1st pass eberle qls mount

outdoor/eberleMount.scad

@@ -0,0 +1,75 @@
+// Simple c shaped clip to insert into molle and mount QRS to.
+// Ref: Hole spacing upper 31.8mm apart, lower 64.6mm below midpoint of upper, try 6mm holes
+//
+// Strategy:
+// 3 cylinders at hole spacing
+// 3 boxes with c shape
+// minkowski all
+// cut holes, slice top and bottom
+// so backwards: diff 2 slices and holes, minkowski, then make the 3 cylinders and 3 cubes
+
+$fn = 40;
+qlsHoriz = 31.8;
+qlsVert = 64.6;
+qlsShiftX = 4;
+qlsShiftY = 63;
+qlsCant = 9.1;
+
+minkRad = 4;
+thickness = 5;
+armSize = 15;
+armCtc = 37;
+armLength = 126;
+
+// QLS spaced cylinders for add or remove
+module qls(diam = 6) {
+  translate([qlsHoriz / 2, qlsVert / 2, 0]){
+    cylinder(44, d = diam, center = true);
+    }
+  translate([-1 * qlsHoriz / 2, qlsVert / 2, 0]){
+    cylinder(44, d = diam, center = true);
+    }
+  translate([0, -qlsVert / 2]){
+    cylinder(44, d = diam, center = true);
+    }
+  }
+  module tcqls(diam = 6) {
+    translate([qlsShiftX, qlsShiftY, 0]){
+      rotate(qlsCant, [0, 0, 1]){
+        qls(diam);
+        }
+      }
+    }
+
+// main diff
+difference() {
+  // diff the minkowskid collection and two slice plates and some qls holes
+  minkowski() {
+    // minkowski the 6 part union and a sphere
+    union() {
+      // union of 3 cubes and 3 cylinders from qls
+      translate([ armCtc / 2, armLength / 2, 0 ]) {
+        cube([ armSize - minkRad * 2, armLength - minkRad * 2, 1 ], center = true);
+        }
+      translate([ -armCtc / 2, armLength / 2, 0 ]) {
+        cube([ armSize - minkRad * 2, armLength - minkRad * 2, 1 ], center = true);
+        }
+      translate([ 0, armLength - armSize / 2, 0 ]) {
+        cube([ armCtc + armSize - minkRad * 2 , armSize - minkRad * 2, 1], center = true);
+        }
+      tcqls(12 - minkRad);
+      }
+
+    // mink sphere
+    sphere(minkRad);
+    }
+  // diffed top bottom slices and qls screw holes
+  translate([0, 0, -33 - thickness / 2]){
+    cube([444, 444, 66], center = true);
+    }
+  translate([0, 0, 33 + thickness / 2]){
+    cube([444, 444, 66], center = true);
+    }
+  tcqls(7);
+ 
+  }

outdoor/m7LeatherClip.scad

@@ -0,0 +1,52 @@
+// Cord toggle for securing grommet equipment
+
+mainDiam=10;
+mainLength=20;
+cordDiam=3;
+cordHoleGap=1;
+flattenBottom=0.3;
+$fn = 40;
+
+difference(){
+
+// cyl mirrored across yz +++++++++++++++++++++++++++++++++++++++++++
+color("blue"){
+  for (dir = [-1 : 1] ) mirror([dir, 0, 0]){
+    union(){
+      rotate([0,90,0]){
+          cylinder(mainLength / 2, d = mainDiam, center=false);
+      }
+      // rounded ends
+      translate([mainLength / 2, 0, 0]){
+        sphere(d = mainDiam);
+      }
+    }
+  }
+}
+
+// flatten bottom for better print and interface ---------------------------
+color("red"){
+  translate([0, 0, -1 * (1 - flattenBottom) * mainDiam]){
+    cube( [2 * mainLength, mainDiam, mainDiam], center=true);
+  }
+}
+
+//holes for cord
+color("green"){
+    for (dir = [-1 : 1]) mirror([dir, 0, 0]){
+        translate([cordHoleGap * cordDiam, 0, 0]){
+          cylinder( mainDiam * 1.1, d = cordDiam, center = true);
+
+        }
+    }
+}
+
+//relief for cord bend
+color("yellow"){
+    translate([0, 0, mainDiam / 2]){
+        rotate([0, 90, 0]){
+            cylinder(cordDiam * cordHoleGap * 2, d = cordDiam, center = true);
+          }
+      }
+  }
+}

pc/kbd_spacer.scad

@@ -6,20 +6,14 @@
 screwDiam=2.2;
 eeWidth=5;
 thickness=3.7;
-
 $fn = 40;
 
 difference(){
-
   cube([eeWidth, eeWidth, thickness * 2], center=true);
-
   translate([0, 0, -22]){
       cylinder(d=screwDiam, 44);
     }
-
   translate([0, 0, -22]){
       cube([44, 44, 44], center=true);
     }
-  
-
   }