y, % progress, battery icon) is fully visible and
aligned at the bottom in all three combinations.
◦ Open the same book:
▪ In portrait first, then switch to landscape and reopen it.
▪ Confirm that:
▪ Old portrait caches are rebuilt once for landscape (you should see the
“Indexing…” page).
▪ Progress save/restore still works (resume opens to the correct page in
the current orientation).
◦ Ensure grayscale rendering (the secondary pass in
EpubReaderActivity::renderContents) still looks correct in both
orientations.
---------
Co-authored-by: Dave Allie <dave@daveallie.com>
2025-12-28 05:33:20 -05:00
|
|
|
renderer.drawText(UI_FONT_ID, 20, 60 + (i % pageItems) * 30, "Unnamed", i != selectorIndex);
|
2025-12-13 21:17:34 +11:00
|
|
|
} else {
|
|
|
|
|
auto item = epub->getTocItem(tocIndex);
|
Rotation Support (#77)
• What is the goal of this PR?
Implement a horizontal EPUB reading mode so books can be read in
landscape orientation (both 90° and 270°), while keeping the rest of the
UI in portrait.
• What changes are included?
◦ Rendering / Display
▪ Added an orientation model to GfxRenderer (Portrait, LandscapeNormal,
LandscapeFlipped) and made:
▪ drawPixel, drawImage, displayWindow map logical coordinates
differently depending on orientation.
▪ getScreenWidth() / getScreenHeight() return orientation‑aware logical
dimensions (480×800 in portrait, 800×480 in landscape).
◦ Settings / Configuration
▪ Extended CrossPointSettings with:
▪ landscapeReading (toggle for portrait vs. landscape EPUB reading).
▪ landscapeFlipped (toggle to flip landscape 180° so both horizontal
holding directions are supported).
▪ Updated settings serialization/deserialization to persist these fields
while remaining backward‑compatible with existing settings files.
▪ Updated SettingsActivity to expose two new toggles:
▪ “Landscape Reading”
▪ “Flip Landscape (swap top/bottom)”
◦ EPUB Reader
▪ In EpubReaderActivity:
▪ On onEnter, set GfxRenderer orientation based on the new settings
(Portrait, LandscapeNormal, or LandscapeFlipped).
▪ On onExit, reset orientation back to Portrait so Home, WiFi, Settings,
etc. continue to render as before.
▪ Adjusted renderStatusBar to position the status bar and battery
indicator relative to GfxRenderer::getScreenHeight() instead of
hard‑coded Y coordinates, so it stays correctly at the bottom in both
portrait and landscape.
◦ EPUB Caching / Layout
▪ Extended Section cache metadata (section.bin) to include the logical
screenWidth and screenHeight used when pages were generated; bumped
SECTION_FILE_VERSION.
▪ Updated loadCacheMetadata to compare:
▪ font/margins/line compression/extraParagraphSpacing and screen
dimensions; mismatches now invalidate and clear the cache.
▪ Updated persistPageDataToSD and all call sites in EpubReaderActivity
to pass the current GfxRenderer::getScreenWidth() / getScreenHeight() so
portrait and landscape caches are kept separate and correctly sized.
Additional Context
• Cache behavior / migration
◦ Existing section.bin files (old SECTION_FILE_VERSION) will be detected
as incompatible and their caches cleared and rebuilt once per chapter
when first opened after this change.
◦ Within a given orientation, caches will be reused as before. Switching
orientation (portrait ↔ landscape) will cause a one‑time re‑index of
each chapter in the new orientation.
• Scope and risks
◦ Orientation changes are scoped to the EPUB reader; the Home screen,
Settings, WiFi selection, sleep screens, and web server UI continue to
assume portrait orientation.
◦ The renderer’s orientation is a static/global setting; if future code
uses GfxRenderer outside the reader while a reader instance is active,
it should be aware that orientation is no longer implicitly fixed.
◦ All drawing primitives now go through orientation‑aware coordinate
transforms; any code that previously relied on edge‑case behavior or
out‑of‑bounds writes might surface as logged “Outside range” warnings
instead.
• Testing suggestions / areas to focus on
◦ Verify in hardware:
▪ Portrait mode still renders correctly (boot, home, settings, WiFi,
reader).
▪ Landscape reading in both directions:
▪ Landscape Reading = ON, Flip Landscape = OFF.
▪ Landscape Reading = ON, Flip Landscape = ON.
▪ Status bar (page X/Y, % progress, battery icon) is fully visible and
aligned at the bottom in all three combinations.
◦ Open the same book:
▪ In portrait first, then switch to landscape and reopen it.
▪ Confirm that:
▪ Old portrait caches are rebuilt once for landscape (you should see the
“Indexing…” page).
▪ Progress save/restore still works (resume opens to the correct page in
the current orientation).
◦ Ensure grayscale rendering (the secondary pass in
EpubReaderActivity::renderContents) still looks correct in both
orientations.
---------
Co-authored-by: Dave Allie <dave@daveallie.com>
2025-12-28 05:33:20 -05:00
|
|
|
renderer.drawText(UI_FONT_ID, 20 + (item.level - 1) * 15, 60 + (i % pageItems) * 30, item.title.c_str(),
|
2025-12-13 21:17:34 +11:00
|
|
|
i != selectorIndex);
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
renderer.displayBuffer();
|
|
|
|
|
}
|